This switch or push to start switch is used for dryers. It is the tool that completes the circuit and ultimately starts the dryer by pressing and releasing the button after selecting a setting on the ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amanda
October 24, 2022
Which part is the timer/heater?
My dryers timer doesn’t advance and the dryer doesn’t heat
For model number 11065202311
Hello Amanda, thank you for contacting us. According to our research, the issue is probably with the timer, part number PS11749831. It controls the electrical components and the duration of the dryer cycles. A faulty timer can cause the symptoms that you mentioned. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Unplug from the wall ,remove upper back panel ( watch out for the grounding wire screwed to the panel), pulled off front knob, then twist and pull the switch out. Unplug the burned out switch, plugged in the new one. Re-assembled what I took apart, plugged her up and dried the load that was in the washer. Note: if yours is burned out due
... Read more to house power surge make sure the timer is working after you replace the switch, you might need one of thoes too.
After the new filter arrived, I took the old filter out, put the newe one in. No tools, no difficulty at all. Actually, the really difficult part of this entire episode was finding the model number on the dryer. It was on the underside of the door.
