Kenmore Washer Legs and Foots

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Washer Legs and Foots

Your Price
$9.13
  Special Order
Screw-In Plastic Leveling Leg
★★★★★
★★★★★
(3)
PartSelect Number PS1152204
Manufacturer Part Number 134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your appliance to make it leveled. This model is made entirely of plastic and is white in color. It is just under 2.5 inches long, 1.5 inches wide, and the head has a diameter of roughly 1.5 inches.
Installation Instructions
Sandra from Denton, TX
Stopped agitating versus level washer feet/leg
My washing machine stopped agitating and spinning and I couldn't afford a repair man...plus I wanted to exhaust any obvious problems first. One of the leveler feet had broken years ago. Since I luckily had determined via reading other posts that the agitator won't work if the cycle safety switch is not functioning right, I thought the safety switch might need to be changed but after careful thought, I decided to order a new levelling leg first because maybe the broken levelling leg was shaking the safety switch so it wasn't connecting right. Once I received the leg overnight, I flipped the washer on its side and had to drill out the old leg. It was a little tricky because of how it broke, but the drill worked. I flipped the washer back up, leveled it with the new foot, and the agitator was miraculously working again...just like new. I didn't need the safety switch. Thanks to partselect.com for having the details of my washer parts to study up on and get me the right part so quickly. I saved myself alot of money. Read more...
Your Price
$5.51
  In Stock
Foot, Front - Single
★★★★★
★★★★★
(1)
PartSelect Number PS11747965
Manufacturer Part Number WPW10001130
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.
Fixes these symptoms
Installation Instructions
Paddy from Ferndale, WA
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...
Your Price
$11.15
  In Stock
Leveling Foot
PartSelect Number PS11744907
Manufacturer Part Number WP8181636
Sold Individually.
Installation Instructions
Lydia from Cincinnati, OH
Clothing ripped my bellow.
I removed the outer tub clamp using two needle-nosed pliers. Then I folded the bellow back and removed the bellow from the dispensing outlet. I then losened the bellow clamp using a screw driver. It was on there very securely. Then I had my daughter with her smaller hands finish untightening the screw enough to release the bellows from the machine. Then the bellow and clamp were taken out of the machine carefully, not scratching anything and noting orientation for new bellow. I cleaned the machine surfaces. Next, lining up the top notch on the bellow, it was worked into the groove around the entire inner basket. The bellow also had to have the hole covering placed over the dispensing outlet. This was the most time consuming. Just to make certain that it was positioned correctly took 20 minutes. I then put the bellow clamp back on and tightened it to the very tight positioned it was in prior to being removed. My daughter returned to help with the smaller bellow clamp that goes to the front of the machine. I needed help keeping one side of the clamp in placed while the other side was stretched out again to go onto the bellow. Then the machine was leveled top to back, side to side, leg nuts tightened. Works quieter than ever. Read more...
Your Price
$13.58
  In Stock
Rear Leveling Foot
★★★★★
★★★★★
(1)
PartSelect Number PS334463
Manufacturer Part Number 285244
Sold Individually. Used to help stabilize the appliance on uneven surfaces.
Fixes these symptoms
Your Price
$10.64
  In Stock
Leveling Leg with Foot
PartSelect Number PS11738005
Manufacturer Part Number W10862938
Sold individually.
Fixes these symptoms
Your Price
$15.45
  In Stock
Leveling Foot & Nut
PartSelect Number PS11746502
Manufacturer Part Number WP8563585
Sold individually.
Installation Instructions
Linda from Arcadia, IN
missing parts on used washer and dryer pedstals
screwed on

hard to find parts - order on Thurs evening and got Sat - made problem really easy
Read more...
Your Price
$21.86
  In Stock
Leveling Leg
★★★★★
★★★★★
(1)
PartSelect Number PS2349253
Manufacturer Part Number 134639100
Sold individually.
Your Price
$10.24
  In Stock
Single Motor Grommet
★★★★★
★★★★★
(1)
PartSelect Number PS11743304
Manufacturer Part Number WP62691
Sold Individually.
Fixes these symptoms
Installation Instructions
Robert from Friendswood, TX
Spider coupling between motor and transmission broken
Followed the video on the website. I removed the hoses from the pump rather than removing the pump as suggested in the video. Then separated the motor from the transmission and replaced the coupling; then reattached the motor and hoses. Lining up the washer cover and clamping it back on was the most trouble. But all in all, a easy repair. Read more...
Your Price
$10.59
  In Stock
Rear Leveling Leg
★★★★★
★★★★★
(1)
PartSelect Number PS11741869
Manufacturer Part Number WP358594
This leveling leg is sold individually.
Leg Assembly
PartSelect Number PS3532320
Manufacturer Part Number AFC72755401
This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can thread it in or out to adjust the height. The foot on this leg is made of rubber, which helps with grip, stabilization, and vibration reduction. It is also hexagonal in shape, which allows you to more easily adjust it. This levelling leg features a locknut on the shaft which can be tightened against the bottom of your appliance, this will stop the leg from rotating while you are using your washer. This replacement is sold individually.

Related Parts