KitchenAid Range Legs and Feet | OEM Replacement Parts

Your Price

$13.86

Grate Pads - Set of 4

★★★★★

6 Reviews

PartSelect Number PS988447

Manufacturer Part Number 8186321

Also known as grate feet.

Your Price

$9.60

Burner Grate Pads - Kit of 5

★★★★★

7 Reviews

PartSelect Number PS389174

Manufacturer Part Number 814323

These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

Installation Instructions

Eric from Durango, CO

Too much heat caused the turntable to shatter and the table support ring to melt.

Washed the turntable and placed it in the microwave. Read more...

Videos!

Your Price

$10.83

Leveling Leg

★★★★★

5 Reviews

PartSelect Number PS11744009

Manufacturer Part Number WP74002557

This is a leveling leg for your oven, range, or stove. The leveling legs on your oven allow your appliance to sit perfectly flat. The new one may be longer in length than your original, but will work the same. Install the new leveling leg, and test if you have it adjusted properly by putting the appliance on four legs. Adjust in or out as required if your oven is rocking. It is recommended to check the other three leveling legs on your appliance in case they are also damaged or worn. The leveling leg measures 1.859", is all black in color, and is made entirely out of plastic. This leg may be shorter than the original but is the factory replacement. Longer leg is not available.

Installation Instructions

Eric from Goldens Bridge, NY

cracked glass top and broke leveling leg in moving the stove

Directed my wife because I have shoulder injury. She did all the work. Read more...

Your Price

$13.78

Grate Feet - Kit of 4

★★★★★

2 Reviews

PartSelect Number PS2330208

Manufacturer Part Number W10185266

This kit contains 4 grate feet for a range. These are the feet to fit your burner grates so the burner will not scratch your cooktop. The are black in color and made of rubber. These feet are fitted with a specific fire-resistant adhesive. If necessary, be sure to order adhesive separately. Be sure your burners are off and have cooled down to the touch before replacing these parts.

Installation Instructions

RICHARD from BROKEN ARROW, OK

replace pads or feet on steel grate of gas stove

pull old ones out of legs. need to glue new ones in, they fit too loose. Some kits contain glue. get some high temp head gasket cement. a drop on each one is plenty. I used some old porcelain glue and hope it will hold. the pads are 2 bucks each plus shipping so don't let them get away!!! Read more...

Videos!