Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11024642300 > Parts

11024642300 Kenmore Washer - Parts

All parts for the Kenmore Washer 11024642300

Below is a list of all parts for the Kenmore Washer 11024642300. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 11024642300
15-28 of 176
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.81

Foot, Front - Single

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a ru...

$16.30

Suspension Pads - Package of 3

$18.64

Drain Hose

It connects from the pump to the back panel. The clamp is not included.

$2.96

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

$2.96

Cover Screw

Sold individually.

$4.27

Retainer, Suspension Spring

$15.99

Tub-to-Pump Hose Kit

This kit comes with the clamps.

$4.37

Pump Retainer

Sold Individually.

$9.76

INLET HOSE

This hose can handle hot or cold water and is five feet long.

$2.96

Lid Hinge Mounting Screw

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

$5.59

Washer

This part goes on the agitator retaining bolt.

$9.28

Water Inlet Hose

$12.10

Drive Block - 2 5/16" High

This part is for large capacity belt drive and direct drive appliances.

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

All Parts for the 11024642300
15-28 of 176