Jenn-Air Dishwasher Spray Arms | Replacement Parts & Accessories | PartSelect

Popular Jenn-Air Dishwasher Spray Arms

Your Price
$21.24
Spinner Kit
PartSelect Number PS972316
Manufacturer Part Number 8193983
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
paul from erie, CO says,

spinner kept falling off
i removed the top screw for the water input to the spinner, which gave me enough room to replace the worn nipple pin that the spinner snaps on to. then snapped the new spinner in place. and then screw...read more

Your Price
$4.87
Spray Arm Seal
PartSelect Number PS11745436
Manufacturer Part Number WP8268340
Also known as a wash arm seal.
Fixes these symptoms
Leaking
Noisy
Not cleaning dishes properly

See more...
Installation Instructions
Fred from Grafton, OH says,

Lower spray arm seal replacement
Remove upper tray and spray arm. Remove two screws retaining pipe for upper spray arm and overhead. Unscrew retainer on top of lower spray arm and remove. Gently rotate the upper feed pipe clockwise u...read more

Your Price
$24.86
Spray Arm
PartSelect Number PS11754873
Manufacturer Part Number WPW10448645
This is an upper spray arm for a dishwasher. While the appliance is in use, the spray arm rotates while water travels through it to distribute water evenly throughout the dishwasher tub. This ensures the dishes are efficiently and properly cleaned. It measures approximately 19 inches long and is grey in color.
Fixes these symptoms
Not cleaning dishes properly


Your Price
$36.89
Spray Arm
PartSelect Number PS11752757
Manufacturer Part Number WPW10320512
This is a replacement spray arm for your dishwasher. It is approximately 20 inches wide. This spray arm is made of gray plastic and is sold individually. The spray arm rotates and sprays water to clean your dishes. The spray arm can occasionally become clogged and damaged, and this can prevent your dishes from being cleaned properly. To replace the spray arm, turn clockwise to release, and attach the new arm by connecting it to the nozzle and turning counter clockwise. This is an authentic OEM part.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Installation Instructions
Wendy from LINCOLN, MA says,

I had cleaned the filter on my dishwasher and neglected to reattach the lower spray arm. It went through the next wash/dry cycle resting on a coil and was burned and deformed beyond being able to use it.
The new lower spray arm fit right into place. All set, and I will always check to see if it is sitting properly!...read more

Your Price
$31.30
Upper Spray Arm
PartSelect Number PS11752935
Manufacturer Part Number WPW10327455
The upper spray arm rotates and sprays water to clean the dishes inside the dishwasher tub. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. To check your spray arm, make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arm and check to ensure they are straight and undamaged. This spray arm is made of high-quality plastic and is just over 5 inches long.
Fixes these symptoms
Not cleaning dishes properly


Your Price
$67.19
Lower Spray Arm Hub - Gray
PartSelect Number PS11748138
Manufacturer Part Number WPW10077898
The lower spray arm hub sits inside the dishwasher at the base, and feeds water into the lower spray arm. The arm hub is made of plastic and measures 3 inches long by 1.5 inches wide. If the spray arm becomes loose, or does not spin freely, check for damage to the spray arm hub. This is a genuine OEM replacement part sourced directly from the manufacturer.
Fixes these symptoms
Not cleaning dishes properly


Your Price
$5.97
Upper Spray Arm Assembly
PartSelect Number PS11747612
Manufacturer Part Number WP99001586
The upper spray arm helps distribute water from the top of the dishwasher tub.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Alane from Piedmont, OK says,

spray arm would not stay on during wash
Removed old spray arm and spray arm nut with a twist of my fingers. Screwed in new spray nut with my hand, and snapped in the new spray arm. Works PERFECTLY! I did it all by myself! Saved me a cost...read more

Your Price
$5.94
Wash Arm Cap
PartSelect Number PS11747698
Manufacturer Part Number WP99002654
This part is the replacement wash arm cap, also known as the spray arm nut, for your dishwasher. It is made of white plastic and is approximately ½ an inch in diameter. The wash arm cap fastens the lower spray arm to the pump housing. If the arm cap is damaged or missing, the arm can wobble or fall off during operation, and this can make it extremely difficult to wash your dishes effectively. To replace the wash arm cap, simply remove it from the spray arm, and replace it with the new cap. This part is an authentic OEM part from the manufacturer, and is sold individually.
Fixes these symptoms
Noisy
Not cleaning dishes properly


Installation Instructions
CHRISTOPHER from Spalding, NE says,

Wash Quality Was Getting Bad
The upper arm was held in by a torx screw. The shoulder on the screw held the arm in place. Once removed I simply swapped parts and installed screw. The lower arm was held on by a plastic nut with...read more

Your Price
$44.68
Manifold
PartSelect Number PS11753224
Manufacturer Part Number WPW10340542
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Paula from ANDOVER, MA says,

rubber flaps on the end of the manifold were worn - no pressure
Ordered the "right" part according to the diagram. The part I received was about 1/4" too long so I couldn't use the whole manifold. Took the rubber end off and - fortunately- it fit the old manifold....read more

Your Price
$38.30
Lower Spray Arm Support
PartSelect Number PS11757605
Manufacturer Part Number WPY912900
This part is used to house the lower spray arm.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Martin from Campbell, CA says,

The spray arm support broke off when I forced the bottom drawer out. (the extending jet thing hadn't retracted.
Whoever manufactures this part, hope they read this and strenthen this part. The very thin legs break very easily.

I removed the threaded broken-off part from the extension thing. The spay ...read more