Models > 072-6116-072-071

072-6116-072-071 ((1986)) MTD Lawn Mower - Overview

Sections of the 072-6116-072-071

[Viewing 1 of 1]
Parts Diagram and Parts List for (1986) MTD Lawn Mower
Parts
Keep searches simple, eg. "belt" or "pump".
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
  In Stock
Hex L-Nut 5/16-18 Thd. – Part Number: 912-0429
Hex L-Nut 5/16-18 Thd.
PartSelect #: PS9164534
Manufacturer #: 912-0429
$3.08
  Special Order
Lower Handle – Part Number: 749-0928A-0637
Lower Handle
PartSelect #: PS9303048
Manufacturer #: 749-0928A-0637
$37.47
  In Stock
TT Sems Screw 3/8-16 X 1.0" – Part Number: 710-0654A
TT Sems Screw 3/8-16 X 1.0"
PartSelect #: PS9100242
Manufacturer #: 710-0654A
$4.99
  In Stock
Discharge Chute – Part Number: 931-1034B
Discharge Chute
PartSelect #: PS9310891
Manufacturer #: 931-1034B
$69.78
  In Stock
Screw, #8-18, 0.500 – Part Number: 710-0227
Screw, #8-18, 0.500
★★★★★
★★★★★
(1)
PartSelect #: PS9085761
Manufacturer #: 710-0227
$4.99
  In Stock
Hex Bolt 5/16-24 X 1.00" Lg. – Part Number: 710-0888
Hex Bolt 5/16-24 X 1.00" Lg.
PartSelect #: PS9088315
Manufacturer #: 710-0888
$4.99
  In Stock
Rear Axle Bolt – Part Number: 738-0213
Rear Axle Bolt
PartSelect #: PS9110254
Manufacturer #: 738-0213
$7.90
  Special Order
Push Nut 1/4" – Part Number: 926-0106
Push Nut 1/4"
PartSelect #: PS9171993
Manufacturer #: 926-0106
$4.11
  Special Order
Pivot Bar – Part Number: 15262B
Pivot Bar
PartSelect #: PS8870533
Manufacturer #: 15262B
$15.01
  In Stock
Nut, Push, 5/16 – Part Number: 726-0135
Nut, Push, 5/16
PartSelect #: PS9099319
Manufacturer #: 726-0135
$6.55
  In Stock
Wire Tie – Part Number: 725-0157
Wire Tie
PartSelect #: PS9100863
Manufacturer #: 725-0157
$3.99
  In Stock
View More
Back to Top

Questions And Answers for 072-6116-072-071

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top