Jenn-Air Microwave Glass Tray and Supports
Find your partEnter your model number or a part number and click "Search"
Here is an example model number plate:
Popular Jenn-Air Microwave Glass Tray and Supports
Glass Cooking Tray
PartSelect Number PS373741
Manufacturer Part Number 4393799This a genuine OEM microwave cooking tray. It is also known as a microwave turntable or microwave plate. The function of the tray is to hold and rotate food items while the appliance is in use to ensure the food is being heated evenly. This cooking tray is made of transparent glass, and may need to be replaced if the tray is cracked or broken. A broken tray may prevent it from rotating if the three partial circles on the bottom of the tray will not connect to the turntable driver. This part is sold individually and is approximately 12 inches in diameter. It is recommended to check the drive coupling, or turntable driver, if tray is not turning.
Eric from Durango, CO
Too much heat caused the turntable to shatter and the table support ring to melt.Washed the turntable and placed it in the microwave. Read more...
PartSelect Number PS3654579
Manufacturer Part Number W10337248This glass tray drive coupling, also known as a tray support, is a genuine OEM replacement part. It can help solve the issue of your microwave tray not turning properly. This motor couple connects the motor to the turntable. To replace this part, make sure the microwave is unplugged first. Remove the glass tray, and the existing coupling. Insert the new coupling into the motor shaft.
Michael from YUMA, AZ
Rattling noise when turn table was in motionUnplug any appliance before any work is done. The microwave is a hanging unit under kitchen cabinets. First I removed the turn table, rollers, and connector by lifting them out. Second I removed all the attaching Phillips head screws that hold the bottom cover on. Once removed the cover will hang and give access to the drive motor gear assembly. It's held in place by 2 torques head screws. Remove these, lower the motor, and disconnect the 2 wires that plug onto it. A small pick or similar tool is needed to release the connectors latches. reassemble in reverse. Read more...
Microwave Glass Turntable Tray
PartSelect Number PS12745298
Manufacturer Part Number W11402532The turntable tray rotates in the centre of the microwave to help ensure the food cooks evenly.
Eric from MYRTLE BEACH, SC
Broken glass tray-cookPut New tray in convection microwave,closed door and it was done. Read more...
PartSelect Number PS3507976
Manufacturer Part Number W10435116This is an authentic manufactured drive coupling for a microwave. It fits on the motor shaft to hold and rotate the glass turntable tray while the appliance is running. This part has a D-shaped insert for the motor shaft, and measures approximately 3 inches in diameter. You may need to replace this part if the microwave tray will not turn. No tools are required for this repair. It is recommended to check the support ring before ordering the drive coupling in case the wheels are broken. This part is also known as a turntable coupling or microwave turntable support.
Kim from MILTON, WV
The thing that makes the plate rotate was missingI ordered the part according to the Model number, inserted the part very easily, (and I am soooo challenged in that area) and now it turns again. :) Read more...
PartSelect Number PS11754954
Manufacturer Part Number WPW10451786This cook tray is also known as a glass tray, glass plate, or microwave plate. It is clear in color and measures about 14 inches in diameter. It is made entirely of glass. This microwave tray rotates and holds your food as it is being cooked. Pleas consider replacing your turn ring or turn shaft if your microwave plate will not rotate.
PartSelect Number PS11723131
Manufacturer Part Number W10818723
Glass Cooking Tray
PartSelect Number PS11744901
Manufacturer Part Number WP8172138This tray rotates in your microwave ensuring more even temperatures. It is used to hold containers and plates of food or beverages that you heat up inside of the appliance. If you notice that the tray is no longer able to turn on its own or has broken, it may need to be replaced. This part is made of clear glass and is approximately 13 inches in diameter and weighs approximately 3.504 lbs. There are no tools required to complete this repair. Simply place the turntable tray on top of the turning device in your microwave and dispose of the old plate.
Tami from Quincy, IL
I dropped and broke the glass cooking trayAfter shopping all over town trying to find a new tray I discovered PartSelect.com, I called and ordered the tray and received it the next afternoon. It couldn't have gone smoother. Read more...
Circular Turntable Support with Wheels
PartSelect Number PS11750386
Manufacturer Part Number WPW10207752This roller guide sits underneath the glass turntable tray.
Michael from KEARNEY, NE
Small plastic Wheel kept falling off turntable on microwave.I tried to fix the wheel but the plastic hub had worn too small. After messing with it for a month, I ordered the support ring with 3 wheels from this site. this site said it would fit many brands of microwaves. I was glad I ordered it. It was very affordable and is better than the original. The replacement part is made with heavier duty material than the original and it works perfect. I picked up the microwave plate and grabbed the old one and threw it in the recycle bin and put the new turntable support under the plate, put the plate back on top and closed the door!! Works perfect! Even a novice can do this repair!! Read more...
PartSelect Number PS12074822
Manufacturer Part Number W11110134This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.
jeff from las vegas, NV
replace spindle on turning tableexact part in with the new out with the old Read more...
PartSelect Number PS11757102
Manufacturer Part Number WPW10679311
verlon from Memphis, TN
broken turntable ring-turnopen door, remove glass turntable, replace broken ring-turn with new one. replace glass turn with new one. thats how easy it would be if i had received the new ring-turn. this item weighs 10 to 11 ozs. i ordered this item on oct 13 and it arrived in martinburg WV on oct 15 and there it remained for THIRTEEN DAYS!!! before toward my destination. still no approx time of delivery. i assume that it will be delivered on oct 29 since it has reached a city in mississippi and i,m in a 15 to 20 min drive away. two stars is all that i can offer for this order. Read more...