Husqvarna Lawn Mower Belts

Find Your Part

Model number locator Need help finding your model number?
PartSelect 25 Year
Husqvarna Appliance Parts
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Part Type

Popular Husqvarna Lawn Mower Belts

Your Price
$37.13
  On Order
Husqvarna Lawn Mower Belt
PartSelect Number PS16380739
Manufacturer Part Number 592855201
Installation Instructions
Daniel from WYTHEVILLE, VA
Husqvartna LGT-48DXL transmission drive belt was worn out
ALL VIDEOS and the official Husqvarna instructions will tell you that you MUST remove both the mowing deck and the entire clutch pulley assembly to switch the transmission drive belt. This is NOT true. It takes some effort and tight maneuvering, but this job can be done relatively quickly without removing either. You do NOT have to remove the mowing deck! You do NOT have to remove the clutch pulley assembly! What I did was to stand the tractor up nearly vertical, resting it against a golf cart I have and tying it in place for safety. Then, you have to loosen two black belt guides right by the clutch pulley assembly. I did NOT remove them, just left them hanging loose. Next, there is a silver bar that comes in from the outside of the mower chassis and attaches directly to the clutch, remove this entirely. Next, there is an electrical cord assembly in the way, trace this back, find where it plugs in, and unplug it. Next, in order to be able to slide the belt fully over the clutch pulley assembly, you have to take the mower deck belt off of JUST THE ONE spindle closest. I tie wrapped it in place after getting it off the spindle so that I could easily put it back onto the spindle as the last step when done. Once the mowing deck belt is off the closest spindle, you can then slide the drive belt completely over the clutch pulley assembly. You can then easily remove the entire drive belt, taking note (I took pictures) of how it is routed. Then, just reverse all of this. I began by fitting the drive belt over the clutch pulley assembly to make sure that end was correct. I then put the previously mentioned two guides, silver bar, and electrical cord back in place. Next, I shoved the belt down where it goes, working it down towards the transmission and routing it correctly. Of course, it is a little difficult with the limited space available, but I would rather do that then needlessly take the entire mowing deck off. You finally have to CAREFULLY slide it over the PLASTIC fan blades on the transmission. Once past those, it slides easily in place. The last step is to put the mowing deck belt that you previously removed and tie wrapped in place back onto the spindle. That's it! Only takes about 30-45 min. done this way. Read more...
Your Price
$46.41
  In Stock
Husqvarna Lawn Mower V-Belt
PartSelect Number PS9982769
Manufacturer Part Number 584453101
This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley assemblies to transfer power from the engine to the mower blades. Over time, it may become brittle and cracked, requiring replacement. You may need a wrench when replacing this part. This item is sold individually
Your Price
$37.13
  In Stock
Husqvarna Lawn Mower Belt
PartSelect Number PS17016841
Manufacturer Part Number 598559101
Belt
Installation Instructions
Steve from DAMASCUS, OR
Mower belt fell off was cut by the drive pulley.
Got the proper length and pulley size belt via serial number. Checked the length prior to ordering to assure the length would be correct.
Took mower onto a flat surface where I could get on both sides of the deck. And then placed the belt on the back pulleys first . Then I routed it through the idler pulleys to the power pulley where I turned the pulley with putting finger pressure against the belt as I turned the pulley. And it went on with no problem . It is that simple just be sure to turn the pulley and apply the belt in the same direction at the same time. Read more...
Your Price
$14.64
  In Stock
Husqvarna Lawn Mower Belt
PartSelect Number PS16370615
Manufacturer Part Number 580364609
Your Price
$17.43
  In Stock
Husqvarna Lawn Mower V-Belt
PartSelect Number PS9016821
Manufacturer Part Number 532196853
Your Price
$46.07
  In Stock
Husqvarna Lawn Mower V-Belt
PartSelect Number PS9011522
Manufacturer Part Number 532144959
Lawn mower deck belt. Width: 1/2 " Length: 95 1/2 ". If the blades do not rotate properly, this belt may be worn.
Your Price
$59.68
  In Stock
Husqvarna Lawn Mower Belt Drive Deck
PartSelect Number PS17016487
Manufacturer Part Number 593773401
Belt Drive Deck
Your Price
$17.23
  In Stock
Husqvarna Lawn Mower Belt
PartSelect Number PS16370616
Manufacturer Part Number 580364610
Your Price
$66.31
  In Stock
Husqvarna Lawn Mower Belt Drive 54
PartSelect Number PS11824864
Manufacturer Part Number 587686701
Installation Instructions
MATTHEW from PENNSBURG, PA
Right axle bent
Replacing belt with no problem. I've ordered the front right axle spindle assembly three times. This is from your parts list and you sent me the part and they did not work at all. Read more...
Your Price
$33.15
  In Stock
Husqvarna Lawn Mower Lawn Tractor Ground Drive Belt
PartSelect Number PS9288485
Manufacturer Part Number 539110411
(1/2 x 56-5/16-inch) This ground drive belt is for lawn tractors. Ground drive belt turns the transmission pulley to move the tractor. Wear work gloves to protect your hands when installing this part.

Related Husqvarna Lawn Mower Parts

Back to Top