Models
>
11A-B2AQ711
11A-B2AQ711 Troy-Bilt Lawn Mower - Overview
Models starting with 11A-B2AQ711
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Grass Bag
PartSelect #: PS10036233
Manufacturer #: 964-04117B
This grass bag comes in black fabric, and is manufacturer-certified and individually sold. It's used to collect grass clippings. If there are any holes in our bag, you'll need to replace it. The bag a...
No Longer Available
Discharge Chute
PartSelect #: PS9454662
Manufacturer #: 731-07131
The Side Discharge Chute is a manufacturer certified black plastic part used to direct glass clippings out from unde the deck of the mower, which is rated as "Easy" to install. If broken or damaged, i...
No Longer Available
Hinged Mulch Plug Assembly
PartSelect #: PS10037714
Manufacturer #: 987-02516A
This OEM Hinged Mulch Plug Assembly includes both the plug and the spring. It is a black, plastic assembly which is rated as "Easy" to install, requiring a screwdriver, and socket set. This part seals...
No Longer Available
Rear Axle Assembly
PartSelect #: PS10023414
Manufacturer #: 911-04144B
Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate.
This part replaces part numbers 911-04144 and 911-04144A.
Wear work gloves to protect your hands when installing this part.
$33.18
On Order
Lawn Mower Zone Control Cable
PartSelect #: PS10033965
Manufacturer #: 946-04661A
This zone control cable is for lawnmowers.
The zone control cable stops the engine when you let go of the handle.
Wear work gloves to protect your hands during this repair.
No Longer Available
Pin-Hinge
PartSelect #: PS9455906
Manufacturer #: 747-0710A
This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inch...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Motor built by Honda ran perfectly...deck was totally rusted and rotten
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck u
... Read more
ndercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Read less
Parts Used:
-
Mike from NORFOLK, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken adjustment lever
Placed on stands to hold mower up, then removed wheels and clips, then placed new axle in place and replaced clips and wheels.
Parts Used:
-
Tim from SPOKANE VLY, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!