Models > 11025066500 > Instructions

11025066500 Kenmore Washer - Instructions

All Instructions for the 11025066500
16 - 30 of 31
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the rubber lid seal had torn and was falling off of the lid.
I removed the torn part which just pulled off of the lid and snapped in the new piece. No tools were needed. I also wanted to add that it was great doing business with Part Select. The part came well packaged, it came in a timely manner, and it was the correct part ! I will try Part Select for any of my future repair part needs.
Thank you
Parts Used:
Lid Seal
  • VICKIE from MEQUON, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid seal was torn
Pulled off the old torn seal & in about 15 seconds had the new one put on, couldn't have been easier.
Parts Used:
Lid Seal
  • Debra from Ridgway, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic piece had split
Very easy --just put it onto the metal and it slipped right on.
Parts Used:
Lid Seal
  • Lana from Atlantic Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wow!
I received the order quickly (although thought it could have been packaged in a much smaller box) and it took less than 10 mins to remove the old seal and replace with the new one. Only problem is the seal I ordered wasnt causing the problem ..lol so will be ordering again!!! Thank you!
Parts Used:
Lid Seal
  • Sheila from Borger, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rubber lid cushioning strip broke
the original piece had 3 metal clips that held the strip in place. It was a matter of sliding the strip off and sliding the new replacement part on. Time involved was less than one minute. It took longer to find the part than to install it. The part was ordered Thursday night and it was installed by Monday! Great service!
Parts Used:
Lid Seal
  • Bruce from Hammett, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer lid seal was torn and because, I think, I was getting a moldy/musty smell from the washer and in the clothes.
It was simple slide off the old seal and then clip on the new one. I also want to thank the workers at Parts Select, it was very simple and everything went great. I will be using them again and passing the word on.
Parts Used:
Lid Seal
  • Erik from Atkinson, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lid gasket became older and brittle and eventually broke and cracked
Ordered the part and a couple of days later I popped off the old and popped on the new. It took longer to remove the part from the box than to install it.
Parts Used:
Lid Seal
  • kenneth from oregon city, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original seal on had deteriorated and was coming apart.
Really nothing to it, especially since the original seal was coming apart. I just ripped it the rest of the way apart and removed it, then slid the new one on in its place.
Parts Used:
Lid Seal
  • Sandra from Hamilton, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door seal worn out
When the part arrived I was busy, so my wife opened it and replaced the part.

Note: Parts Select is unbelievably quick. I ordered the part on Saturday night, selected the cheapest shipping method, and received the part on Tuesday.
Parts Used:
Lid Seal
  • MILTON from SARASOTA, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber seal on the lid worn out
Old seal just kept falling off due to age wear. Took old one off (kept falling off) and popped the new one right in place. Very easy. Thanks Parts Select
Parts Used:
Lid Seal
  • Synthya from Temecula, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The old lid seal was breaking down
No problem - I've done this before. Pull the old one out (or wait for it to fall out) and pop the new one in. Very easy.
Parts Used:
Lid Seal
  • Sandra from Hamilton, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Lid Seal Was Cracked
So Easy! Just slid old one off and sled new one on. This is the rubber seal that you touch when you open the lid. I was afraid I would get the wrong part but am so glad others left notes so I could tell this was the right one. And it definitely is worth the replacement cost.
Parts Used:
Lid Seal
  • Alice from Ashland, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
cracked lid seal
Pulled off old seal. Snapped on new seal. Takes longer to type it than it did to do it.
Parts Used:
Lid Seal
  • John from Rockford, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Lid seal was old and cracked
So easy it's ridiculous, take the old one off, put the new one on! Can't say I love doing laundry, but I love my new washer lid seal! :)
Parts Used:
Lid Seal
  • Dorothy from Washington, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old seal split
Seal on the lid split. New seal easily replaced. It just snapped into place.
Parts Used:
Lid Seal
  • Gary from DuBois, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 11025066500
16 - 30 of 31
Back to Top