11084832201 Kenmore Dryer - Instructions

After reading the repair suggestions I ordered the parts. Thinking my dryer would be down for a long time, the parts came within 48 hours. With the video's help the repair took less than an hour. Part select is a great company to deal with. Thanks

Replacing the filter was easy - the new filtes's seal seems much more secure. The new one works much better than the old one.

Got online with parts select, easily found the parts needed and ordered them. They arrived very quickly. The repair itself took all of 5 minutes and now the dryer door stays shut like it is supposed to. Only complaint is shipping was more than the parts but then again, I didn't waste a lot of time running all over town looking for what I needed. So, in the long run I saved money , especially when compared to a calling someone else to fix it.(big bucks for even the most minor service call as you all know).

Remove the small screws on inside of the door, removed 2 screws on the handled. Replaced broken handle with new one. Screwed all screws. Easy th follow instructions

My husband changed the idler pulley. It took him 5 min. Thank you sooooooooooo much. Saved us 1000.00 dollars. He wanted to by a new one but investigated the problem on line. He is a handyman and was just being lazy. I ordered the part and he fixed it. I love saving money!!!!!!!!!!!!! And I love my husband!!!!!!!!!!!!!!

pop off put in done

Opened up unit and followed tech directions on inside pocket to isolate the problem to the heating element. Pulled it out and sure enough it was broken in one place. Found the part on PartSelect and ordered it on Saturday, received it on Wednesday. Replaced the new heating element into the assembly, reinstalled the assembly and connected the wires. Works like new now!

Removed power cord. Removed screws in back cover. Checked electrical diagram. Found fuse, checked. New part arrived promptly on time. Was correct part. Tested before instalation. removed one screw that held fuse. unpluged the two wires. Repluged wires, reinstalled screw.on new fuse, replaced back cover and screws. recoupled power, tested. ran perfect.

I removed the back of the dryer (after unplugging and shutting off the gas valve) I vacuumed any fuzz and debris. I also removed the dryer vent and cleaned that too. I unscrewed the thermal fuse and replaced it with the new one. I wiped everything down and replaced the back and ran the dryer and it worked! Thanks for your help and for saving me money! My husband was so glad we didn't have to call a service man we celebrated by going out to dinner!

parts were for a dryer that would not tumble or heat they did not fix problem have called in pro hope he can fix

Took out the old one and put in the new one.

I thought that I was going to have to buy a new dryer or rather a used one to replace my dryer when it stopped heating. I knew I could not afford an appliance repair person to come out to the house, so I searched for my appliance on the internet for repair parts. Your website helped me to figure out the part that I needed to replace; i.e. the thermal fuse for $9. Since you advertised that you took return parts, I placed my order. Without any hassle short of the obvious moving the dryer away from the wall and removing the back panel I was able to do this in a short time. I was so excited to realize that my dryer was heating up. Thank you.

I removed the back panel from back of dryer, unplugged the thermal fuse as shown in YouTube instructional video. Put back panel back on, plugged in dryer. Started workimf right away. Could not have been easier! The whole process from troubleshooting the problem to oderimg and installing the part was surprisingly easy. Thanks so much! Best service I have gotten in  a long time.

I assumed a fuse was bad, although there were 3 possible fuses that might have caused the problem. I tested the Thermal Fuse #PS345113 and it was shot...the others were ok. I ordered a new fuse and everything works fine. The timer was not working on only the heated cycles but the new fuse fixed that as well. This took a bit longer than it should have because it included a lot of cleanup and moving an adjacent washing machine as well.

following the repair video made it super easy. thanks!