General Electric Microwave Grilles and Kickplates
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos

Popular General Electric Microwave Grilles and Kickplates
Microwave Vent Grille
PartSelect Number PS11774030
Manufacturer Part Number WB34X25406
The Vent grille covers components inside the microwave while allowing airflow through the slats.
Vent Grille - Stainless Steel
PartSelect Number PS4704150
Manufacturer Part Number WB07X11385
This vent grille mounts on the top of the microwave above the door.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
RONALD from WESTLAKE VLG, CA
Plastic in vent grill deteriorated in six years causing vent grill to fall of microwave.
Removed vent grill and replaced with new product from PartSelect. Three screws attach vent grill to microwave housing. Very easy to do, but not satisfied with original parts on vent grill uses by General Electric. Microwave is above range model and vents to the outside.
Read more...
Vent Grille - White
PartSelect Number PS1021630
Manufacturer Part Number WB07X10968
This vent grille mounts on the top of the microwave above the door.NOTE*** Part is only available in white.
Installation Instructions
Kelly from Austn, TX
The door panel and grille vent are plastic and thay both cracked and fell apart due to cheap plastic parts from GE.
Removed the screws at the top of vent and took the vent off and then removed the door by lifting it off the hinge. I had to break the old plastic door frame to get it off, but since it was no good anyway it didnt matter. Then I put the glass in the new frame put the handle on it and snapped the frame on to the door and put it back on the door hinge and then put the new vent on and screwed it down and closed the door. Job was not to hard at all.
Read more...
Vent Grille
PartSelect Number PS651261
Manufacturer Part Number WB07X10530
This grille does NOT come with screws. This vent grille mounts on the top of the microwave above the door.
Installation Instructions
Donald from Bellingham, MA
Grill needed replacing - it literally fell apart
The grill is located on the top of the microwave - above the door. The plastic seems to have just deteriorated - the plastic around the screws just cracked. There was also another crack on the side of the grill assembly. The micrawave is fairly new (4 years old) and we don't use any harsh cleaners on the plastic grill because it has never required it. The unit is also vented to the outside - so it doesn't get exposed to alot of heat. To put on the new grill - it took 5 minutes, two small phillips head screws. My only question is why did the plastic just fall apart
Read more...
Vent Grille Assembly - Stainless
PartSelect Number PS229619
Manufacturer Part Number WB07X10476
This vent grille mounts on the top of the microwave above the door.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
Eric from Shiloh, IL
Grille assembly vent was cracked and would not stay in place nor would vent operate
By selecting the entire grille assembly vs buying just the individual parts it made the replacement simple. Just had to remove 2 screws from the old assembly to remove. The new assembly popped right in and fastened it with the 2 old screws. I would recommend purchasing the entire grille assembly vs. just the individula parts if the plastic is cracked and brittle. The price difference was not that significant.
Read more...
Vent Grille - Black
PartSelect Number PS1020368
Manufacturer Part Number WB07X10967
This vent grille mounts on the top of the microwave above the door.
Installation Instructions
Janice M from Ft. Collins, CO
GRILLE VENT - Black
I could only replace the left screw because the right didn’t align properly. The grill fits tightly so I’m not worried about the one side. Read more...
PartSelect Number PS1480862
Manufacturer Part Number WB07X11009
Installation Instructions
Angela from LAUREL, MD
Grill vent broke
Fairly easy to repair. The hardest part for me was trying to get the lip under the frame so it will snap in. I could only replace the left screw because the right didn’t align properly. The grill fits tightly so I’m not worried about the one side. Read more...
Vent Grille - Stainless Steel
PartSelect Number PS2353406
Manufacturer Part Number WB07X11150
Installation Instructions
Laurence from Frederick, MD
Vent Grille - Stainless
PartSelect Number PS5135597
Manufacturer Part Number WB07X11392
This vent grille mounts on the top of the microwave above the door.
Installation Instructions
Lisa from FRESNO, CA
The prior grill fell off and dented my microwave it's 5 yrs old.
Place the clips in proper area and it just clipped on. There are holes for screws but none came with it and I none in my prior grill. You would think that would help hold it up there. Hmmmm
Read more...
Related Parts
- All General Electric Microwave parts
- General Electric Microwave Brackets and Flanges
- General Electric Microwave Caps and Lids
- General Electric Microwave Circuit Boards and Touch Pads
- General Electric Microwave Doors
- General Electric Microwave Ducts and Vents
- General Electric Microwave Electronics
- General Electric Microwave Fans and Blowers
- General Electric Microwave Filters
- General Electric Microwave Fuses
- General Electric Microwave Glass Tray and Supports
- General Electric Microwave Grates
- General Electric Microwave Handles
- General Electric Microwave Hardware
- General Electric Microwave Knobs
- General Electric Microwave Latches
- General Electric Microwave Legs and Feet
- General Electric Microwave Lights and Bulbs
- General Electric Microwave Motors
- General Electric Microwave Panels
- General Electric Microwave Power Cords
- General Electric Microwave Racks
- General Electric Microwave Springs and Shock Absorbers
- General Electric Microwave Switches
- General Electric Microwave Thermostats
- General Electric Microwave Transformers
- General Electric Microwave Trays and Shelves
- General Electric Microwave Wheels and Rollers