Kenmore Microwave Glass Tray and Supports

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Microwave Glass Tray and Supports

Your Price
$60.75
  In Stock
Glass Cooking Tray
★★★★★
★★★★★
(44)
PartSelect Number PS373741
Manufacturer Part Number 4393799
This a genuine OEM microwave cooking tray. It is also known as a microwave turntable or microwave plate. The function of the tray is to hold and rotate food items while the appliance is in use to ensure the food is being heated evenly. This cooking tray is made of transparent glass, and may need to be replaced if the tray is cracked or broken. A broken tray may prevent it from rotating if the three partial circles on the bottom of the tray will not connect to the turntable driver. This part is sold individually and is approximately 12 inches in diameter. It is recommended to check the drive coupling, or turntable driver, if tray is not turning.
Fixes these symptoms
Installation Instructions
Eric from Durango, CO
Too much heat caused the turntable to shatter and the table support ring to melt.
Washed the turntable and placed it in the microwave. Read more...
Your Price
$9.57
  In Stock
Turntable Coupler
★★★★★
★★★★★
(26)
PartSelect Number PS651211
Manufacturer Part Number WB06X10420
This turntable motor coupler connects the turntable motor to the turntable tray to activate the tray. If your tray does not consistently turn or does not turn at all, replace this part. This part measures 1 1/2" in diameter. Remember to unplug your microwave from the power source as a safety precaution. Refer to the openers manual provided by the manufacturer for further installation instructions and accurate guidance.
Fixes these symptoms
Installation Instructions
Scott from Manville, NJ
Original Turntable Coupler shaft broke in two pieces
I was able to simply lift the broken turntable coupler from the bottom of the microwave. The smaller broken piece fell inside the body of the microwave. I tried unsuccessfully to retrieve it. When the new part arrived, I simply snapped it in place. Everything works good as new! Read more...
Your Price
$65.86
  In Stock
Glass Cooking Tray
★★★★★
★★★★★
(14)
PartSelect Number PS990918
Manufacturer Part Number 8205992
This part is a replacement glass cooking tray for your microwave. The cooking tray rotates when the microwave is running, and helps your food cook evenly. As it is made of glass, these glass cooking trays will occasionally crack or break. If your cooking tray is broken it may not rotate, and you will need to replace it. This part is sold individually, and is approximately 16 inches in diameter. This is an OEM part from the manufacturer.
Installation Instructions
Mark from Agua Dulce, CA
Glass cooking tray broke
There was no "fixing" per say but we still could not use the microwave without the plate. This has to be one of the biggest plates for a microwave. We ordered this through your company and we had it three days later. THREE DAYS! We had expected anywhere from 1-2 weeks. My husband was so impressed he bookmarked your site for future reference. Thank you for being so efficient and prompt. The glass turntable fit like a glove! Sincerely, Mark and Lia Hammond Read more...
Your Price
$85.94
  In Stock
Glass Cooking Tray
★★★★★
★★★★★
(24)
PartSelect Number PS956214
Manufacturer Part Number WB49X10129
There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
Installation Instructions
Ramona from Woodbridge, VA
Tray Glass Broken
I broke the tray glass in the microwave cleaning it so this was a no brainer. The best part of this was the PartSelect experience. I ordered the part on the 30th of December and received it on 3 Jan!!! I have used PartSelect before for fridge repair and had the same experience. Read more...
Your Price
$94.14
  In Stock
Cooking Tray
★★★★★
★★★★★
(14)
PartSelect Number PS248248
Manufacturer Part Number WB39X10003
This is a cooking tray and it is a common component in any microwave. This piece is transparent and is made of glass. The diameter of this part measures to be roughly 12.5 inches. Although you may find it to be slightly smaller than the original tray it is a genuine OEM replacement part that is sourced directly from the manufacturer. The function of the cooking tray is to provide a stable surface that rotates in the center of your microwave. The purpose of this piece is to help ensure food cooks evenly in your microwave every time.
Fixes these symptoms
Installation Instructions
Ruth from New Bern, NC
A Cooking Tray developing a growing crack
The unbelievable happened. Our glass carousel cooking tray developed a crack. Each day the crack got longer. I ordered a new one on Tuesday and it arrived the next morning just before the cracked one completely cracked. I have never experienced such fast service. I highly recommend PartSelect and their helpful service. Read more...
Your Price
$31.04
  In Stock
Drive Coupling
★★★★★
★★★★★
(5)
PartSelect Number PS3507976
Manufacturer Part Number W10435116
This is an authentic manufactured drive coupling for a microwave. It fits on the motor shaft to hold and rotate the glass turntable tray while the appliance is running. This part has a D-shaped insert for the motor shaft, and measures approximately 3 inches in diameter. You may need to replace this part if the microwave tray will not turn. No tools are required for this repair. It is recommended to check the support ring before ordering the drive coupling in case the wheels are broken. This part is also known as a turntable coupling or microwave turntable support.
Fixes these symptoms
Installation Instructions
Kim from MILTON, WV
The thing that makes the plate rotate was missing
I ordered the part according to the Model number, inserted the part very easily, (and I am soooo challenged in that area) and now it turns again. :) Read more...
Your Price
$12.71
  On Order
Turntable Assembly
★★★★★
★★★★★
(13)
PartSelect Number PS3528532
Manufacturer Part Number 5889W0A001A
The turntable support assembly is also known as a roller guide, fits under the cooking tray and is used to support the tray and to engage the rotating coupler. The support assembly has 3 arms and each is approximately 4 inches long. If your cooking tray will not turn, or rumbles when it turns, check the support assembly for signs of wear or damage. If no damage can be seen, check the coupler for damage.
Fixes these symptoms
Installation Instructions
G Michael from PORTLAND, OR
Interior bulb was burned out, turntable internal gear was stripped, and turntable ass'y wheel kept falling off
Motor was simple. Just snip out the bottom cover plate, disconnect the electrical connector, and unscrew the motor. Reverse to reinstall new motor. Rotate the cut out cover plate 180 degrees, fit tabs through slots, and screw back into place.

The bulb replacement required the side/top/side shell be removed. Only surprise was that some of the attachment screws were tamper-proof torx, so I had to buy a set of tp torx bits to take it apart. They are readily available online for < $10 for a set. They look like a standard torx bit, but with a small hole drilled into the center to accommodate the tamper-proof pin.The bulb assembly has a roughly diamond shaped attachment flange, and you need to use a screwdriver to press plastic spring tabs at each end to release the bulb.
Read more...
Your Price
$27.17
  In Stock
Turntable Assembly
★★★★★
★★★★★
(14)
PartSelect Number PS3528534
Manufacturer Part Number 5889W1A003B
The turntable support assembly is also known as a roller guide and fits under the cooking tray and is used to support the tray and to engage the rotating coupler. The support assembly has 3 arms and each is approximately 4 inches long. If your cooking tray will not turn, check the support assembly for signs of damage. If no damage can be seen, check the coupler for damage.
Fixes these symptoms
Installation Instructions
Robert from JUNCTION CITY, KS
Turntable Assembly broken or missing
Open the front door of the microwave oven unit. Lift out the round glass food tray. Remove the Turntable Assembly and set it asside. Position the REPLACEMENT Turntable Assembly orienting the centering socket to the drive home in the floor of the oven cavity. Gently tap the assembly assuring it mates with the drive mechanism below. Replace the food tray centering it on the Turntable Assembly. Gently move the food tray from side to side assuring that it moves correctly. Close the oven door. Follow instructions that came with the unit for set-up instructions. Done.. Read more...
Your Price
$26.20
  In Stock
Turntable Driver
★★★★★
★★★★★
(4)
PartSelect Number PS990920
Manufacturer Part Number 8205994
Also known as the coupler. This driver is located directly under the glass turntable, and over the motor. This part helps the glass turntable to rotate.
Fixes these symptoms
Installation Instructions
duane from san diego, CA
Fire in microwave melted several parts
Remove the filters and use a Torx driver to remove two screws holding the motor. The wires on on the motor are held in place by a plastic clamp that must be pried open on one side. That's all it takes to replace the drive motor. Everything else that makes the turntable spin lifts off from inside the microwave. Read more...
Your Price
$32.54
  In Stock
Turntable Motor Coupler
PartSelect Number PS1993374
Manufacturer Part Number 5304463315

Related Parts