Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11062066100 > Parts

11062066100 Kenmore Dryer - Parts

All parts for the Kenmore Dryer 11062066100

Below is a list of all parts for the Kenmore Dryer 11062066100. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 11062066100
15-28 of 135
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$31.40

Dryer Drum Seal with Adhesive

This drum seal with a silicone rubber adhesive is used in dryers. This part seals the drum to make sure air does not escape from the dryer. If your dryer is making loud noises, is ...

$19.19

Lid Switch

This 3 prong lid switch is used for washing machines that do not have a tub light.

$33.50

High Limit Thermostat

With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to...

$2.96

Cover Screw

Sold individually.

$6.16

Screw, 10-16 x 1

This screw is sold individually.

$36.79

Wheel, Blower

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over time. But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you probably need to replace it.

$28.02

Drum Support Shaft - Left Hand Threads

This shaft is for the front with left hand thread. Sold individually.

$2.96

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$36.78

Motor Pulley

$27.32

GRILL-OUT

This is an out grill for your dryer. The grill covers your lint housing to ensure no clothes get into the lint duct. It is white in color with a grill pattern, and about 17 inches wide. It is held in place by 4 screws, order the screws separately if necessary. You will need to replace this if your existing out grill is broken and allowing clothes to enter into the lint housing.

$4.63

Single Access Panel Spring Retainer/Clip

Sold Individually.

$4.79

Washer, Support

This part is located on the drum roller support shaft in your dryer appliance. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They are installed alongside the drum support rollers and idler pulleys. If you notice that your dryer is making an unusual sound it could be due to the washer becoming loose on the drum support. They help prevent the rollers and pulleys from bumping up against the brackets they are installed on. If you are replacing the rollers, we suggest you replace the washers at the same time.

$2.96

Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16

$149.03

Drive Motor with Threaded Shaft - 120V 60Hz

The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.

All Parts for the 11062066100
15-28 of 135