Jenn-Air Dishwasher Wheels and Rollers

Jenn-Air Appliance Parts
Shop By Part Type

Popular Jenn-Air Dishwasher Wheels and Rollers

Your Price
$32.88
  In Stock
Dishwasher Lower Dishrack Wheel Assembly - Gray
★★★★★
★★★★★
(211)
PartSelect Number PS11722152
Manufacturer Part Number W10195416V
This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
Installation Instructions
Thomas from WEST OLIVE, MI
Broken wheel unit on the bottom dish rack
All you do is pop out the old wheel unit at two (2) points on the plastic wheel housing and pop in the new one. Easy fix. Less than a 5 minute fix. Read more...
Your Price
$44.64
  In Stock
Dishwasher Lower Dish Rack Roller
★★★★★
★★★★★
(58)
PartSelect Number PS11750057
Manufacturer Part Number WPW10195417
The Dishwasher Lower Dishrack Roller is a grey plastic part which attaches to the bottom of the lower dishrack, allowing you to slide it easily in and out. If the rack no longer moves smoothly or shows visible damage then it may be time to replace it. Check your model number and user manual to see if this is the right part for your appliance. To attach this part to your dishwasher, align the adjustable tines with the middle slot in the roller assembly. From there, it should just snap into place on the rack. The wheels and pins for this part are only sold as an assembly of two per set in this part, unfortunately, these individual components are not available to purchase separately.
Installation Instructions
Dan from HUNTERTOWN, IN
one wheel came off a lower rack 2 wheel roller piece
push the 2 retaining clips back with my fingers and slide off the broken roller piece. Slide the new replacement 2 roller piece into place and push up until the retainer clips click and lock. Read more...
Your Price
$8.60
  In Stock
Lower Wheel Assembly
★★★★★
★★★★★
(12)
PartSelect Number PS11747757
Manufacturer Part Number WP99003149
The lower wheel assembly in your dishwasher allows the lower dish rack to roll in and out effectively. If you notice that one of the dish rack wheels is damaged or missing, this is the part you will need to replace it. This part consists of the wheel and axle or clip that holds it on the dish rack. This wheel assembly is sold individually. This lower wheel assembly is made of plastic, is gray in color and the wheel itself is approximately 1 and 3/4 inches in diameter. Many of our customers have rated this repair as easy. To complete this repair, simply remove the old wheel assembly, and snap the new one into place.
Fixes these symptoms
Installation Instructions
Kathryn from Oak Creek, CO
One of the wheel assemblies fell off and melted in the dishwasher.
I ordered the part and snapped it on. It was so easy to find the part on the website and it came very quickly. I am a satisfied customer! Read more...
Your Price
$25.47
  In Stock
Dishwasher Upper Rack Roller
★★★★★
★★★★★
(22)
PartSelect Number PS11753471
Manufacturer Part Number WPW10350401
This assembly is the wheel and the mount for your upper dishrack. Sold individually. This is an authentic OEM part for use with Whirlpool, KitchenAid, Kenmore and Jenn-Air Dishwashers. The dishrack wheel lets you roll the rack easily on the support rails. This part is sold individually. The most common reason for replacing the dishrack wheel is if it breaks causing the rack to jam. The tool that you will need to replace the dishrack wheel is a flathead screwdriver.
Your Price
$8.87
  In Stock
Lower Wheel Assembly
★★★★★
★★★★★
(17)
PartSelect Number PS11747717
Manufacturer Part Number WP99002780
This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you are moving it in or out, it could be that the lower wheel assembly needs to be replaced. The dishrack wheels allow for easy movement of the dishrack in and out of the dishwasher. These rollers tend to wear down at the same speed, so it is recommended to replace both pairs at the same time. Open your dishwasher and remove the bottom rack, locate the locking tab, and rotate until it easily slides out of place. Slide the new wheel over the shaft and locate the locking tab to snap back into place.
Fixes these symptoms
Installation Instructions
Walter from Tucson, AZ
Broken latch handle
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit. Read more...
Your Price
$8.05
  In Stock
Upper Wheel Assembly
★★★★★
★★★★★
(7)
PartSelect Number PS11747756
Manufacturer Part Number WP99003148
This part attaches to the upper rack to help the dishrack to move in and out along the track of the dishwasher smoothly. If your dish rack is not moving in and out of the dishwasher properly or with ease, you may have a broken or missing roller and it will need to be replaced. The roller and axle are made of plastic, are a little over an inch in size, gray in color and sold individually. This is a genuine OEM kit.
Fixes these symptoms
Installation Instructions
Donna from West Newbury, MA
A couple of wheels fell of and melted in the dishwasher.
I used to love my dishwasher, but the top shelf was hanging and the bottom rack kept getting hung up. I was helping clean up at a friends house and was very envious of how nice her dishwasher was working. I was considering getting a new one. Then I decided to go online and see if I could find the parts. For under $15.00 I purchased both wheel assemblies. Also, I received them the next day!! Now, I love my dishwasher again.... Read more...
Your Price
$5.65
  In Stock
Dishwasher Dishrack Roller
★★★★★
★★★★★
(6)
PartSelect Number PS11755768
Manufacturer Part Number WPW10505748
This is a tub wheel assembly for your dishwasher. This assembly, complete with two rollers on a supporting bracket, supports the rack along the upper rail or track to allow the rack to slide smoothly. You may need to replace this if the rollers are broken or jammed. The part is gray in color and is made of plastic. You will need to remove your upper rack to install this replacement tub wheel assembly.
Your Price
$27.06
  In Stock
Upper Rack Wheel
★★★★★
★★★★★
(11)
PartSelect Number PS11748156
Manufacturer Part Number WPW10078214
Sold individually.
Installation Instructions
Rhonda from STATESVILLE, NC
Broken wheel upper rack
Pulled tip off wheel rack in slid broken wheel out slid new wheel in replaced plastic gray end of rack Read more...
Your Price
$7.46
  In Stock
White Dishrack Roller
★★★★★
★★★★★
(6)
PartSelect Number PS11746834
Manufacturer Part Number WP903093
This upper dishwasher dishrack roller, also known as a dishrack wheel, allows you to roll the dishwasher rack easily on the support rails. If your dishwasher rack is disconnected or the rack is broken, then replacing this part might be the solution. The first step in this repair is to remove the upper dishrack from the track, the next step is to remove the defective rack roller and replace it with the new one by sliding it onto the shaft and locking it in. No tools are required for this replacement and customers rate this project as easy. The roller is entirely made from plastic and is just over an inch in diameter.
Fixes these symptoms
Installation Instructions
Kathy from Lombard, IL
Rack roller broke
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks Read more...
Your Price
$39.18
  In Stock
Tub Wheel
★★★★★
★★★★★
(4)
PartSelect Number PS11748145
Manufacturer Part Number WPW10078083
When you order this part it is recommended that you order the gaskets as well - search by model#.
Installation Instructions
Mitchell from NEW ROCHELLE, NY
Lower wheel broke off upper wheel mount and dishrack wheel broke on the opposite side
Have all the tools at your disposal. Remove top rack after removing the track stop. Remove 2 screws that hold unit in to cabinet. They are under the little caps. That is when you need the magnet for the screwdriver. Wiggle tub out of space and remove hex head screws that hold the wheel mount. Save the gasket for install. Put things back the way they came off. Changing the upper dishrack requires some twisting and gentle pressure. Even if one is broken, replace all 4. Put back the screws to the cabinet and the end caps. Read more...

Related Parts