KitchenAid Range Hood Filters
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular KitchenAid Range Hood Filters
KitchenAid Range Hood Filter
PartSelect Number PS11769929
Manufacturer Part Number W10915369
This grease filter is designed for use in range hoods. It is sourced directly from the equipment manufacturer and has dimensions of approximately 7 1/2 inches wide, 8 3/4 inches in height, and 1/2 inches in depth. The filter is responsible for trapping grease, smoke, and other odors created during cooking, and preventing them from circulating back into the kitchen. It has an aluminum mesh layer which primarily captures grease particles, and a charcoal layer, also known as a carbon filter, which primarily absorbs and reduces odors and smoke particles. Carefully lift out the old filter from the range hood and dispose of it. Align the new filter in its compartment and secure it in place with the appropriate fasteners.
KitchenAid Range Hood Grease Filter
PartSelect Number PS2372036
Manufacturer Part Number W10169961A
Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.
Installation Instructions
Anneliese from Sarasota, FL
Old grease filters were coming apart due to two tiny lost screws which had popped out. Tried to replace them at ACE Hardware and found nothing that tiny! Therefore just ordered replacement grease fikterd.
The only poroblem I had was finding the Model number. I entered WWW….instead of WVW (my eyesight and error??.Receiving the new filters was prompt! THANK YOU!
Read more...
KitchenAid Range Hood Grease Filter
PartSelect Number PS11751169
Manufacturer Part Number WPW10252087
Sold individually.
KitchenAid Range Hood Charcoal Filter Set
PartSelect Number PS2367296
Manufacturer Part Number W10272068
Charcoal filters are used within range hood assemblies to reduce or eliminate unpleasant odors by capturing any contaminants from cooking fumes, to improve air quality, and reduce smoke when cooking. This charcoal filter set includes 2 charcoal filters that are installed within the range hood assembly, near the fan. It is recommended that you change these filters every few months, so consider that when ordering your filters. These filters are approximately 8 inches in diameter and feature 2 notches on each side to easily remove and install. To replace these filters, gain access within your range hood and twist the existing filters and pull them off to remove them. Install the new filters and twist them onto their respective notches and reassemble the range hood assembly.
KitchenAid Range Hood Grease Filter
PartSelect Number PS11753989
Manufacturer Part Number WPW10381779
Sold individually.
KitchenAid Range Hood Filter
PartSelect Number PS11751889
Manufacturer Part Number WPW10281491
Discover the genuine OEM Grease Filter from Whirlpool, designed to trap grease from exhaust air for optimal range hood performance. Crafted for efficient functionality, it fits seamlessly with selected models of Whirlpool, enhancing your appliance's longevity and efficiency. Keep in mind, while parts might appear identical, subtle size and shape variations can occur. Therefore, ensure this component is the right fit for your model by referring to your owner's manual before purchase. Please follow the specific instructions provided in your manual for hassle-free installation of this filter. Invest in your appliance's longevity and performance with this Whirlpool Grease Filter.
KitchenAid Range Hood Grease Filter
PartSelect Number PS11754181
Manufacturer Part Number WPW10396091
Sold individually. Grease filter, 13" Inches long. *Note: Peel protective cover off before install.
KitchenAid Range Hood Grease Filter
PartSelect Number PS11753824
Manufacturer Part Number WPW10368696
Sold individually.
KitchenAid Range Hood Charcoal Filter - 3 Pack
PartSelect Number PS3502126
Manufacturer Part Number W10412939
This part includes 3 charcoal filters.
KitchenAid Range Hood Grease Filter
PartSelect Number PS11753857
Manufacturer Part Number WPW10370046
Sold individually.
Installation Instructions
Onofre from El Dorado Hills, CA
fan is working except there is not enough air flow the filter is full of residue or oil
what i did itook the right part number basing on the model number of the unit so i can order and get the exact filter that fits to the unit and it did"nt take me ten min. to remove ,use pliers to hold the tabs and pull it towards you and downward and it comes off easy,to put the new one in is more like the same way slide the filter to the holder brackets and pull it towards you and then realease and it will slide forward and sit in place done deal.
Read more...