Models
>
12AGB26G704
12AGB26G704 (2012) MTD Lawn Mower - Overview
Sections of the 12AGB26G704
[Viewing 3 of 3]_WW_1.gif "General_Assembly_12Axb2X Diagram and Parts List for 2012 MTD Lawn Mower")
_WW_2.gif "Label_Map_12Agb26G704 Diagram and Parts List for 2012 MTD Lawn Mower")
_WW_3.gif "Quick_Reference_12Axb2X Diagram and Parts List for 2012 MTD Lawn Mower")
Keep searches simple, eg. "belt" or "pump".
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
$32.37
In Stock
Hinged Mulch Plug Assembly
PartSelect #: PS10037714
Manufacturer #: 987-02516A
This OEM Hinged Mulch Plug Assembly includes both the plug and the spring. It is a black, plastic assembly which is rated as "Easy" to install, requiring a screwdriver, and socket set. This part seals...
No Longer Available
Lawn Mower Zone Control Cable
PartSelect #: PS9180334
Manufacturer #: 946-1130
This zone control cable is for lawn mowers.
Zone control cable stops the engine when you let go of the handle.
Wear work gloves to protect your hands during this repair.
$17.50
In Stock
Control Cable, 37.58", 148Cc Engine
PartSelect #: PS10033966
Manufacturer #: 946-04661A
No Longer Available
Trail shield
PartSelect #: PS9103444
Manufacturer #: 731-07203
This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without...
$10.29
In Stock
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$5.84
In Stock
Rear Axle Assembly
PartSelect #: PS10023414
Manufacturer #: 911-04144B
Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate.
This part replaces part numbers 911-04144 and 911-04144A.
Wear work gloves to protect your hands when installing this part.
$33.18
On Order
Questions And Answers for 12AGB26G704
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 12AGB26G704
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz
... Read more
le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read less
Parts Used:
-
Dan from LAKEWOOD, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!