General Electric Microwave Grates

Your Price

$76.75

General Electric Microwave Vent Grille

★★★★★

7 Reviews

PartSelect Number PS1020368

Manufacturer Part Number WB07X10967

This vent grille mounts on the top of the microwave above the door.

Installation Instructions

Janice M from Ft. Collins, CO

Had a broken Grill-Vent

Put in two screws! Read more...

Your Price

$111.10

General Electric Microwave Vent Grille

★★★★★

12 Reviews

PartSelect Number PS651261

Manufacturer Part Number WB07X10530

This grille does NOT come with screws. This vent grille mounts on the top of the microwave above the door.

Installation Instructions

Donald from Bellingham, MA

Grill needed replacing - it literally fell apart

The grill is located on the top of the microwave - above the door. The plastic seems to have just deteriorated - the plastic around the screws just cracked. There was also another crack on the side of the grill assembly. The micrawave is fairly new (4 years old) and we don't use any harsh cleaners on the plastic grill because it has never required it. The unit is also vented to the outside - so it doesn't get exposed to alot of heat. To put on the new grill - it took 5 minutes, two small phillips head screws. My only question is why did the plastic just fall apart Read more...

Your Price

$170.01

General Electric Microwave Vent Grille Assembly (stainless)

★★★★★

9 Reviews

PartSelect Number PS229619

Manufacturer Part Number WB07X10476

This vent grille mounts on the top of the microwave above the door.

Fixes these symptoms

Door not closing properly
See more...

Installation Instructions

Eric from Shiloh, IL

Grille assembly vent was cracked and would not stay in place nor would vent operate

By selecting the entire grille assembly vs buying just the individual parts it made the replacement simple. Just had to remove 2 screws from the old assembly to remove. The new assembly popped right in and fastened it with the 2 old screws. I would recommend purchasing the entire grille assembly vs. just the individula parts if the plastic is cracked and brittle. The price difference was not that significant. Read more...

Your Price

$115.15

General Electric Microwave Vent Grille - Stainless

★★★★★

7 Reviews

PartSelect Number PS5135597

Manufacturer Part Number WB07X11392

This vent grille mounts on the top of the microwave above the door.

Installation Instructions

Lisa from FRESNO, CA

The prior grill fell off and dented my microwave it's 5 yrs old.

Place the clips in proper area and it just clipped on. There are holes for screws but none came with it and I none in my prior grill. You would think that would help hold it up there. Hmmmm Read more...

Your Price

$115.15

General Electric Microwave Vent Grille

★★★★★

1 Review

PartSelect Number PS752092

Manufacturer Part Number WB07X10525

This black vent grille mounts on the top of the microwave above the door. Screws are NOT included.

Installation Instructions

Scott from Mercerville, NJ

Grill was cracked and Filter was wearing Out

First I removed the old air/grease filter from the exhaust fan. It get washed monthly, so after several years of use, it was time to replace it. Once the old filter was removed, I opend the new filter package, slide the new filter into the filter slot from left to right. Once in all the way, I slide it back to the right to set it completely.

Second I began work on the cracked grill. I removed the phillips head screw on the left side of the grill, then removed the phillips head screw on the right side of the grill. I pulled the old grill off straight out. I opened the new grill package. I started to install the new grill by insert the bottom part first, then insert the top tabs and guide second, make sure I pushed slightly on the grill so it seated top and bottom at the same time. I installed both phillips head screws, left and right side, and completed the job. Read more...

Your Price

$41.53

General Electric Microwave Vent Grille Bisque

★★★★★

3 Reviews

PartSelect Number PS1018782

Manufacturer Part Number WB07X10969

This vent grille mounts on the top of the microwave above the door.

Installation Instructions

Alicia from ORANGE, CA

I had broken the clips that hold the vent in while cleaning it.

I ordered the part from this site (which was a little lower cost than another site but was described as a genuine GE part), and I looked up the instructions in my manual. It took about a week to get the new grille. There are 2 philips head screws attaching the grille. Just remove the screws, discard the old grille and put in the new grille with the same screws. The description on-line calls it a snap on grill which is a little misleading. It is attached with screws. I was fearful that it would not fit but it is identical to the old one. I am very pleased I did not have to replace the microwave even though it is 11 years old, it works. Read more...

Your Price

$124.40

General Electric Microwave Vent Grille Frame

★★★★★

2 Reviews

PartSelect Number PS229618

Manufacturer Part Number WB07X10475

Grille cover is sold separately.

Fixes these symptoms

Door not closing properly
See more...

Installation Instructions

STANLEY from SANDOWN, NH

Grille broke in several places

Removed two screws then took off decorative panel. Put hinges on and attached springs, mounting decorative panel onto the grille. placed back in unit and replaced two screws, viola! Read more...