10641563801 Kenmore Refrigerator - Instructions

ordered part. received part. slid part into position. DONE!

Unplug appliance. Socket wrench to unscrew two screws. Module drops down. disconnected two press-on wires by prying off with screwdriver. Removed old switch. Press-fit new switch. Reconnected two wires (color coded). Screwed module back in place. Plug in appliance.

Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place

We dealt with this problem for well over six months. Last week while visiting our home my mother tried to schedule a repair man to come out. Upon hearing this conversation i urged her to hang up the phone and let me fix it. This prompted me to go on line and find the three dollar part needed to fix it. With the help of a friend to lift and hold the door i unbolted the black closer piece and replaced it with the new one. This whole process took less than 10 minutes and completely fixed the problem. The service visit would have cost upwards of $80.00 so this was well worth the two days shipping i paid for.

All food and drawers were removed from the freezer, including ice tray. The left side shelf brackets were removed to ease removal of the back panels which expose the the bi-metal defrost thermostat. Six screws to remove the large back panel, plus the shelf support rails needed to be loosened to remove the smaller upper panel. The bi-metal thermostat is mechanically clipped to the upmost coil of the condenser. The two wires must be cut and wires for the new thermostat spliced in. The wires were tinned with solder to insure a good connection, then twisted and crimped with an automotive end connector. With the smaller 22. 8 Cu. Ft. Refrigerator a lot of the work will have to be performed with one hand. The hardest problem here is diagnosing the malfunction correctly in the beginning. I was impressed that the replacement part was received in two days . . .

Simply slid the broken pan out, and slid the new pan in. Completely painless. Part arrived at warp speed. Very happy with the order.

removed damaged crisper pan by sliding out of refridgerater and replaced with new crisper pan.
I was most impressed with the delivery! I order the crisper pan before noon on one day, and received the crisper pan the very next morning via fed - ex.

Replaced both since they came as a set. The only way it could have been any easier is if I had the wife do it. She had the remote this time. (•¿•)

Part came the very next day after I placed the order, simply removed broken Crisper Pan and replaced with new pan.

Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.

Removed the old parts, put in the new ones. Parts Select is wonderful, ordered my parts & they were delivered within 2 days!!! Thanks

one, two, three, done

Ordered the the part for a great price and slid it right in to the slots that are on the fridge.

Had my info.
Looked up part & found on sight in stock.
Ordered in less than 2 minutes.
Shipped that day.
Recieved by wife next day.
Came home from work wife HAPPY.
Any question why I used PartSelect (see above)

unplug refrigerator....remove all shelf rails and studs...unscrew rear panel....unplug and removed motor...it's held in with a plastic retainer....reassemble