Husqvarna Pole Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husqvarna Pole Saw Parts
Your Price
$12.20
In Stock
Husqvarna Pole Saw Chainsaw Primer Bulb
PartSelect Number PS9282918
Manufacturer Part Number 503936601
Genuine Husqvarna replacement part, this part is sold individually. The 503939601 Air Purge does just what the part name says. It purges the air out of the carburetor. Then it forces fuel from the fuel tank and fuel line in to the carburetor.
Your Price
$6.40
In Stock
Husqvarna Pole Saw Fuel Tank Bushing
PartSelect Number PS11824288
Manufacturer Part Number 580457501
Used to seal the fuel tank to prevent leaks and allow the fuel line to enter through it, this Fuel Tank Bushing is sourced directly from the manufacturer. It is made of black rubber, is not part of a kit or assembly, and is sold individually.
This part will wear through regular use and should be replaced if you notice signs of damage or wear. When it malfunctions, you will see fuel leaking from the bushing. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Your Price
$6.40
In Stock
Husqvarna Pole Saw Trimmer Hose
PartSelect Number PS9020992
Manufacturer Part Number 537042401
This OEM fuel line, or hose, is a 4-inch, clear, plastic tube which is sold individually. It is rated as "Easy" to install. This part connects to the purge assembly and delivers fuel to the carburetor or is used as a return line to the tank. A broken hose will leak, and should be replaced. Refer to your make, model and diagrams to check if this part is right for you.
Your Price
$7.63
In Stock
Husqvarna Pole Saw Trimmer Oiled Air Filter
PartSelect Number PS9020811
Manufacturer Part Number 537186301
This ready-oiled air filter is an OEM part that traps dirt and debris, preventing them from entering the engine. This part is black, comprised of foam, and is sold individually. Your air filter may become dirty and clogged over time, and because it is oiled, it is difficult to wash because it is oiled, so it will need to be replaced. A clogged air filter will cause your engine to run rough from restricted air flow.
This is an easy repair to make and does not require any special tools.
Your Price
$63.74
In Stock
Husqvarna Pole Saw Carburetor
PartSelect Number PS11824881
Manufacturer Part Number 588171156
This OEM carburetor mixes the air-fuel mixture to the proper ratio for combustion in your engine. This carburetor is sold individually, is silver in color and metal in material, and is located on the intake of the engine.
Issues with your carburetor will cause problems with your engine running, and could cause excessive smoke due to too much gas. This can happen due to corrosion inside the carburetor. Carburetors can be rebuilt easily, and repairing them requires an allen wrench and a screwdriver. When troubleshooting your carb, remove the air filter and pour a teaspoon of fuel into the carburetor. Pull the starter rope, and if the engine starts then quickly dies, the carburetor is likely the problem.
When replacing your carburetor, also replace all gaskets when doing so, as they are a one-time use.
Installation Instructions
JAMES from FAYETTEVILLE, AR
Your Price
$19.88
In Stock
Husqvarna Pole Saw Fuel Hose
PartSelect Number PS17016374
Manufacturer Part Number 581756205
This fuel hose is a genuine OEM part designed to deliver fuel from your fuel tank to the carburetor. Also known as the fuel line, it is black in color, made of rubber, sold individually, and can be attached to your machine on the fuel tank and the carb. Over time, it is possible the line breaks due to wear or drying out.
If you notice cracks or leaking fuel, it is time to replace the fuel hose. This is an easy repair according to most of our customers, and does not require any special tools.
Your Price
$9.16
In Stock
Husqvarna Pole Saw Air Filter
PartSelect Number PS9022665
Manufacturer Part Number 537143101
This air filter comes in black foam and is rated as "Easy" to install. Installation requires a screwdriver, and the part attaches inside of the air cleaner housing. This manufacturer certified filter is used to prevent dirt and debris from entering the carburetor and engine, which would cause damage. If broken or clogged, the engine will experience performane issues or may not turn on. If broken, the filter should be replaced. Tip: Put a bit of two-cycle oil in the bag and let it absorb into the filter. This makes it more tacky to catch debris.
Your Price
$7.63
In Stock
Husqvarna Pole Saw Knob
PartSelect Number PS8993624
Manufacturer Part Number 502204001
The air cleaner knob, just over 1 inch in diameter, is black in color and made of plastic. It is sold individually, and its function is to tighten the air cleaner cover down on various lawn and garden equipment.
This knob can become worn over time, which will cause the air filter cover not to stay in place. Most of our customers find this to be an easy repair. It does not require any special tools.
Your Price
$34.75
In Stock
Husqvarna Pole Saw Trimmer Starter Pawl Bridge
PartSelect Number PS9282878
Manufacturer Part Number 503873305
The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue, the engine will not engaged when the rope is pulled, and the part should be replaced. Installation is rated as easy and requires a screwdrvier, pliers and nutdriver. Refer to your make, model and diagram to check if this part is correct. This part is metal, individually sold, and comes in gold.
Your Price
$10.70
In Stock
Husqvarna Pole Saw Chainsaw Pump Piston
PartSelect Number PS9028551
Manufacturer Part Number 540057901
It is a high-quality OEM item which is made for Husqvarna and Jonsered chainsaws. The piston is secured inside the cylinder in order to create pressure and push the oil. Over time due to friction and heat, it may wear out or even get damaged eventually requiring a replacement to maintain a properly working oil pump. Note, never use waste oil. This results in damage to the oil pump, the bar, and the chain. It is also important to use oil of the right grade (suitable viscosity range) in accordance with the air temperature. Make sure to refer to the owners manual and the appropriate diagrams of your model for the correct installation of the new part. You will need to use appropriate tools in order to remove the chain, the bar, and the sprocket in order to perform this repair. This pump piston is made of durable materials and is sold as an individual component. Keep in mind, other parts of the oiler mechanism are all sold separately.
Husqvarna Pole Saw Appliance Types
Related Husqvarna Pole Saw Parts
- Husqvarna Pole Saw Bearings
- Husqvarna Pole Saw Belts
- Husqvarna Pole Saw Brackets and Flanges
- Husqvarna Pole Saw Caps and Lids
- Husqvarna Pole Saw Carburetors
- Husqvarna Pole Saw Control Cables
- Husqvarna Pole Saw Exhausts
- Husqvarna Pole Saw Filters
- Husqvarna Pole Saw Gears
- Husqvarna Pole Saw Handles
- Husqvarna Pole Saw Hardware
- Husqvarna Pole Saw Hoses and Tubes
- Husqvarna Pole Saw Knobs
- Husqvarna Pole Saw Lights and Bulbs
- Husqvarna Pole Saw Manuals and Literature
- Husqvarna Pole Saw Pumps
- Husqvarna Pole Saw Seals and Gaskets
- Husqvarna Pole Saw Spark Plugs
- Husqvarna Pole Saw Springs and Shock Absorbers
- Husqvarna Pole Saw Starters
- Husqvarna Pole Saw Switches
- Husqvarna Pole Saw Tanks and Containers
- Husqvarna Pole Saw Transmissions and Clutches
- Husqvarna Pole Saw Valves
- Husqvarna Pole Saw Wheels and Rollers
Popular Husqvarna Pole Saw Models
Below are the most popular Husqvarna Pole Saw models we have. Enter your model number in the search box to find your model.
- 327PT5S 327 Pt5s (20120100001-Current)
- 327PT5S 327 Pt5s (20112300001-20120100000)
- 327PT5S Pruner
- 327PT5S Pruner
- 326P5X Pole Saw
- 326P5X 326 P5 X (2008-03)
- 326P5X Pole Saw
- 326P4 Supplemental Parts List, No Engine Parts
- 326P4 Pole Saw
- 326P4 Saw Attachment
- 326P4 326p 4 X-Series, 20013500001-20021799999
- 326P4 326 P4, 326 P4 X-Series, 326 P5 X-Series Saw Attachment (2002-05)
- 326P4 Pole Saw
- 326P4 Pole Saw
- 327P5X Polesaw
- 327P5X 327 P5 X (2008-03)
- 326 Pole Saw
- 326 Pole Saw
- 326 Pole Saw
- 326 Pole Saw