General Electric Washer Latches

General Electric Appliance Parts
Shop By Part Type

Popular General Electric Washer Latches

Your Price
$4.01
  In Stock
Lid Lock Striker
★★★★★
★★★★★
(12)
PartSelect Number PS11729471
Manufacturer Part Number WH02X24399
Fixes these symptoms
  • Lid or door will not open
  • Lid or door won’t close
  • Will not agitate
  • See more...
Installation Instructions
Wiley from Wilson, NC
Wife pull up door when it was in lock mode
Lift up door removed lid lock with screwdriver installed new part Read more...
Your Price
$5.25
  In Stock
Door Strike
★★★★★
★★★★★
(7)
PartSelect Number PS266893
Manufacturer Part Number WE1X1192
The door strike for your dryer is mounted on the dryer door. It fits into the door latch and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.
Fixes these symptoms
Installation Instructions
robert from mount joy, PA
dryer door wont stay shut
pulled out door striker anddoor latch out with pliers and just pushed in new parts. works like new in under a min. Read more...
Your Price
$71.35
  In Stock
Door Latch Lid Lock
★★★★★
★★★★★
(5)
PartSelect Number PS3496878
Manufacturer Part Number WH44X10288
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a cycle or open your washer door. It is mostly black in color and made of plastic. This part measures approximately 3.75 by 3.5 inches.
Fixes these symptoms
Your Price
$112.81
  In Stock
Washer Door Lock
PartSelect Number PS2374322
Manufacturer Part Number WH10X10008
This door lock is for washers. Door lock prevents the washer door from opening during the wash cycle or spin cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Your Price
$5.50
  In Stock
Lid Switch Actuator
★★★★★
★★★★★
(1)
PartSelect Number PS271105
Manufacturer Part Number WH1X2734
This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.
Fixes these symptoms
  • Pumps but will not spin
  • Will not agitate
  • Will Not Start
  • See more...
Installation Instructions
Jeff from Blacklick, OH
Needed to replace a rusted washer lid
All the parts were delivered in 3 days, every part fit perfectly.

The on line parts service person was very helpful.

We saved hundreds of dollars!

Highly recommend.
Read more...
Your Price
$176.58
  In Stock
Door Lock Latch
★★★★★
★★★★★
(2)
PartSelect Number PS1021459
Manufacturer Part Number WH10X10006
Fixes these symptoms
  • Lid or door will not open
  • Lid or door won’t close
  • Will Not Start
  • See more...
Installation Instructions
Andrew from Dania, FL
Machine would not function
Removed the three screws behind the top panel and slide it back to remove. Removed control panel then the two lower screws on the front panel the spring around the front of the gasket and slid up the front assembly to remove. Door lock was on front panel held by 2 screws and then loosened clamp around back of gasket and the gasket removed easily. The installation was easy nothing special to do and the problem was solved. Read more...
Your Price
$23.50
  In Stock
Door Catch
★★★★★
★★★★★
(3)
PartSelect Number PS269392
Manufacturer Part Number WH10X10004
Sold individually.
Fixes these symptoms
Installation Instructions
Shelley from Huron, OH
Broken door latch
Super easy! Just unscrew and remove the old door catch using a standard philips head screwdriver, replace with new door catch, and tighten screws. Done! Next time, don't leave dog in laundry room with washer door open! ;) Thanks PartSelect for making your website really easy to use even for the mechanically challenged. Read more...
Your Price
$32.69
  In Stock
LOCK MODULE DOOR
PartSelect Number PS11721792
Manufacturer Part Number WH01X23494
Your Price
$12.03
  In Stock
DOOR PLUNGER
PartSelect Number PS1022282
Manufacturer Part Number WH01X10255
Fixes these symptoms
Installation Instructions
Elliot from North Port, FL
Washer door would not lock / run. It just beeped twice.
Unplug the washer power cord. Take the screws off at the top (behind the front panel). Take the bolts off at the back (just the ones at the top). Remove the top cover. I'm going on memory here... Take the dial / knob off the front. Make sure the bottom of the control panel is free so the it's lip does not block the front panel (where the door is at). There may be a couple more screws to free the control panel. Take the panel off the front of the bottom (just above the pedestal if applicable). Take the screws out at the corners of the front panel (where the door is at). Open the washer door and take out the screws to free the front panel. The front panel is also hooked on brackets, so you will need to slide it up a little bit to take it off. Be careful of the rubber seal, because it will still be attacked to door (you might want someone there to help hold it). You just need enough room to get that door lock latch outta there. Remove the screws holding the door lock latch, and pull it out of there just enough were you can disconnect the wires. Connect the new door lock latch, put it back in place and then put the screws back in. Remember the brackets on the front panel. Once you get that panel back in place, continue the re-assembly. As for the door plunger, there are only 2 screws holding it on the door side. Do everything slow and carefully, and it should work out ok. Read more...
Your Price
$2.54
  In Stock
STRIKER DOOR
PartSelect Number PS8756976
Manufacturer Part Number WH01X10731

Related Parts