Models > 10644029600 > Instructions

10644029600 Kenmore Refrigerator - Instructions

All Instructions for the 10644029600
901 - 915 of 1127
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice maker not making ice.
Followed instructions posted on your site. It was straight forward and very simple to complete.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Tracey from Louisville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker sopped producing ice
Initial diagnosis incorrectly led me believe the problem was with the optic eye. After replacing the optic eve and still no ice, I realized the problem had to be with the actual ice maker itself. The removal of the old ice maker and installing of the new one took less than 5 minutes. This of course was after watching the repair video first. I still feel that I saved money by doing the repair myself instead calling in a appliance repair man, even with the added cost of the probable unneeded optic eye replacement. I am very satisfied.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Steven from ORLAND PARK, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit working
The ice maker quit working about 4 years after we purchased this refrigerator. I asked several contractors if they knew what the problem could be. All believed it had something to do with the water line being stopped up. However, when I looked at the water line, it seemed fine. Thankfully when I googled about repairing this refrig, I came upon this website. It stated statistically that the Icemaker assembly part was the problem. Guess what? Replaced it and it works! The repair was a little tedious, so I got my next door neighbor to help. He has a few moments struggling getting it out and the new one in, but overall, it was not too difficult. I believe I could have done it with the video's help but certainly would have taken me longer.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Melanie from Murray, KY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Broken shelf in refrigerator.
I was cleaning my refrigerator. When the glass shelf was being cleaned it barely bumped the bottom of the sink. There was no water in the sink. The shelf exploded into thousands of small pieces simular to a car windshield. I was devastated! I went online and ordered a replacement that same day. The next morning I was on my front porch watering plants when a delivery truck pulled into my driveway. It was the replacement shelf. I cannot believe the fast service. Thank you.
Parts Used:
Refrigerator Shelf Glass
  • Mary from Adrian, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replaced ice maker
i followed instructions on video it went real simple except for the small area to work in.
Parts Used:
Ice Maker Assembly - 8 Cube
  • V.C. from Baytown, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice Maker stopped making ice.
I called a repairman, who removed the ice maker and reinstalled it, not once -but- three different times and charged me $84.60. (That's all he did.) I remembered, PartSelect, watched video, ordered motor, received in three days, installed in less than fifteen minutes. Within ten minuted water was running in and later ice was dropping into bin, next day bin was full. Wish I had trusted myself and looked up my fridge problem on PartSelect before calling that (repair) man, and saved myself $84.60. By the way, I'm a 67 year old female.
Parts Used:
Icemaker Control Assembly
  • Lucy B from Beckley, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker was not making ice.
I'm sorry I can't help you with this, as one of my sons diagnosed the problem and did the repair for me. It took him maybe five minutes to swap the parts, and the ice maker has been working fine ever since.
Parts Used:
Icemaker Control Assembly
  • Carl from Tampa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
ice maker door failed to close causing frost to form preventing proper operation of icemaker.
Found video on YouTube. Ordered part from partselect. Part arrived and viewed video to refresh memory. Our refrig was a little newer than the video but the process ww was the same and quite simple after viewing the video.
Parts Used:
Ice Door Kit
  • Melinda from Owasso, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit working, then the fridge & freezer stopped cooling
I actually purchased an ice maker, a combination start device & a run capacitor. I watched the 2 videos which were very helpful, in fact I may not have been able to do this if I had not watched the videos first. It took me step by step. It couldn't have been more simple. I replaced the start device & the run capacitor first just to make sure my fridge would cool again, then when it did, I replaced the ice maker. I saved myself a service call ($59.95) and the labor to replace the ice maker & other parts($140)and that didn't include the parts! By the way I'm female and 71 years old. So if I can do this anyone can.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Ina from Altamonte Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Needed a new shelf for extra storage
Ordering through this site was extremely easy. They sent the right part and I received it very fast. I'm very impressed.
Parts Used:
Cantilever Shelf - Glass Included
  • Beth from Olmsted Falls, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice machine stopped making ice
Open freezer door and close flap on the left being sure not to block the infrared beam. If red light goes solid in a few seconds the Emitter receive and xmit boards are good. Unplugged fridge, Took the ice machine out took off the motor/controller cover and jumpered the two test points together with a short length of insulated wire. place the ice maker back on bracket to free up my hands and plugge in the fridge, turned ice maker on. Closed the flap and ensured red light was on solid and I was not blocking the beam... the motor control wheel did not turn slowly/cycle as it should have with the jumper inserted... Motor/controller assembly was bad. Pulled out icemaker and noticed some corrosion in the ice tray so ordered the entire ice maker instead of just the motor/control assembly... cost only about $30 more. New ice maker arrived and I installed, took about 10 hours before it got cold enough and began making ice.
Parts Used:
CNTRL-ELEC
  • Randy from Belleville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Installation of Replacement Ice Maker
Watched the video accompanying the ice maker replacement part. Took 6 minutes. Then, having gathered my two recommended tools, moved to the fridge. Had the new replacement installed and working in 4 minutes. Doesn't qet any better than this.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Robert from Fernandina Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Freezer temperature too cold
Temperature in freezer too cold. Temperature display showed higher temperature than actual which caused the freezer to continually run. Thermister is found behind a white box on wall in freezer. Unscrew the box from wall and easily disconnect the thermistor clamp. Replace in reverse order.
Parts Used:
Thermistor
  • Robert from Boynton Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
My ice maker quit working
I have some electronics background but your listed problems helped me narrow down the problem. I ordered the part, removed old part, installed new part (maybe 15 minutes total) and my icemaker started dumping the ice that was in the tray within 20 minutes and making more. That clunking sound of ice was music to me ears and wallet!! Thanks!!
Parts Used:
Icemaker Control Assembly
  • pauline from somerville, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker wasn't getting water
I called a repair man out to see what the problem was because my husband just died and I didn't want to pay such high prices for a repair. He told me I needed a new motor for the ice maker and it would be a total of about 305.00. I couldn't believe the price. It cost me 59.99 for his diagnosis. I went to your web site and found the part and watched you installation video. I am 65 years old and I was able to install the new part in less than 15 min. The part was about 95.00. I saved 150.00 by doing it myself. I will always look on line before I have a repair man do a job. I may need them to diagnose the problem, but I will try myself before paying such outrageous fees.
Parts Used:
Icemaker Control Assembly
  • Anna from Morgan Hill, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10644029600
901 - 915 of 1127