Maytag Microwave Hardware
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Microwave Hardware
Your Price
$8.81
In Stock
Maytag Microwave Top Mounting Screw
PartSelect Number PS11744892
Manufacturer Part Number WP8169704
This screw is sold individually.
Installation Instructions
Michelle from Gilbert, AZ
Bought Used needed Top Mount Screws and Filters
Awesome! Everything fit and worked! Thanks!
Read more...
Your Price
$5.61
In Stock
Maytag Microwave Screw, 8/18 X 3/8
PartSelect Number PS11746840
Manufacturer Part Number WP90767
This screw is sold individually.
Installation Instructions
Alexander from Lakeland, FL
Broken Dryer Knob
First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wife informed me that the knob on the dryer had broken. So she was using the pliers to select the cycle. Somehow she knew where the missing pointer was actually pointing. Since the dryer was over 5 years old I saw this as an opportunity to upgrade both appliances. Not with my frugal wife. A search of the Internet popped up partselect. I ordered Wednesday morning and the parts where on my doorstep late Thursday. Trust me I was very surprised. Everything worked perfectly. Two thumbs up!!!
Read more...
Your Price
$5.61
In Stock
Maytag Microwave Screw
PartSelect Number PS11741605
Manufacturer Part Number WP3400832
This screw is sold individually.
Installation Instructions
Alan from PEARISBURG, VA
Broken front glass
Very easy. Take the two top screws out and the two bottom holders off. The bottom holders hold the glass up in place. Grab the handle and pull glass out. To install put handles screws back on the glass and slide in place. Once in place install the bottom holders pieces back on. *** I would buy screws because after years of use the head rust out and sometimes they are hard to get off... all in all very easy to install
Read more...
Your Price
$13.03
In Stock
Maytag Microwave Screw
First step was to determine whether the screws were metric or US standard - they are metric. The next step was to remove the top hinge in order to remove the door and replace the bottom cams and brackets. This took a couple of minutes, replacing the cams was about 5 minutes and putting the door back on the pivot and reattaching the top hinge was another couple of minutes.
If I had called a service tech they would have charged a minimum of two hour and for the parts. I estimate that I saved myself about $100. Read more...
PartSelect Number PS11742755
Manufacturer Part Number WP489483
This screw is sold individually.
Installation Instructions
Enrique from Tigard, OR
The refrigerator door was difficult to maintain closed
Because the lower cams are made out of hard plastic the repeated opening and closing of the door wore them out. The hardest part was taking all of the food that is normally stored in the door.First step was to determine whether the screws were metric or US standard - they are metric. The next step was to remove the top hinge in order to remove the door and replace the bottom cams and brackets. This took a couple of minutes, replacing the cams was about 5 minutes and putting the door back on the pivot and reattaching the top hinge was another couple of minutes.
If I had called a service tech they would have charged a minimum of two hour and for the parts. I estimate that I saved myself about $100. Read more...
Your Price
$11.10
On Order
Maytag Microwave Spacer
PartSelect Number PS392038
Manufacturer Part Number 8184109
Waterproof seal.
Fixes these symptoms
- Tray won’t turn
- See more...
Your Price
$7.93
In Stock
Maytag Microwave Screw
PartSelect Number PS11742539
Manufacturer Part Number WP4449154
Sold individually.
Installation Instructions
Dan from Madison, MS
Bake Unit not heating properly
Turned the power to the oven off. Took two crews out. Disconnected the old unit, connected the new unit, put the two screws back in and tested the unit.
Read more...
Your Price
$14.10
In Stock
Maytag Microwave Screw
PartSelect Number PS12728594
Manufacturer Part Number W11380570
Sold individually. For white and almond models.
Installation Instructions
MILES from ALAMOGORDO, NM
Microwave Door Exterior panel was cracked and the handle was broken
I disassembled the door by removing three screws from the side opposite the hinges and pried (lifted) that edge up and rotated the panel away from the metal portion of the door towards the hinges. I assembled the new door panel by attaching the handle (2 screws). I attached the new door panel by starting at the hinge side of the door and working towards the opposite end of the door. The last little bit was tough to get it to snap over the metal sub-door. I reinstalled the 3 screws to snug, not tight because I did not want to crack the plastic.
Read more...
Your Price
$20.71
In Stock
Maytag Microwave Screw
PartSelect Number PS12349731
Manufacturer Part Number W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Installation Instructions
Ronald from Northfield Center, OH
changing stove and dishwasher to match new frig.
I actually replaced parts on my black double stove to make it into stainless. We purchased a new frig and needed to replace parts on our stove and dishwasher so they would match. They look beautiful, all the parts shipped when they were suppose too. Ordering from this company was top notch. Would order again if needed.
Read more...
Your Price
$65.87
In Stock
Maytag Microwave Hardware Kit
PartSelect Number PS11730898
Manufacturer Part Number W10821385
This is a manufacturer-approved mounting kit for your microwave. This kit is crucial for keeping your microwave securely wall-mounted. This kit does not include the mounting plate itself. This kit comes in handy if you buy your microwave separately from the mounting kit.
Installation Instructions
rebecca from LA CANADA FLT, CA
Demo stove exhaust fan and tile backsplash, install over range microwave, rotate exhaust fan and adjust exhaust plenum.
Whirlpool Microwave was purchased as used item, so installation in a new location required purchase of mounting template, wall bracket, mounting hardware. Granite backsplash cut out using wet/dry diamond blade and Ryobi 6.5 inch saw. Microwave exhaust fan removed and rotated for upward exhaust using modified exhaust plenum from existing stove exhaust hood. Installation of Microwave was the simplest part of the job. All mounting materials worked as required. A list of the materials provided in the hardware mount kit would be helpful, I would not have had to order the top mount screws separately if it was clear that they were included in the kit. Otherwise, no complaints.
Read more...
Your Price
$7.73
In Stock
Maytag Microwave Screw
PartSelect Number PS11747542
Manufacturer Part Number WP98165
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
Installation Instructions
Lynn H from MILL CREEK, WA
Hinge pin for drawer lid broke
1. Remove all drawers {3}, shelves {glass 1}, shelf support {1}. 2. Remove two {2} screws from End Cap. 3. Carefully remove End Cap and drawer temperature control part on the back wall keeping them aligned as installed. The part on the back wall swings out so that the tab on the left end of the piece may be withdrawn from the securing slot (hole). The two parts should be carefully removed while keeping the two parts at a right angle the way they are installed. The reason for this caution follows. 4. On the back side of both parts are plastic pieces that, I believe, can be easily broken if you are not aware. The pieces are connected together at the right angle. They are the control arms for the temperature control -- on right side End Cap only -- the left side doesn't have them or the rear part on the back wall. 5. The pieces must be disconnected and removed. You must examine and ponder how they are held in place and hooked together in order to disconnect and remove them without damaging them. The same advice is applicable to reinstalling the pieces in the new part -- End Cap. 6. After reassembled and keeping the two parts at a right angle, insert the tab on the left end of the back wall part into the slot (hole) and swing the two parts back into position. 7. Replace the screws. 8. Done, reinstall the shelf, shelf support, and the drawers. NOTE: I ordered the two screws but they were not needed.
Read more...
Related Maytag Microwave Parts
- All Maytag Microwave parts
- Maytag Microwave Brackets and Flanges
- Maytag Microwave Electronics
- Maytag Microwave Filters
- Maytag Microwave Fuses
- Maytag Microwave Glass Tray and Supports
- Maytag Microwave Grilles and Kickplates
- Maytag Microwave Latches
- Maytag Microwave Lights and Bulbs
- Maytag Microwave Motors
- Maytag Microwave Racks
- Maytag Microwave Thermostats