Jonsered Lawn Mower Parts

Jonsered Appliance Parts

Popular Jonsered Lawn Mower Parts

Your Price
$17.95
   On Order
Jonsered Lawn Mower Bag Frame
PartSelect Number PS16374900
Manufacturer Part Number 586929102
Your Price
$7.46
   In Stock
Jonsered Lawn Mower Pulley Idler
★★★★★
★★★★★
1 Review
PartSelect Number PS11824875
Manufacturer Part Number 587969201
Your Price
$15.90
   In Stock
Jonsered Lawn Mower Blade, 22"
PartSelect Number PS9017810
Manufacturer Part Number 532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22" long, made of black metal, is not part of a kit or assembly, and is sold individually. If you hit a hard object, you may bend the blade, causing a vibration. You may also have problems with the grass being cut as the blade dulls over time. If the blade is bent, damaged, or worn, it needs to be replaced. You will need a socket set to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
Your Price
$4.99
   In Stock
Jonsered Lawn Mower Bolt- Stud - H=42.5mm
PartSelect Number PS10021937
Manufacturer Part Number 90043-ZL8-000
Installation Instructions
Charles from Memphis, TN
I had to buy Troy-Bilt parts to adjust for a Murray Lawn Mower
Grind off 1/4" of each end of the 22" blade to fit 21' Mower.
Make Bend adjustments for the Handle to fit.
Read more...
Your Price
$17.32
   In Stock
Jonsered Lawn Mower Carburetor Assembly. (Bb76a A)
★★★★★
★★★★★
2 Reviews
PartSelect Number PS12125846
Manufacturer Part Number 16100-Z8B-901
Your Price
$4.99
   In Stock
Jonsered Lawn Mower Wheel
PartSelect Number PS12630280
Manufacturer Part Number 589527301
Wheel.gage.half.spoked
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair.

HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.

HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.

HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.

HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.

HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.

HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance.
Read more...
Your Price
$14.64
   In Stock
Jonsered Lawn Mower Belt
PartSelect Number PS16370615
Manufacturer Part Number 580364609
Your Price
$4.99
   In Stock
Jonsered Lawn Mower Cover, Dust, Wheel
★★★★★
★★★★★
3 Reviews
PartSelect Number PS9982436
Manufacturer Part Number 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axle. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.
Your Price
$13.69
   In Stock
Jonsered Lawn Mower Engine Zone Control Cable
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9982488
Manufacturer Part Number 582991501
Your Price
$13.69
   In Stock
Jonsered Lawn Mower Solenoid
PartSelect Number PS16372182
Manufacturer Part Number 582042802
Installation Instructions
Russell from MACON, GA
Dryer runs no heat
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats. Read more...

Jonsered Lawn Mower Appliance Types

Related Jonsered Lawn Mower Parts

Popular Jonsered Lawn Mower Models

Below are the most popular Jonsered Lawn Mower models we have. Enter your model number in the search box to find your model.