110.2086299 Kenmore Washer Parts and Repair Help
Models > 110.2086299

110.2086299 Kenmore Washer - Overview

Models starting with 110.2086299

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(209)
PartSelect #:PS388034
Manufacturer #:80040
Agitator directional cogs, otherwise known as dog ears, come in a package of four and are generally found in washers where the motor is connected directly to the washer. The agitat...
$2.92
In Stock
Order within the next 11 hrs and your part ships today!
(104)
PartSelect #:PS1485646
Manufacturer #:285753A
This direct drive motor coupling, also known as a coupling kit, is a newer version of the part and is used in your washer. The part includes 1 rubber coupling, 2 drive lugs, and ha...
$16.22
In Stock
Order within the next 11 hrs and your part ships today!
(134)
PartSelect #:PS334650
Manufacturer #:285811
The agitator is designed to spin the clothes during a wash cycle. If your washing machine will not agitate or spin, shakes, or is noisy, you may need to purchase the agitator repai...
$24.57
In Stock
Order within the next 11 hrs and your part ships today!
(68)
PartSelect #:PS11741239
Manufacturer #:WP3363394
This direct drive water pump, also known as the washing machine drain pump or washer drain pump, is manufactured for washing machines that do not have belts. This is a genuine Whir...
$39.06
In Stock
Order within the next 11 hrs and your part ships today!
(71)
PartSelect #:PS11722098
Manufacturer #:3949247V
This is a lid switch for a washing machine. This is a genuine OEM part. The pin on the lid pushes on the lever of the lid switch to tell the washing machine that the lid is closed,...
$45.40
On Order
(24)
PartSelect #:PS11743345
Manufacturer #:WP63907
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down, or has stretched out and lost i...
$3.40
In Stock
Order within the next 11 hrs and your part ships today!
(76)
PartSelect #:PS334646
Manufacturer #:285805
The water inlet valve on your washing machine is used to fill the tub with cold, warm, or hot water for the wash and rinse cycles. This part could have either a blue or green-color...
$28.42
In Stock
Order within the next 11 hrs and your part ships today!
(49)
PartSelect #:PS334641
Manufacturer #:285785
A clutch assembly is responsible for spinning the basket during the spin cycle in your washing machine. A worn-down clutch can lead to a slower spin which can lead to the machine n...
$32.22
In Stock
Order within the next 11 hrs and your part ships today!
(58)
PartSelect #:PS11742021
Manufacturer #:WP3949238
This part comes with a three-wire lead. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
$44.80
In Stock
Order within the next 11 hrs and your part ships today!
(5)
PartSelect #:PS334562
Manufacturer #:285587
This is a genuine OEM thrust spacer for your washer, and is also commonly known as a retainer ring. The spacer is about 2.5 inches in diameter, is made of plastic, and is white in ...
$3.80
In Stock
Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Washer stopped mid cycle

Lid Switch – Part Number: 3949247V
  • Customer: Travis from Pearland, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 1000 of 1024 people found this instruction helpful
1. Unplug washer.
2. Remove screws at control panel end caps.
3. Flip control panel back to expose wiring.
4. Detach lid switch wiring harness from control panel.
5. Use screwdriver to pry the 2 brass clips holding the back panel of the washer to the front and sides piece.
6. Tilt the front/sides piece over to expose lid switch.
read more

No movement from Basket & agitator

  • Customer: Jeff from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 1007 of 1068 people found this instruction helpful
The job looked intimidating but turned out to be very easy.
First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pump.
The motor co... read more

washer wouldn't agitate

  • Customer: mike from Kent, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 811 of 857 people found this instruction helpful
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing usin... read more