13A278XS099 - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
1 deck belt cover fell off and the other rusted and loosening
Removed the retaining screws on both belt covers and replaced them with the new ones i purchased.
Parts Used:
-
J. Alonzo from TULALIP, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oil Drain Sleeve
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Parts Used:
-
Laurie from RICHLANDS, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable), Wrench set
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Seized bearing and spacer on bolt shaft for idler pulley
Unfortunately I couldn’t find the spacer on the Internet, so I ended up going to the hardware store and buying multiple sizes of spacers and bearings to complete the install. I ended up using a steel spacer with shoulder and two bearings. Way overkill, but worth the three dollars.
Parts Used:
-
Carl from DECATUR, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
-
Randall from GALLIPOLIS, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!