Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 10644253401 > Instructions

10644253401 Kenmore Refrigerator - Instructions

All installation instructions for 10644253401 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 10644253401
361-375 of 706
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The edges of the plastic crisper pan were breaking off.

  • Customer: Joy from Fenton, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The Crisper Pan ordered through PartSelect was a perfect replacement. The item ordered arrived quicker than expected. I'm very pleased with your service.

Broke the arm off the food compartment rocker switch

  • Customer: David from St. Pete Beach, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After receiving the new part almost immediately,using two screw drivers, removed the broken switch from the plastic frame. Be careful not to scratch or otherwise tear the plastic...very pliable. Since the original switch was factory installed and the wires were packed in fiberglass insulation, the switch came out but the wires and clips were still in place and could not reach the new switch. It was necessary to pull them down with bent long nose pliers...used a lot of "pull" but the wires held up.Connected the switch, turned the power on and there was light! Reports from other users really took the uncertainty out of the task.

Broken Glass shelf

  • Customer: Chuck from San Marcos, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered new glass shelf installed it.

Crisper Drawer Was Broken

  • Customer: Christopher from Parish, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took the part out of the package and installed it. The service I received was excelent. Got the part two days after ordering it

popping sound when door opened beyond 90 degrees

  • Customer: John from Westlake Village, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I would never attempt an appliance repair but after watching the video instructions for installing this part I decided to give it a try even though I'm dangerous with a screwdriver. After retrieving a nutdriver from my $39 handy dandy tool set, it was a piece of cake. Upper hinge cover, hinge, door removal, comes off in a matter of minutes. Only problem surfaced when I went to install my new cam in the lower hinge. It didn't fit. It was actually for the upper door hinge. I reinstalled the lower plastic piece (whatever it's called), tightened it down, put the door back on (you can do it yourself if it's the refrig. side) and popping sound was gone. I guess the bottom hinge plastic piece was probably loose but you can't tighten it unless you remove the door. I now have a upper door cam in my drawer ready when it fails and will replace it without hesitation.

Noisey Evaporator Fan Motor

  • Customer: Les from Pine Beach, NJ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
removed freezer shelves, removed back panel with screw driver. removed wires from fan motor, removed fan motor from mounting bracket, removed fan from motor. installed new motor in mounting bracket, installed fan on new motor,installed wiring on new motor. turned power on to check operation, installed rear panel and shelves. total time for job about a half hour

Crack on front of crisper pan

  • Customer: Kristine from Fort Worth, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I cracked the crisper pan after having the refrigerator only one week and needed a replacement ASAP!! I was so happy to find this site and the part I needed. It's a little pricy for a plastic drawer but I can overlook that since it was in stock and I received it the very next day!!!I took out the cracked pan, slid in the new one and I was done!!!! No more unsightly crack!

Broken Parts

  • Customer: NADIA from GARNER, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My humidity control and veggie drawers were cracked and broken, I had shopped around but the price to replace them was too high and not in my budget. I came up on partselect.com while searching to find a more reasonable price. The price, service, delivery and customer service was outstanding. One of the drawer had been damaged during shipping, I called them and they sent another one free of charge right away. I had a very positive experience and I have added them to my favorite web sites.

refrigerator runs great for 4or5 days then shts down youcan turn the thermostst down and back up or unplug it for a few seconds and it starts up again most of the time.

  • Customer: Darrell from Smithfield, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I replaced the relay started right up did fine for about 4 days. Came home from work I had lost everything in the freezer again.turned down the thermostat and back up and it started right up. 5 days later same thing again.

Compressor would not work

  • Customer: James from Lucas, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I spoke with a friend of mine who does refrigeration and he suggested that I check the starter. I pulled it out and read your site to confirm the problem. The starter had loose particles just as your site mentioned. I ordered the part on Wed. afternoon and received it the next morning. When it came I received two different pieces which allowed for a product upgrade if needed. It wasn't and after I put it in it worked great. Freezer to -20 degrees F. Thanks...JT from Lucas, Ohio.

None

  • Customer: William from Harvest, AL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Order at 2:30 PM on Tuesday and had it by 1:30PM Wednesday. Less than a day on the delivery order. Thanks!

freezer was freezeing up

  • Customer: phillip from palmyra, VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
unplug freg.took everything out.pulled out shelves and pulled out back panel.their was my part i had to replace.

Door not staying closed

  • Customer: Josh from Snohomish, WA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Took the bolts at the bottom of the door off and removed the door. Pried out the old cam and put the new one in. Put the door back on and it works like it is brand new. The fridge is 13+ years old

Needed extra shelf on refrigerator door

  • Customer: Virginia from Naperville, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
We wanted an additonal shelf on the door of our 10 year old refrigerator. I called because I wasn't sure what to order. The saleswoman was very helpful and friendly and my order was placed quickly. It arrived in just a few days and was easy to place on the door. It is now in my refrig holding lots of little jars and bottles. Thanks PartSelect! We wonder why it took us so long to think to order this!

Refrigerator and freezer both stopped cooling

  • Customer: Patrick from Green Valley, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I read prior postings about how the compressor start relay was the most likely failed part based upon the periodic clicking as well as the rattle when the relay was shaken, with loose metal particles coming out of the original part. I ordered the replacement for next business day delivery and it arrived on schedule. The replacement kit comes with two relays for two different compressor designs. The correct relay is an exact replacement for the original, with the same part numbering. I removed the compressor start capacitor (a small black rectangular box with two metal terminals) from the original relay and installed it on the new part. The replacement kit comes with a black plastic cover, which did not fit since the start capacitor is in the way. I reinstalled the wire hook that secures the relay to the compressor body, and the refrigerator now works great.
All Instructions for the 10644253401
361-375 of 706