110.796228 Kenmore Dryer Parts & Repair Help | PartSelect
Models > 110.796228

Models starting with 110.796228

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(244)
PartSelect #:PS11741460
Manufacturer #:WP3392519
This thermal fuse is used in dryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 in...
$10.27
In Stock
(224)
PartSelect #:PS346995
Manufacturer #:341241
This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The belt attaches to the drum, idler pulley, and motor pulley. As the armature of the moto...
$16.54
In Stock
(63)
PartSelect #:PS11741405
Manufacturer #:WP3387134
A cycling thermostat is in tune with the temperature of your dryer and regulates it in order to maintain a certain temperature. This thermostat reaches a temperature of 155 degrees...
$15.04
In Stock
(76)
PartSelect #:PS334310
Manufacturer #:279834
This is an M series new style coil kit, used in gas dryers. When the igniter reaches a high enough temperature, these coils work together to let the gas enter the dryer. The coils ...
$15.07
In Stock
(209)
PartSelect #:PS11741701
Manufacturer #:WP3406107
A door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open. This part may need to be replaced if you find that the dryer is not...
$20.47
In Stock
(64)
PartSelect #:PS334230
Manufacturer #:279570
This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch. These two parts work together to keep your dryer do...
$5.04
In Stock
(52)
PartSelect #:PS347627
Manufacturer #:349241T
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining was...
$9.60
In Stock
(17)
PartSelect #:PS334180
Manufacturer #:279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder k...
$40.20
In Stock
(13)
PartSelect #:PS11743765
Manufacturer #:WP691366
This part provides the tension required for a multi-ribbed belt. It also helps the belt rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumb...
$15.48
In Stock
(80)
PartSelect #:PS11757278
Manufacturer #:WPW10717210
This lint filter is a manufacturer-approved replacement part for your dryer. Replacing this part it easy, simply remove the old lint filter and slide the new one in place. Make sur...
$38.45
In Stock
Questions and Answers for 110.796228
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer was working, but no heat.

Dryer Thermal Fuse – Part Number: WP3392519
  • Customer: ANTHONY from CHESHIRE, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 2445 of 2740 people found this instruction helpful
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, ... read more

Dryer tub belt broke

  • Customer: Ray from Denton, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 1005 of 1068 people found this instruction helpful
Removed the two screws that attatch the lent channel to the top of the dryer, then lifted the top of the dryer by pushing in on the two locking tabs located at the front , left and right , corners of the dryer top with a small flat head screw driver. The top of the dryer will fold back out of the way. At this point I removed the two 1/4 inch screws that are ... read more

door switch was bad

Dryer Door Switch – Part Number: WP3406107
  • Customer: pat from lisbon,, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench set
  • 959 of 985 people found this instruction helpful
i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service read more