Models > 10644022603 > Instructions

10644022603 Kenmore Refrigerator - Instructions

All Instructions for the 10644022603
586 - 600 of 731
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Thermostat was broken Flap was broken on the door and Sensor was broken off the ice mold on
Took The icemaker apart saw what parts needed to be replaced ordered them online put it back together Found the person I dealt with on the phone to be very knowledgeable very happy with the company Now the ice is flowing
Parts Used:
Ice Mold Cycling thermostat Flipper
  • William A from Coral Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker leaked water into the freezer
Followed the instructions in the PartSelect video. It was so easy. Replaced the old ice maker on Monday. Visited a friend on Tuesday. Her Kenmore Frig's ice maker was broken, would not make ice. I told her how easy it was to fix and ordered the part for her today. It should be here by Tuesday and I will install it as soon as it comes in.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Gary from New Port Richey, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker dump tray was broken
removed ice maker took motor assembly off the end of ice maker, and installed the new part. this was pretty easy because I have taken it apart before. But this is not a hard job for a novice.
Parts Used:
Stripper Arm Kit
  • Donald from White Lake, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Plastic Water Filter Cap was broken when I replaced a water fileter earlier
Very easy - simply turn on the new cap.
Parts Used:
Cap, Water Filter (White)
  • John from Katy, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working, bad control unit
The replacement ice maker water inlet was taller than the original. I had to disassemble both the new and old unit to replace the new water inlet with the old one. The video was very helpful in troubleshooting, removing and installing the unit.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Chuck from Kansas City, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker failed to make ice
Watcheda U-Tube type video of how to repair the unit. This was very helpful in that it identified a screw that had to be removed but was not visible upon my initial observations. Also it mentioned that you had to re-use some of the original hardware in order to complete the replacement. My only complaint is that I believe the failed motor could have been replaced for about $15 but I was not able to find that specific part in any catalog and opted to replace the entire unit. Overall I am extremely well pleased. Everything now works fine.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Joseph from Canandaigua, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
ice maker broken
Followed the video. only problem old ice maker was frozen in place. Had to thaw out in order to slide old ice maker out of slot. other then that, new one is working fine.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Jean from Destrehan, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker stopped making ice
research of company website showed parts to buy (per percentage of failure) and how to install those parts I viewed video on installation of parts and did the job, it was a snap
Parts Used:
CNTRL-ELEC
  • Ronald from Hebron, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker stopped making ice
Web site is fantastic, I used web site to figure out my problem and order parts, I also used web site on how to install which made it a snap to do repair Ice maker up and running, all replacements parts were factory which fit perfectly
Parts Used:
Ice Maker Assembly - 8 Cube
  • Ronald from Hebron, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
icemaker inop would not harvest
easy,remove old parts installed new parts,icemaker started working properly.
Parts Used:
CNTRL-ELEC
  • howard from bruceton mills, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making ice.
Followed instructions posted on your site. It was straight forward and very simple to complete.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Tracey from Louisville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker sopped producing ice
Initial diagnosis incorrectly led me believe the problem was with the optic eye. After replacing the optic eve and still no ice, I realized the problem had to be with the actual ice maker itself. The removal of the old ice maker and installing of the new one took less than 5 minutes. This of course was after watching the repair video first. I still feel that I saved money by doing the repair myself instead calling in a appliance repair man, even with the added cost of the probable unneeded optic eye replacement. I am very satisfied.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Steven from ORLAND PARK, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit working
The ice maker quit working about 4 years after we purchased this refrigerator. I asked several contractors if they knew what the problem could be. All believed it had something to do with the water line being stopped up. However, when I looked at the water line, it seemed fine. Thankfully when I googled about repairing this refrig, I came upon this website. It stated statistically that the Icemaker assembly part was the problem. Guess what? Replaced it and it works! The repair was a little tedious, so I got my next door neighbor to help. He has a few moments struggling getting it out and the new one in, but overall, it was not too difficult. I believe I could have done it with the video's help but certainly would have taken me longer.
Parts Used:
Ice Maker Assembly - 8 Cube
  • Melanie from Murray, KY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Broken shelf in refrigerator.
I was cleaning my refrigerator. When the glass shelf was being cleaned it barely bumped the bottom of the sink. There was no water in the sink. The shelf exploded into thousands of small pieces simular to a car windshield. I was devastated! I went online and ordered a replacement that same day. The next morning I was on my front porch watering plants when a delivery truck pulled into my driveway. It was the replacement shelf. I cannot believe the fast service. Thank you.
Parts Used:
Refrigerator Shelf Glass
  • Mary from Adrian, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replaced ice maker
i followed instructions on video it went real simple except for the small area to work in.
Parts Used:
Ice Maker Assembly - 8 Cube
  • V.C. from Baytown, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10644022603
586 - 600 of 731