Inglis Dryer Drums and Tubs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Inglis Dryer Drums and Tubs
Your Price
$52.33
In Stock
Inglis Dryer Drying Rack
Put the spring arm in first and the rack will fit in the front groove.
It would have been good if there had been a picture of the dryer arm attached to the dryer.
So I have 2 good racks and will return one if you tell me where to send it.
Keith Walden.. Read more...
PartSelect Number PS346849
Manufacturer Part Number 3406839
This dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits dryers that are 29 inches wide, have the letter "E" following the numbers in the model number, and whose dimples are four and a half inches apart in the back of the dryer drum.
Installation Instructions
Keith from Shawnee, KS
I had only seen a one piece rack .The 2 piece threw me for a loop.
I thought I had checked the arm piece of the rack real good for a product number on my original part but I missed the number till the 2nd box came in, and a looked real careful and realized it was the same as the order I thought was bad.Put the spring arm in first and the rack will fit in the front groove.
It would have been good if there had been a picture of the dryer arm attached to the dryer.
So I have 2 good racks and will return one if you tell me where to send it.
Keith Walden.. Read more...
Your Price
$49.95
In Stock
Inglis Dryer Drum Front Bearing Ring
PartSelect Number PS11741470
Manufacturer Part Number WP3394509
This part mounts to the front of the drum.
Fixes these symptoms
- Noisy
- See more...
Your Price
$34.95
In Stock
Inglis Dryer Drying Rack - Dimples 9.5" Apart
PartSelect Number PS346509
Manufacturer Part Number 3404351
This Whirlpool/Kenmore made dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits whirlpool made dryers that are 29 inches wide, have the letter "E" following the numbers in the model number, and whose dimples are nine and a half inches apart in the back of the dryer drum.
Installation Instructions
Robert from BLOOMINGTON, IL
I was sent a drying rack for my electric dryer
The drying rack sent matched the dimples,9.5 inches apart, but it was an inch and a half too long. The rack sent was 21 inches, I need a rack that is 19.5 inches long. So I returned it. At TWICE the cost of the rack itself. Still in search of a rack that will fit my dryer
Read more...
Your Price
$65.29
In Stock
Your Price
$61.95
In Stock
Inglis Dryer Tall Drum Baffle
PartSelect Number PS11743769
Manufacturer Part Number WP692490
Sold Individually - Appliance originally takes 2.
Installation Instructions
John from Santa Margarita, CA
Dryer belt worn out, rear seal worn replaced drum baffle
Unplugged unit and removed top and front of dryer. Removed drum and belt. noting how belt ran through the belt tension-er. Removed old felt seal from rear of drum. Replaced broken baffle, replaced rear seal. reinstalled belt. Put unit back together and test ran.
Read more...
Your Price
$61.95
In Stock
Inglis Dryer Drum Baffle
PartSelect Number PS11741750
Manufacturer Part Number WP342847
The drum baffle lifts and tumbles the clothes inside the drum as the drum rotates during the drying cycle.
Your Price
$56.95
In Stock
Inglis Dryer Drum Baffle - Short
PartSelect Number PS11741670
Manufacturer Part Number WP3403636
This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.
Your Price
$33.95
In Stock
Your Price
$137.69
Special Order
Your Price
$175.18
Special Order
Inglis Dryer Baffle (2) (with Steel Strip)
PartSelect Number PS1486220
Manufacturer Part Number 8183113