All Installation Instructions for Kenmore Washer 11026002010

wash machine walked

watch utube instruction.easy repair

Parts Used:

Washing Machine Suspension Rod Kit

Elzoria from FROSTPROOF, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Wouldn’t drain pump made loud noise

Removed old drain pump and found a sock in the inlet - must have burned out pump because after removing it pump was still defective. Installed new pump in about 30 minutes and off to the races no more issues

Parts Used:

Drain Pump - 120V 60Hz

REED from BUCHANAN, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable)

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replaced drain hose that was missing

slipped the new drain hose on and with locking plyers slipped the wire clap in place after three trys

Parts Used:

Washer Drain Hose

Delmar from EAST TROY, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

11 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Both outside door handles turned very beige

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you

Parts Used:

Spray Paint - 12 oz. - White

Howard from Boynton Beach, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

22 of 50 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

lid would not lock, washer would not run...

Removed old striker ( 2 Phillips head screws ) replaced with new striker with the 2 screws and was done, easy fix...

Parts Used:

Lid Latch Strike

John from Hale Center, Texas, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

washer wasn't spinning after rinsing but the motor was running

I had taken the time to watch videos of this repair so when the switch arrived I knew what I had to do. Removing the screws to get the back cover off was simple as was installing the switch. No tricks here just watch the videos and your all set to do the job

Parts Used:

Drive Belt

Terry from HANCOCK, MD
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I followed the video guide, which was excellent

I followed the instructions, however I did not have a spot to hold the bar temporarily, so I drilled a hole in the corner frame to hook them in at the front of the machine. All else was easy and according to the video.

Machine works great now.

Parts Used:

Washing Machine Suspension Rod Kit

Richard from NAPLES, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

7 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Making loud noises.

The video you sent me was very helpful told me the exact tools I needed and how to do it.
Thank you

Parts Used:

Washer Drive Pulley

Roy from BROOKLYN, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lid lock/latch stuck closed

Watched a video

Parts Used:

Lid Latch Assembly

David from BELMONT, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Shaking extreme

Per instruction sent with purchase

Parts Used:

Washing Machine Suspension Rod Kit

Barbara from RICHMOND, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

washer wasn't spinning on final spin

First I found and reviewed videos on line to do the repair for my machine and when I actually did it the videos made it simple to do. Always look for videos of the installation for your machine or appliance and the job will go easy

Parts Used:

Lid Latch Assembly

Terry from HANCOCK, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Rock and roll on spin

Replaced the suspension rods.
Must be done on its side as the rods only pull down. There is no slot.

Parts Used:

SUSPENSION

Bruce from LANDENBERG, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The main knob insert snapped.

Nothing to it. Just remember to put the insert in the knob, NOT on the selector stem. Line up the flat part of the insert with the flat part of the stem and push the knob in place.

Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob.

Parts Used: