Husqvarna Pressure Washer Parts

Popular Husqvarna Pressure Washer Parts

Your Price
$9.62
   In Stock
Husqvarna Pressure Washer Valve, Fuel
PartSelect Number PS8916470
Manufacturer Part Number 209417GS
Your Price
$26.66
   In Stock
Husqvarna Pressure Washer Kit, Engine Mounting Hardware
PartSelect Number PS8912248
Manufacturer Part Number 195294GS
Your Price
$4.99
   In Stock
Husqvarna Pressure Washer Kit-retainer Clips
★★★★★
★★★★★
1 Review
PartSelect Number PS8907531
Manufacturer Part Number 195964GS
This set of 4 retaining clips comes as a package and each clip is made of durable plastic and measures 1.25-inches long and 0.375-inches wide. These clips are compatible with various makes and models of pressure washer and are used to secure various components to your equipment.?Check the user manual for your model for the exact placement of these clips, and ensure you are ordering the right amount of clips for your needs.
Installation Instructions
Edward from BANGOR, PA
The foward motor mounts both failed allowing the entire engine and pump to swing back
I loosened the rear motor mounts which protrude through slots in the frame using a 15mm open end allowing the engine to be moved enough to pass the front mounts through both the frame and the engine mounting holes. The upper bolts on the front mounts don't have enough clearance for a socket or box end and the open end gets less than a quarter turn at a time unless you remove the wheels. I just took my time and tightened the nuts being careful not to round the corners. The lower bolt/nuts present no problem. Read more...
Your Price
$27.40
   In Stock
Husqvarna Pressure Washer Kit, Chemical Inject
★★★★★
★★★★★
3 Reviews
PartSelect Number PS8911045
Manufacturer Part Number 192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers. If the cleaning solution will not dispense, it is possible that you need a new Chemical Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair. Customers rate this repair as Easy.
Installation Instructions
Carl from ARCADIA, FL
The copper fitting on the chemical injection broke.
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in backwards you pressure will fed directly into your chemical container!! Read more...
Your Price
$6.66
   In Stock
Husqvarna Pressure Washer Cap, Chemical Tank
PartSelect Number PS9940318
Manufacturer Part Number 312369GS
Your Price
$11.63
   In Stock
Husqvarna Pressure Washer Nozzle, Qc, White
★★★★★
★★★★★
2 Reviews
PartSelect Number PS8907533
Manufacturer Part Number 195983RGS
Your Price
$52.15
   In Stock
Husqvarna Pressure Washer Assembly, Extension
★★★★★
★★★★★
1 Review
PartSelect Number PS11829839
Manufacturer Part Number 706595
Your Price
$11.63
   In Stock
Husqvarna Pressure Washer Nozzle, Soap
PartSelect Number PS8911521
Manufacturer Part Number 198841GS
Your Price
$4.99
   In Stock
Husqvarna Pressure Washer Key
★★★★★
★★★★★
2 Reviews
PartSelect Number PS8928085
Manufacturer Part Number 23139GS
Designed for use in various models of pressure washers, air compressors, and generators, this Woodruff Key is used to hold a shaft with a mating part, such as a gear. It is 1 inch in length, made of metal, is silver, and is sold individually. If the mating shaft or gear no longer rotates together, you likely need to replace the Woodruff Key. Inspect it for signs of fatigue or wear, which occurs through regular use, and replace it if needed. You will need a wrench set, an allen key set, a screwdriver, and pliers to complete this repair. Customers rate this repair as Easy.
Your Price
$16.05
   In Stock
Husqvarna Pressure Washer Thermo Relief
PartSelect Number PS9270416
Manufacturer Part Number 208673GS
Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a kit or assembly, and is sold individually. When malfunctioning, the Thermo Relief Valve will open on a regular basis, which can cause damage to your pump. If it is opening often or on a regular basis, replace it to protect your pump from damage. You will need a socket set, a wrench set, and pliers to complete this repair. Customers rate this repair as Easy.

Husqvarna Pressure Washer Appliance Types

Related Husqvarna Pressure Washer Parts

Popular Husqvarna Pressure Washer Models

Below are the most popular Husqvarna Pressure Washer models we have. Enter your model number in the search box to find your model.