Models > 130202-1575-01

130202-1575-01 Briggs and Stratton Engine - Overview

Models starting with 130202-1575-01

Keep searches simple, eg. "belt" or "pump".
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.99
  In Stock
Grommet – Part Number: 692189
Grommet
★★★★★
★★★★★
(1)
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$5.34
  In Stock
Carburetor Rebuild Kit – Part Number: 495606
Carburetor Rebuild Kit
★★★★★
★★★★★
(1)
PartSelect #: PS8983479
Manufacturer #: 495606
This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish you...
$36.73
  In Stock
Grommet – Part Number: 692187
Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and ...
$5.34
  In Stock
Diaphragm-Carburetor – Part Number: 270026
Diaphragm-Carburetor
★★★★★
★★★★★
(3)
PartSelect #: PS8937201
Manufacturer #: 270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and ...
$3.99
  In Stock
Tube-Pick Up – Part Number: 391813
Tube-Pick Up
PartSelect #: PS8966338
Manufacturer #: 391813
  No Longer Available
Spring-Rewind Str – Part Number: 490179
Spring-Rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
$15.43
  In Stock
Pulley-Starter – Part Number: 295871
Pulley-Starter
PartSelect #: PS8942071
Manufacturer #: 295871
$15.80
  In Stock
Gasket-Fuel Tank – Part Number: 272409S
Gasket-Fuel Tank
PartSelect #: PS8943841
Manufacturer #: 272409S
This fuel tank gasket is an OEM part certified by the manufacturer, and it provides a seal on the gas tank and carburetor of your machine. This fuel tank gasket is gray in color and made of composit...
$5.10
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Gasket-Cylinder Head – Part Number: 272157S
Gasket-Cylinder Head
PartSelect #: PS8941204
Manufacturer #: 272157S
The cylinder head gasket, also known just as the head gasket, is an OEM part sold individually. Grey in color, the head gasket provides a seal between the cylinder head and the engine block in your en...
$6.91
  In Stock
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$37.32
  In Stock

Common Symptoms of models starting with 130202-1575-01

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
Magneto
  • Thomas from ALFRED, ME
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old diaphragm dried up
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the kit but it had what I needed.
Parts Used:
Carburetor Rebuild Kit
  • Steven C from CENTREVILLE, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Muffler rusted out
hand tightened with threads into threaded insert
Parts Used:
Exhaust Muffler S/A 39
  • Snoopy from TYRONE, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!