General Electric Dryer Motors

Your Price

$144.39

General Electric Dryer Parts Assembly Motor

★★★★★

8 Reviews

PartSelect Number PS16878109

Manufacturer Part Number AGM30061302

Fixes these symptoms

Not Heating
See more...

Installation Instructions

Sheryl from SPRINGFIELD, MO

Dryer not heating

I followed video instruction in disassembling and set screws from each section into diferent small bowls in the order they were removed. Hardest part was some of the screws were really hard to get loose without stripping them and my control panel did not match video but I figured it out. Replacing the parts were easy and putting it back together. While it was apart I cleaned everything including fan blower wheel. Thanks for the right parts and your online video. With your help and a prayer this 62 year old woman fixed the problem and dryer runs like new. Read more...

Your Price

$95.01

General Electric Dryer Motor Drive

PartSelect Number PS16619247

Manufacturer Part Number WH03X32157

Videos!

Your Price

$247.43

General Electric Dryer Drive Motor

★★★★★

4 Reviews

PartSelect Number PS3523290

Manufacturer Part Number 4681EL1008A

This motor works with the belt to drive your dryer's drum.

Installation Instructions

Kevin from MASHPEE, MA

I would turn on the dryer it would run for about 10-20 seconds and then shutoff, and could smell something burning

There’s all sorts of videos on it I watched. It was actually very simple Read more...

Your Price

$157.12

General Electric Dryer Drive Motor And Pulley

★★★★★

2 Reviews

PartSelect Number PS11699355

Manufacturer Part Number WE17X22217

Your Price

$146.25

General Electric Dryer Drive Motor

PartSelect Number PS12743452

Manufacturer Part Number WE49X28295

Videos!

Your Price

$149.10

General Electric Dryer Drive Motor

★★★★★

1 Review

PartSelect Number PS1559768

Manufacturer Part Number WE17X10010

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Owen from Virginia Beach, VA

Dryer made excessively loud noise when running.

I initially opened the front of the dryer and noticed that the drum slides that the drum rides on in the front of the dryer were excessively worn. I then removed the drum and noticed that the plastic bearing that supported the drum in the rear was cracked and the washer(?) appered to be disintigrating. I ordered and replaced the drum slides and rear bearing. The dryer was still making too much noise. I ran the motor with the drum removed and realized that they motor was the remaining source of the excessive noise. I then ordered and replaced the motor with a new one and this solved the problem. Total cost was around $140. Note that when ordering a new motor, the instructions on the web site indicate that you need to order the motor pulley if your existing motor has a pressed on pulley. The new motor was a kit that came with the pulley included, and therefore the additional part was not needed, and had to be returned. The instructional videos and parts schematics on the web site were very helpful. Read more...