Models > 1149-0

1149-0 Briggs and Stratton Generator - Overview

Sections of the 1149-0

[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
★★★★★
★★★★★
(3)
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$16.75
  In Stock
Connector-Hose – Part Number: 692317
Connector-Hose
★★★★★
★★★★★
(1)
PartSelect #: PS9074730
Manufacturer #: 692317
$7.29
  In Stock
Spring-Rewind Str – Part Number: 490179
Spring-Rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
$14.83
  In Stock
Gasket-Float Bowl – Part Number: 281165S
Gasket-Float Bowl
★★★★★
★★★★★
(1)
PartSelect #: PS8945656
Manufacturer #: 281165S
$5.38
  Special Order
Seal,Oil – Part Number: 391086S
Seal,Oil
PartSelect #: PS9277860
Manufacturer #: 391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "M...
$6.57
  In Stock
Pulley-Starter – Part Number: 295871
Pulley-Starter
PartSelect #: PS8942071
Manufacturer #: 295871
$18.30
  In Stock
Filter--Fuel (White, 75 Microns) – Part Number: 394358S
Filter--Fuel (White, 75 Microns)
PartSelect #: PS9278033
Manufacturer #: 394358S
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...   No Longer Available
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$35.30
  In Stock
Line-Fuel – Part Number: 791745
Line-Fuel
PartSelect #: PS9140673
Manufacturer #: 791745
$10.52
  In Stock
Armature-Magneto – Part Number: 591459
Armature-Magneto
★★★★★
★★★★★
(1)
PartSelect #: PS9045176
Manufacturer #: 591459
$59.25
  In Stock
Bowl-Float – Part Number: 495933
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS8983295
Manufacturer #: 495933
$11.72
  In Stock
Gasket-Breather – Part Number: 27803S
Gasket-Breather
PartSelect #: PS8941097
Manufacturer #: 27803S
$3.99
  In Stock

Questions And Answers for 1149-0

Be the first to ask our experts a question about this model!

Common Symptoms of the 1149-0

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Parts Used:
Fuel Valve W/Bushing
  • James from PICAYUNE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
major gas leak on my generator
popped out the old-----the bushing failed. replaced as per the included instructions
Parts Used:
Fuel Valve W/Bushing
  • John from LEES SUMMIT, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket- Exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
3 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!