General Electric Dishwasher Wheels and Rollers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Dishwasher Wheels and Rollers
Your Price
$12.95
In Stock
General Electric Dishwasher Lower Rack Roller
PartSelect Number PS16217024
Manufacturer Part Number WD12X26146
The lower rack roller supports the smooth sliding of your dishwasher’s bottom rack. Measuring 1.5 inches in diameter and charcoal-colored, this OEM replacement part is sold individually. Replace all four rollers at once for consistent performance. Wear gloves during installation.
Installation Instructions
Dennis from CICERO, IN
Your Price
$12.95
In Stock
General Electric Dishwasher Lower Rack Roller & Stud Assembly
PartSelect Number PS16618942
Manufacturer Part Number WD12X27747
Introducing the GE Lower Rack Roller and Stud Assembly, an essential component for your dishwasher. This well-crafted assembly is designed to assist your dishwasher's lower rack in smooth and efficient movement for optimal loading and unloading. Built for durability, this GE assembly ensures consistent and reliable operation, enhancing your dishwasher's longevity. Embrace superior quality and worry-free dishwashing with this essential GE appliance part. Dive into an improved dishwashing experience with GE's commitment to innovation and reliability.
Your Price
$46.95
In Stock
General Electric Dishwasher Lower Rack Wheel Kit 8 Pack
PartSelect Number PS11726733
Manufacturer Part Number WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishes are not cleaning properly, you might need to replace one or more of the wheels. Each wheel and axle are made of plastic, and fit into one another so they can be clipped on to the lower dishwasher rack. Many of our customers found this repair to be quick and easy, and the only tool you should need to complete the repair is a pair of pliers.
Fixes these symptoms
- Door won’t close
- Leaking
- Noisy
- See more...
Installation Instructions
Mark from Huntingdon Valley, PA
Lower rack wheel was melted
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
Read more...
Your Price
$13.95
In Stock
General Electric Dishwasher Lower Rack Wheel And Stud
PartSelect Number PS1481883
Manufacturer Part Number WD12X10231
This genuine OEM lower stud and roller assembly is designed specifically for GE dishwashers, providing a direct replacement for a missing or faulty component originally installed on the unit. The roller attaches to the lower dishrack, allowing it to glide smoothly in and out for easy loading and unloading.
Made from durable plastic, this part is built to withstand regular use and is sold individually. Installation is quick and tool-free—simply press the roller assembly onto the designated spot on the dishrack. For proper placement and compatibility, refer to your model’s parts diagram or user manual.
Restore smooth rack movement and maintain your dishwasher’s performance with this reliable, manufacturer-sourced replacement part.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Christina from Canton, GA
Wheels had come off and were broken
We ordered a whole new set for the lower rack and even though they were smaller than the original ones, we replaced them all and now the rack slides in and out of the dishwasher with ease!
Read more...
Your Price
$29.95
In Stock
General Electric Dishwasher Upper Roller And Axle Kit Of 4
guides. Read more...
PartSelect Number PS3486910
Manufacturer Part Number WD12X10327
The dishwasher roller assembly attaches to the upper dishrack. It allows the dishrack to slide out easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the door makes noises, and/or dishes are not cleaning properly, it is best to replace it for more security. A flat-blade screwdriver is the only tool needed for this installation. Slide open the upper dishwasher rack and remove the retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it, and replace the rollers. Remember to put back the tabs on each side before sliding it back in. Make sure the dishwasher is turned off before starting this repair.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Noisy
- See more...
Installation Instructions
Carl from Fairfield, TX
The rollers on the upper rack broke
There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece then slide the rollers out. Place two new rollers in the rail and put the plastic end piece on. Use the hammer and punch to bend the metal clip back into place. Snap the rails on the rack and set the rack on the guides in the dishwasher. Replace the top guide using the screwdriver, you will have to twist the rails in order get them in between the guides. Read more...
Your Price
$46.95
In Stock
General Electric Dishwasher Dishrack Rollers And Axles Kit Of 8
PartSelect Number PS11725221
Manufacturer Part Number WD35X21041
If you are having trouble rolling your dish rack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Replace the parts if the rollers or their axles are damaged. These rollers attach to the dish rack allowing the rack to roll in and out with ease. This pack includes 8 gray rollers measuring at approximately 1.75 inches L x 0.75 inches W x 1.75 inches H. Each roller comes with an axle.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
Eric from Fort Mill, SC
Weak axles on the bottom rack wheels on GE dishwasher.
Simplest job ever. Ordered wheel and axles and when arrived pushed in the axle on the rear of the wheel and pushed onto the rack. Took less than one minute and working fine since.
Read more...
Your Price
$16.95
In Stock
General Electric Dishwasher Wheel Stud Assembly Lower Rack
PartSelect Number PS12582705
Manufacturer Part Number WD12X24712
This GE WHEEL STUD ASM LOWER RACK is a high-quality product specially designed for your GE appliances. Constructed with durable materials, this wheel stud assembly provides efficient functionality to the lower rack of your appliance. Perfect for routine maintenance or as a replacement part, it is engineered with precision to ensure a perfect fit. Step up your appliance game and enhance your kitchen efficiency with this essential component from GE. Trust in the reliability of GE for a smoothly running dishwasher. Upgrade your appliance today for long-lasting performance.
Your Price
$13.95
In Stock
General Electric Dishwasher Roller Rack
PartSelect Number PS16554615
Manufacturer Part Number WD12X27578
Introducing a quality standard rack roller from the trusted brand GE. This part is a reliable addition to your appliance requirement and crafted especially for impeccable performance. As a component of a dishwasher, this rack roller ensures smooth operation, improving the overall efficiency of your appliance. Build with precision and designed for durability, it is made to withstand the rigorous everyday use. Trust the experts at GE with your requirements, and make your appliance work like a pro. Bring home this robust, high-performing rack roller today.
Your Price
$13.95
In Stock
General Electric Dishwasher Roller And Bracket Assembly
PartSelect Number PS11772007
Manufacturer Part Number WD30X22347
Your Price
$46.95
In Stock
General Electric Dishwasher Upper Rack Wheel
PartSelect Number PS11721505
Manufacturer Part Number WD35X20994
This is a kit of 4 which includes the wheels and axels.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Joseph from Haymarket, VA
Worn/broken plastic parts were causing misery
Order arrived two days after being placed. Super easy to remove the old, worn, broken plastic parts and replace with new. Everything popped right on just as shown in the diagram. Our happiness with our dishwasher has increased 100%. BTW, thanks to the very helpful, friendly and knowledgeable staff at PartSelect.com -- next job, replace the ice maker in the freezer!
Read more...
Related General Electric Dishwasher Parts
- All General Electric Dishwasher parts
- General Electric Dishwasher Brackets and Flanges
- General Electric Dishwasher Caps and Lids
- General Electric Dishwasher Circuit Boards and Touch Pads
- General Electric Dishwasher Dishracks
- General Electric Dishwasher Dispensers
- General Electric Dishwasher Doors
- General Electric Dishwasher Filters
- General Electric Dishwasher Grilles and Kickplates
- General Electric Dishwasher Handles
- General Electric Dishwasher Hardware
- General Electric Dishwasher Hinges
- General Electric Dishwasher Hoses and Tubes
- General Electric Dishwasher Insulations
- General Electric Dishwasher Knobs
- General Electric Dishwasher Latches
- General Electric Dishwasher Motors
- General Electric Dishwasher Panels
- General Electric Dishwasher Pumps
- General Electric Dishwasher Racks
- General Electric Dishwasher Seals and Gaskets
- General Electric Dishwasher Spray Arms
- General Electric Dishwasher Springs and Shock Absorbers
- General Electric Dishwasher Switches
- General Electric Dishwasher Timers
- General Electric Dishwasher Trims
- General Electric Dishwasher Valves