Models > 11084722400

11084722400 Kenmore Dryer - Overview

Sections of the 11084722400

[Viewing 3 of 3]

Manuals & Care Guides for 11084722400

Click to download
Keep searches simple, eg. "belt" or "pump".
Door Catch Kit – Part Number: 279570
Door Catch Kit
★★★★★
★★★★★
(125)
PartSelect #: PS334230
Manufacturer #: 279570
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, ...
$5.04
  In Stock
Rear Drum Support Roller Kit – Part Number: 349241T
Rear Drum Support Roller Kit
★★★★★
★★★★★
(117)
PartSelect #: PS347627
Manufacturer #: 349241T
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining washer). The kit does n...
$14.37
  In Stock
Idler Pulley Assembly – Part Number: WP691366
Idler Pulley Assembly
★★★★★
★★★★★
(22)
PartSelect #: PS11743765
Manufacturer #: WP691366
This part provides the tension required for a multi-ribbed belt. It also helps the belt rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumble, takes too long t...
$17.64
  In Stock
Roller Support Tri-Ring – Part Number: WPW10512946
Roller Support Tri-Ring
★★★★★
★★★★★
(5)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.42
  In Stock
Dryer Lint Filter and Cover – Part Number: W10828351
Dryer Lint Filter and Cover
★★★★★
★★★★★
(48)
PartSelect #: PS11726200
Manufacturer #: W10828351
Cover and filter as an assembly. It is used in dryer, If the lint filter cover is damaged or cracked, it should be replaced.
$54.44
  In Stock
Heating Element Connection Wire Kit – Part Number: 279457
Heating Element Connection Wire Kit
★★★★★
★★★★★
(3)
PartSelect #: PS334206
Manufacturer #: 279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$11.06
  In Stock
Push-To-Start Switch – Part Number: WP3977456
Push-To-Start Switch
★★★★★
★★★★★
(18)
PartSelect #: PS11742178
Manufacturer #: WP3977456
This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is...
$18.38
  In Stock
Door Switch Assembly – Part Number: WP3406105
Door Switch Assembly
★★★★★
★★★★★
(39)
PartSelect #: PS11741700
Manufacturer #: WP3406105
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
$19.38
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
  In Stock
Lint Trap Housing Seal – Part Number: WP339956
Lint Trap Housing Seal
★★★★★
★★★★★
(8)
PartSelect #: PS11741506
Manufacturer #: WP339956
This is foam seal for your dryer. It forms a seal to prevent air from escaping the rear of the dryer drum and the lint duct. This model comes with adhesive backing and is located in between the lint c...
$9.76
  In Stock
Cycling Thermostat - Limit 135/155 – Part Number: WP694674
Cycling Thermostat - Limit 135/155
★★★★★
★★★★★
(8)
PartSelect #: PS11743793
Manufacturer #: WP694674
Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 de...
$57.32
  In Stock
Door Catch – Part Number: WP3389441
Door Catch
★★★★★
★★★★★
(3)
PartSelect #: PS11741434
Manufacturer #: WP3389441
This white female door catch is attached to the dryer door.
$9.76
  In Stock

Questions And Answers for 11084722400

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brenda
January 16, 2023
Need wheels for the electric portable dryer to move around
For model number 11084722400
PartSelect logo
Hello Brenda, thank you for your question. The Caters are sold individually on part PS334146. Good Luck and have a great day.

Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 11084722400

[Viewing 9 of 9]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing
Show All
Door Pops Open
Fixed by
these parts
Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door Catch part had fallen out,/ was missing
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
Parts Used:
Door Catch Kit
  • Terri from Saint Augustine, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
672 of 730 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would stay on after opening the Door. The switch that turns off the dryer when you open the door was not broken.
You open up the lint filter access door and remove the two small screws that hold it to the top of the dryer. Once they are removed, you insert a flat blade screwdriver under front-top of the unit and the top will pop off. Exerting a little pressure towards you will help lift to top off the mounts. There are no other screws to remove.
The new switch comes attached to a clip. You just pull off the old clip and replace it with the new one and discard the old switch.
Parts Used:
Door Switch Assembly
  • John from Bethesda, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
173 of 181 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wouldn't latch.
I can't believe I waited so long to find this part and do this. I got the package very fast, opened it, took the piece to my dryer and popped it into place with my fingers. It worked perfectly! this took all of two minutes and saved me from having to hold the dryer door closed with a stick. Thank you, thank you!!!
Parts Used:
Door Catch Kit
  • Melody from North Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
202 of 282 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!