Kenmore Dehumidifier Parts

Why Genuine OEM Matters

Shop By Appliance Type Shop By Part Type

Popular Kenmore Dehumidifier Parts

Compressor Start Relay – Part Number: 216594300

Your Price

$39.84

Kenmore Dehumidifier Compressor Start Relay

PartSelect Number PS426380

Manufacturer Part Number 216594300

The compressor start relay attaches to the compressor in your refrigerator. If your refrigerator will not start, one of the most common parts to fail is the compressor start relay. Sometimes called the controller, this device is used to boost the compressor until the unit is running. Other common symptoms connected to start relays include: refrigerator will not start, will not cool, is making a clicking, humming or buzzing sound, or the compressor itself is warm to the touch. You may also smell a burnt plastic odor if the relay has failed. Shake the relay and listen for any rattling, as this is a sign that it is faulty.

Fixes these symptoms

Too warm
Will Not Start
Won’t start
See more...

Installation Instructions

Linda from Gurnee, IL

The compressor would not run.

I removed the cover, used a multimeter to test the compressor circuit, and found the compressor start relay to be defective.
Ordered a new one and installed it when it arrived. Read more...

Overload Protect – Part Number: 6750U-L039A

Your Price

$28.64

Kenmore Dehumidifier Overload Protect

PartSelect Number PS3529566

Manufacturer Part Number 6750U-L039A

Overload Protect – Part Number: 6750U-L048A

Your Price

$34.36

Kenmore Dehumidifier Overload Protect

PartSelect Number PS3529568

Manufacturer Part Number 6750U-L048A

PCB ASSEMBLY,MAIN – Part Number: EBR74780403

Your Price

$107.96

Kenmore Dehumidifier Pcb Assembly Main

PartSelect Number PS7792952

Manufacturer Part Number EBR74780403

KNOB, HUMIDSTAT CONTROL – Part Number: 998857

Your Price

$18.90

Kenmore Dehumidifier Knob, Humidstat Control

PartSelect Number PS406514

Manufacturer Part Number 998857

Your Price

$57.79

Kenmore Dehumidifier Air Filter

PartSelect Number PS447882

Manufacturer Part Number 327350601

Installation Instructions

Lester from Brazil, IN

Push on connectors and switch housing were different

The switch housing was not exactly the same for easy snap in. I removed the actual switch and installed it into the old housing. Then I found that the male pins were larger than the old ones. I chose to clip off the female connectores, strip the wires, and solder the wires to the pins on the switch. It was easier for me than attempting to change the push on connectors. For me, the actual switch was what I wanted and I fixed it my way. It was easy to do however some folks may want to change the push on connectors. Works great and saved me hundreds of dollars. Thanks. Read more...