Inglis Range Hood Parts

Why Genuine OEM Matters

Shop By Appliance Type

Popular Inglis Range Hood Parts

Your Price

$41.14

Inglis Range Hood Grease Filter

PartSelect Number PS2372036

Manufacturer Part Number W10169961A

Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.

Installation Instructions

Anneliese from Sarasota, FL

Old grease filters were coming apart due to two tiny lost screws which had popped out. Tried to replace them at ACE Hardware and found nothing that tiny! Therefore just ordered replacement grease fikterd.

The only poroblem I had was finding the Model number. I entered WWW….instead of WVW (my eyesight and error??.Receiving the new filters was prompt! THANK YOU! Read more...

Range Hood Light Bulb – Part Number: WPW10571723

Your Price

$41.93

Inglis Range Hood Light Bulb

★★★★★

1 Review

PartSelect Number PS11756469

Manufacturer Part Number WPW10571723

This light bulb is compatible with different makes and models of microwaves, ranges and range vent hoods. This halogen light bulb is a genuine OEM part and is 120V and 40W. It is sold as an individual bulb. If you notice the light bulb is flickering, burnt out or dim, the bulb needs to be replaced. To replace the existing light bulb with this one, you will need to remove the previous light bulb and replace it with the new one.

Your Price

$36.70

Inglis Range Hood Light Bulb

★★★★★

1 Review

PartSelect Number PS11752340

Manufacturer Part Number WPW10298151

This genuine OEM halogen light bulb illuminates your stovetop, helping you see clearly while you are cooking. It is found beneath the range hood, above the stovetop or near the control panel, and is protected by a cover. It also has a power rating of 20 watts. If the bulb fails to turn on, appears blacked or shattered, it needs to be replaced. Otherwise, you will not be able to see your stovetop properly, making cooking more challenging. To replace the bulb, unclip the glass lens covering it using a flathead screwdriver. Gently remove the old bulb from its socket by moving it side to side. When installing the new bulb, it is recommended to wear gloves to avoid transferring oils onto it, which can cause hot spots and early failure. This bulb is sold individually and offers three dimmer settings.