Maytag Dishwasher Spray Arms | Replacement Parts & Accessories | PartSelect

Popular Maytag Dishwasher Spray Arms

Your Price
$6.82
Seal, Lower Sprayarm
PartSelect Number PS11741334
Manufacturer Part Number WP3376846
This dishwasher lower spray arm seal, or under spray arm bearing ring, is designed with the split by the manufacturer. It is not damaged or defective, and is sourced directly from the original manufacturer. This part is approximately 2 inches in diameter, made of plastic, and is white in color. This part is mounted underneath the dishwasher spray arm and creates a seal between the lower spray arm and the sump housing. To access the seal, remove lower dish rack and unscrew the nut that secures lower spray arm to the remove cover. No tools are required to replace the lower seal on your dishwasher.
Fixes these symptoms
Leaking
Noisy
Not cleaning dishes properly

See more...
Installation Instructions
James from Jacksonville, FL says,

Dishes not clean and lower wash arm wobbled.
Completely removed lower wash arm and replaced bearing ring and seal....read more

Your Price
$18.34
Spinner Kit
PartSelect Number PS972316
Manufacturer Part Number 8193983
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
paul from erie, CO says,

spinner kept falling off
i removed the top screw for the water input to the spinner, which gave me enough room to replace the worn nipple pin that the spinner snaps on to. then snapped the new spinner in place. and then screw...read more

Your Price
$5.28
Spray Arm Seal
PartSelect Number PS11745436
Manufacturer Part Number WP8268340
Also known as a wash arm seal.
Fixes these symptoms
Leaking
Noisy
Not cleaning dishes properly

See more...
Installation Instructions
Fred from Grafton, OH says,

Lower spray arm seal replacement
Remove upper tray and spray arm. Remove two screws retaining pipe for upper spray arm and overhead. Unscrew retainer on top of lower spray arm and remove. Gently rotate the upper feed pipe clockwise u...read more

Your Price
$31.77
Upper Spray Arm
PartSelect Number PS11752935
Manufacturer Part Number WPW10327455
The upper spray arm rotates and sprays water to clean the dishes inside the dishwasher tub. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. To check your spray arm, make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arm and check to ensure they are straight and undamaged. This spray arm is made of high-quality plastic and is just over 5 inches long.
Fixes these symptoms
Not cleaning dishes properly


Your Price
$36.40
Spray Arm
PartSelect Number PS11756698
Manufacturer Part Number WPW10605345
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Thomas from LEES SUMMIT, MO says,

The retaining nut for the center spray arm came apart and could not be replaced in the dishwasher.
With the new unit just went into place. The only disappointment was that I had to replace the whole sprayer arm as a whole unit. It would have been more cost/environmentally productive just to replace...read more

Your Price
$21.44
Water Supply Manifold Probe
PartSelect Number PS11748182
Manufacturer Part Number WPW10082831
Supplies water from the main water feed tube to the middle manifold water tube.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Installation Instructions
Dianne from FALLON, NV says,

Wheels were broken off the original upper rack assembly.
My husband and I are both very mechanical but found this repair confusing and difficult. No instructions on how to remove old parts and when I called service department was told parts had come from th...read more

Your Price
$30.20
Spray Arm Mounting Bracket
PartSelect Number PS11741381
Manufacturer Part Number WP3385159
This mount attaches the spray arm to the upper rack.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
ken from elwood, IN says,

Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place....read more

Your Price
$27.00
Middle Spray Arm
PartSelect Number PS11748185
Manufacturer Part Number WPW10082841
The spray arm in your dishwasher spins and sprays the water that is used to clean your dishes. If the spray arm is damaged, your dishwasher will not clean properly, and you will need to replace it. Many of our customers have rated this repair as easy, and to complete the repair you will simply need to unscrew the old arm, and replace it with a new one. Make sure the jets are facing upward when you secure the new arm. This part is made of gray plastic and is approximately 18 inches wide.
Fixes these symptoms
Not cleaning dishes properly


Your Price
$29.62
Lower Spray Arm Support/Hub
PartSelect Number PS11745437
Manufacturer Part Number WP8268342
This part is used with the lower spray arm.
Fixes these symptoms
Noisy
Not cleaning dishes properly
Not draining

See more...
Installation Instructions
Catherine from PITTSFIELD, PA says,

Broken plug
The instruction video absolutely helped me. I was really pleased that I received a frig magnet because I will use this company for all my DIY PARTS...read more

Your Price
$6.25
Wash Arm Cap
PartSelect Number PS11747698
Manufacturer Part Number WP99002654
This part is the replacement wash arm cap, also known as the spray arm nut, for your dishwasher. It is made of white plastic and is approximately ½ an inch in diameter. The wash arm cap fastens the lower spray arm to the pump housing. If the arm cap is damaged or missing, the arm can wobble or fall off during operation, and this can make it extremely difficult to wash your dishes effectively. To replace the wash arm cap, simply remove it from the spray arm, and replace it with the new cap. This part is an authentic OEM part from the manufacturer, and is sold individually.
Fixes these symptoms
Noisy
Not cleaning dishes properly


Installation Instructions
CHRISTOPHER from Spalding, NE says,

Wash Quality Was Getting Bad
The upper arm was held in by a torx screw. The shoulder on the screw held the arm in place. Once removed I simply swapped parts and installed screw. The lower arm was held on by a plastic nut with...read more