General Electric Microwave Ducts and Vents
Popular General Electric Microwave Ducts and Vents
General Electric Microwave Air Duct Bracket
PartSelect Number PS3523851
Manufacturer Part Number 4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, and replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.
General Electric Microwave Damper
PartSelect Number PS3524148
Manufacturer Part Number 4900W1A001B
This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow air to vent away from the microwave. This vent damper door measures approximately 10 inches long x 3 inches wide and fits LG microwaves.
Installation Instructions
Rene from MORENO VALLEY, CA
Wanted to see the instructions before I install it.
Wanted to see the instructions before I install it.
Read more...
General Electric Microwave Damper
Georgia westchester ohio Read more...
PartSelect Number PS952387
Manufacturer Part Number WB06X10565
This vent damper is a manufacturer-approved replacement part for your above-range microwave. This part helps vent air from the microwave to the exterior of your home, and helps keep exterior wind out of the vent. Replacing the vent damper will require some disassembly of your microwave/ Unplug the unit before beginning work on it.
Installation Instructions
Georgia from West Chester, OH
I needed a bracket to install my microwave
I wasn't sure which parts I needed.We searched several web sites until we found yours.I was real pleased with the service. My parts where delivered in a timely manner. Everything I needed to install my microwave was in my order. Thank you for the service. Georgia westchester ohio Read more...
General Electric Microwave Hood Damper Assembly
PartSelect Number PS651224
Manufacturer Part Number WB06X10436
General Electric Microwave Vent Damper
PartSelect Number PS8767001
Manufacturer Part Number WB06X10935
The vent damper attaches to the outer cabinet and directs airflow through the vent duct.
General Electric Microwave Assembly HOOD DAMPER
PartSelect Number PS6447600
Manufacturer Part Number WB06X10920
Related General Electric Microwave Parts
- All General Electric Microwave parts
- General Electric Microwave Brackets and Flanges
- General Electric Microwave Caps and Lids
- General Electric Microwave Circuit Boards and Touch Pads
- General Electric Microwave Doors
- General Electric Microwave Electronics
- General Electric Microwave Fans and Blowers
- General Electric Microwave Filters
- General Electric Microwave Fuses
- General Electric Microwave Glass Tray and Supports
- General Electric Microwave Grates
- General Electric Microwave Grilles and Kickplates
- General Electric Microwave Handles
- General Electric Microwave Hardware
- General Electric Microwave Knobs
- General Electric Microwave Latches
- General Electric Microwave Legs and Feet
- General Electric Microwave Lights and Bulbs
- General Electric Microwave Motors
- General Electric Microwave Panels
- General Electric Microwave Power Cords
- General Electric Microwave Racks
- General Electric Microwave Springs and Shock Absorbers
- General Electric Microwave Switches
- General Electric Microwave Thermostats
- General Electric Microwave Transformers
- General Electric Microwave Trays and Shelves
- General Electric Microwave Wheels and Rollers