KitchenAid Cooktop Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular KitchenAid Cooktop Parts
Your Price
$10.09
In Stock
KitchenAid Cooktop Drip Bowl - 6 Inch
PartSelect Number PS2366565
Manufacturer Part Number W10196406RW
If your element will not heat, there could be an issue with your drip bowl. This chrome drip bowl is 8 inches in diameter, and fits most electric ranges. Before you replace the drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and replace the element. Make sure the small hole on the bowl lines up with the element socket. The manufacturer has substituted this part, it now has a hole in the center, and no longer has a solid bottom. For a step by step guide, click the video below.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Michael from Kings Park, NY
Drip bowls were rusty and rotting through
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better!
Read more...
Your Price
$10.84
In Stock
KitchenAid Cooktop Drip Bowl - 8 Inch
PartSelect Number PS2366563
Manufacturer Part Number W10196405RW
This part is located beneath the element and catches any spills.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Michael from Kings Park, NY
Drip bowls were rusty and rotting through
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better!
Read more...
Your Price
$16.69
In Stock
KitchenAid Cooktop Knob - Chrome
PartSelect Number PS11744713
Manufacturer Part Number WP7737P245-60
This chrome OEM control knob measures 1 1/2" in diameter. It easily attaches onto the D-shaped shaft in order to allow controls to be used. Refer to your model number and user manual to ensure this part is correct for you. This part is sold individually. We recommend replacing all control knobs for your unit at the same time, as they wear at a consistent rate to one another. This very easy repair should only take a few moments to complete; just slide the old knob off the shaft and the new one on.
Fixes these symptoms
- Element will not heat
- Touchpad does not respond
- Will Not Start
- See more...
Installation Instructions
Denise from Los Angeles, CA
The knob broke during my housekeepers last kitchen clean up.
Opened the package and put the new knob on my fan for my stove top.
Read more...
Your Price
$13.37
In Stock
KitchenAid Cooktop Surface Burner Plug-in Block Kit
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.
Way to go Part Select.com
Jon Read more...
PartSelect Number PS340571
Manufacturer Part Number 330031
The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Jon from Oakley, CA
Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.
Way to go Part Select.com
Jon Read more...
Your Price
$17.69
In Stock
KitchenAid Cooktop Cleaner
PartSelect Number PS3492527
Manufacturer Part Number W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain cooktop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
Installation Instructions
Vancine from AURORA, CO
Your Price
$36.80
In Stock
KitchenAid Cooktop Surface Burner - 8 Inch 2600w
PartSelect Number PS11743367
Manufacturer Part Number WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Jonathan from Lilburn, GA
8 inch burner wouldn't come on. Wires shorted out
One screw holds the block onto the stove top. Had to clean out fitting for phillips screwdriver or screw would have stripped because it was old with lots of buildup. Even cleaned out, this screw required great force with phillips screwdriver to keep from stripping. Caution! If you strip it, you'll have to drill it out! The rest was a snap. Cut the old wires leading to the old block (not too close to where wires disappear into back of stove, though!). Strip insulation off both wires and attach with the connectors that came in the kit. Then push the wires into the block, and finally, attach the block back to the stove top (new screw is supplied). Restore power and everything should be fine. One problem: Roper/Whirlpool built their appliance in such a way that when the connector block shorts out, it usually takes the infinite switch with it. So I ended up having to go back and purchase that switch as well (which just so happens to cost twice to three times as much!). If you put it all back together and it still doesn't work, that's probably what happened, so go ahead and remove the knob panel and check that switch (it's right behind the control knobs on the front). You will probably find a burned connector at the back top left or the switch. Don't forget to write down which wire goes where (or just take a picture of it).
Read more...
Your Price
$104.50
In Stock
KitchenAid Cooktop Dual Surface Element (3000w/1400w)
PartSelect Number PS16543522
Manufacturer Part Number W11517959
This is a dual surface element for compatible ranges. If the surface heating element for your range is currently not turning on or has issues heating up or maintaining a heat level, it will need to be replaced. This surface heating element features two burners, one smaller involving an inner 1400W element, and one larger burner involving both the inner and outer ones (3000W). Replacing this dual surface element will require a screwdriver or drill, as well as wire cutters and needle-nose pliers. This surface element is sold as an individual OEM part, so you may need to consider how many heating elements you need before ordering.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
MELISSA from CHAPLIN, CT
Your Price
$8.46
In Stock
KitchenAid Cooktop Grate Pads - Set Of 4
PartSelect Number PS988447
Manufacturer Part Number 8186321
Also known as grate feet.
Installation Instructions
Christine from JOHNSTOWN, CO
Too Small
Your website says these are the replacement rubber tips for the grates on the range. They arrive and they are too small and fall out. I spoke to the "chat" on your website. I am informed they do not sell the rubber tips separately. You have to purchase a new set of grates for $294. Ridiculous. Why sells rubber tips for grates that don't fit the existing grates. I wasted $24 in purchasing the grates which included $9.99 shipping and $5.40 shipping to return the item.
Read more...
Your Price
$31.36
In Stock
KitchenAid Cooktop Burner Knob - Stainless Color
PartSelect Number PS11744702
Manufacturer Part Number WP7733P410-60
This stainless burner knob is used in ranges and ovens. The knob allows you to adjust the heat of the surface burner on your range. This knob accepts a D-shaped shaft. If your touchpad does not respond, the knob does not rotate, gets stuck, or the gas igniter glows but does not light, changing out this part can solve your problem. No tools are needed for this easy replacement. Make sure to unplug your range from the power source before installing. Refer to the manual provided by the manufacturer for further guidance.
Fixes these symptoms
- Gas igniter glows, but will not light
- Touchpad does not respond
- Will Not Start
- See more...
Installation Instructions
Michael from South Lake Tahoe, CA
BURNER KNOBS MELTED, Burned out electrode
R&R OLD knobs easy .R&R BURNER W/ ELECTRODE, UNSCREW LIFT OFF, UNPLUG SEECTRODE Reverse procedure easy
Read more...
Your Price
$7.85
In Stock
KitchenAid Cooktop Grate Feet - Kit Of 4
PartSelect Number PS2330208
Manufacturer Part Number W10185266
This kit contains 4 grate feet for a range. These are the feet to fit your burner grates so the burner will not scratch your cooktop. The are black in color and made of rubber. These feet are fitted with a specific fire-resistant adhesive. If necessary, be sure to order adhesive separately. Be sure your burners are off and have cooled down to the touch before replacing these parts.
Installation Instructions
RICHARD from BROKEN ARROW, OK
replace pads or feet on steel grate of gas stove
pull old ones out of legs. need to glue new ones in, they fit too loose. Some kits contain glue. get some high temp head gasket cement. a drop on each one is plenty. I used some old porcelain glue and hope it will hold. the pads are 2 bucks each plus shipping so don't let them get away!!!
Read more...
KitchenAid Cooktop Appliance Types
Related KitchenAid Cooktop Parts
- KitchenAid Cooktop Elements and Burners
- KitchenAid Cooktop Hardware
- KitchenAid Cooktop Knobs
- KitchenAid Cooktop Valves
- KitchenAid Cooktop Switches
- KitchenAid Cooktop Igniters
- KitchenAid Cooktop Grates
- KitchenAid Cooktop Cooktops
- KitchenAid Cooktop Seals and Gaskets
- KitchenAid Cooktop Insulations
Popular KitchenAid Cooktop Models
Below are the most popular KitchenAid Cooktop models we have. Enter your model number in the search box to find your model.
- KECD807XBL00
- KECD807XBL01
- KGCD807XSS02 GAS COOKTOP
- KECD805HBL3
- KCED600GBL00 ELECTRIC COOKTOP
- KECC508GBL3
- KICU569XBL00
- KCGS356ESS00 GAS COOKTOP
- KGCD807XBL00
- KCGS556ESS02 GAS COOKTOP
- KCGD506GSS00 GAS COOKTOP
- KGCS166GSS07
- KECD807XSS01
- KECD807XSS00
- KGCS166GSS05
- KGCK366VSS01
- KGCD807XSS01
- KGCS166GSS2
- KGCD807XBL02 GAS COOKTOP
- KGCD807XSS00