Jenn-Air Range Cooktops

Your Price

$204.52

Jenn-Air Range Cartridge 4 Spades (stainless Steel)

★★★★★

4 Reviews

PartSelect Number PS8769936

Manufacturer Part Number JEA7000ADSA

This part has an end plug in.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Laurel from Houma, LA

I have a 26 year old stove top and the electric coils heated intermittantly. I got tired of banging on them to get them to work. I went to various local stores ( Lowe's, appliance stores) and the parts would have been twice the cost and taken a while to come in. I then googled your site and found

I popped out the old burner cartridges and gladly threw them away and popped in the new ones. They work great and no banging! I changed out the old grease filter in the down draft and put the new grill grate on top of the grill in seconds. The timer knob fit well but the burner knobs did not so I had to return those. My "new" stove top looks basically the same except new. The grill grate being black updates the look somewhat. The best thing is that the burners work. Thanks for everything. Read more...

Your Price

$220.89

Jenn-Air Range Stove Cartridge Assembly

★★★★★

4 Reviews

PartSelect Number PS9491819

Manufacturer Part Number JEA7000ADBA

This stove cartridge assembly, also known as a cooktop module, is a manufacturer-approved replacement part for your stove. It is black in color and comes complete with burner elements. Make sure to shut off power to the unit before replacing this part.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from Corfu, NY

Old element was worn out (burst in line)

First, I cut the power to the stove to be sure no electrical current could be conducted. Next, I removed the two screws that hold the heating element to the back of the stove. Then, I removed the oven racks and slowly slid the heating element out until I could see the wires that attached to it. Because the element has the female end of the wire, I pulled the male ends out of both the left and right side of the element.. This releases the old element and I discarded it. Next, I took the new element, slide the male ends into the new female ends that protruded from both the right and left side of the element. I crimped these slightly with my pliers to make sure that they would stay secure when I pushed the element into place. With the new element securely attached, I slowly slid the element into place, this forces the exposed wires to be retracted out of sight and in the insulated part of the oven. I then took the two screws that I had to removed in the beginning, and used them to fasten this new heating element to the back of the oven. Finally, I turned the power back on and the element worked fine. Read more...

Your Price

$524.95

Jenn-Air Range Glass Cooktop (black)

PartSelect Number PS2376948

Manufacturer Part Number W10239357

This black Cooktop is an OEM part for some Whirlpool ranges. It serves as the flat surface where cooking is done by using burners or a warming element. The glass-ceramic or stainless steel cooktop provides an attractive and durable cooking area.

Your Price

$322.64

Jenn-Air Range Radiant Smoothtop Cartridge Assembly

★★★★★

3 Reviews

PartSelect Number PS8768540

Manufacturer Part Number A122BA

Designer Line.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Elroy from Golden Valley, AZ

the glass burner top was broke

Unplug old burner assembly and plug in new one Read more...

Your Price

$119.95

Jenn-Air Range Cook Top Base

PartSelect Number PS11738714

Manufacturer Part Number WP2001F175-09

Installation Instructions

David from MECHANICSVLLE, MD

Replaced old Jenn Air cook top base

Prepare a flat area with newspaper, a screwdriver, and a small bowl for the screws, and a small wire brush (if you want to clean as you go). I also recommend taking photos as you proceed, for reference.

ALSO, take close note of the orientation of the cook top base, one end has a lip that's allows for burner assembly removal.

Remove entire two burner assembly, place upside down on newspaper, remove seven Phillips screws, remove assembly bottom.

Remove small screws from gas tubes, pay close attention as you remove the gas tube from the bottom of the burner, to the orientation of the two washers (the washers have an edge).

Remove the burner tubes and washers.

Carefully remove the igniter connectors from igniter.

Remove the end of the assembly.

Grasp the burners, and turn to rotate the burner to a position where the "bumps" on the burner match up with the gaps in the burner cook base. Remove the burners.

The old burner base can be set to the side. At this time i cleaned the burners throughly with a small toothbrush size wire brush.

Assemble the burners to the new top base by aligning the bumps to the opening in the cook top base, turn slightly to keep burner in place. Insert the gas tubes, with the washers (be careful about the washer lip orientation) with the smaller screws, do not overtighten!

Attach the igniter connector to the igniters.

Align the burner/gas tubes with the assembly end. Carefully set the base into place, adjust the tubes as necessary to get the screws aligned with the holes. Install the screws, tighten hand tight.

Install entire assembly into cook top, check igniter and burner operation.

Glass cleaner is great for cleaning the new porcelain surface. Read more...

Your Price

$137.15

Jenn-Air Range Cooktop

PartSelect Number PS3501864

Manufacturer Part Number W10352966

Your Price

$137.15

Jenn-Air Range Cooktop

PartSelect Number PS3501865

Manufacturer Part Number W10352967

Your Price

$135.75

Jenn-Air Range Cooktop

PartSelect Number PS3501866

Manufacturer Part Number W10352969

Your Price

$71.95

Jenn-Air Range Cartridge Top - Stainless Steel

PartSelect Number PS11738729

Manufacturer Part Number WP2002F208-50

This is just the top portion of the cartridge. All other parts sold separately.

Installation Instructions

Judy from Florence, AL

i needed a new top for my jenair

i just ordered the part and replaced it with stainless steel. i am so glad the saleslady told me about it. my stove looks brand new. my drip pans look so nice with my new cover. Read more...