GE Trash Compactor Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular GE Trash Compactor Parts
Your Price
$21.95
In Stock
General Electric Trash Compactor Power Nut Assembly
PartSelect Number PS16554596
Manufacturer Part Number WC02X20287
This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige, and roughly 3 inches wide, and almost 2 inches long. For this repair, you will need a screwdriver set or a multi-screwdriver, a quarter-inch nut driver bit, and a flat-head bit. You will need to get inside of your trash compactor in order to replace this part. This means uninstalling your appliance from your cabinets.
Fixes these symptoms
- Compactor ram gets stuck
- See more...
Installation Instructions
john from joplin, MO
plastic nut was stripped
replaced drive nuts only problems i had was to adjust shutoff switch
Read more...
Your Price
$20.95
In Stock
General Electric Trash Compactor Frame Roller Assembly
PartSelect Number PS12716561
Manufacturer Part Number WC17X20084
Introducing the robust GE Frame Roller Assembly, a must-have for maintaining the smooth operation of your trash compactors. This high-grade assembly conveniently attaches to the compactor?s lower frame, facilitating effortless sliding of the container drawer in and out. Before any installation task, ensure to unplug the compactor to ensure your safety. It's also advised to wear work gloves to protect your hands during the process. The GE Frame Roller Assembly exemplifies durability and efficiency, boosting the productivity and lifespan of your appliance. Rely on GE for your home appliance maintenance necessities.
Fixes these symptoms
- Drawer is hard to open and or close
- See more...
Your Price
$18.95
In Stock
General Electric Trash Compactor Drawer Roller Assembly
PartSelect Number PS16591421
Manufacturer Part Number WC01X20232
The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.
Fixes these symptoms
- Drawer is hard to open and or close
- See more...
Your Price
$17.95
In Stock
General Electric Trash Compactor Return Switch
PartSelect Number PS16542383
Manufacturer Part Number WC21X20249
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is not completing the compact cycle properly, you may have to test the switch. If you have a multimeter, you can perform a continuity test before ordering this part to determine if a continuous electrical path is present in the switch. If there is no electrical path in your switch, you will need to replace it. This is an authentic replacement part sourced directly from the original manufacturer.
Fixes these symptoms
- Doesn’t stop at end of compacting cycle
- Won’t stay on
- See more...
Installation Instructions
Brian from HOUSTON, TX
Trash compactor would not shut off at end of cycle. Would have to manually turn it off.
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor worked fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
Read more...
Your Price
$24.95
In Stock
General Electric Trash Compactor Bags (15 Pack)
I quest I will have to try these all plastic bags. I hope they are strong enough and work properly. Read more...
PartSelect Number PS1964579
Manufacturer Part Number W10165295RP
Trash compactor bags are a practical way to discard your waste. Due to the extreme pressure of the compactor, trash compactor bags designed to handle the force are necessary. These bags are made from tough 2.5-millimeter, multi-laminate plastic, and the patented Slip-Grip design prevents the bag from slipping into the compactor bin. They measure approximately 15 inches wide x 15 inches high and are made from 50 percent post-consumer recycled plastic. This pack of 15 trash compactor bags is a genuine OEM replacement part, and will fit most rectangular 15-inch trash compactors.
Installation Instructions
Sherry from SALEM, NY
Paper & Plastic 15” Compactor Bags not available
I have always used compactor bags made of paper & plastic. I was sent bags made of only plastic. I called and was told that is the only kind available. I am concerned that the plastic bags may not be strong enough.I quest I will have to try these all plastic bags. I hope they are strong enough and work properly. Read more...
Your Price
$52.87
In Stock
General Electric Trash Compactor 15 Inch Plastic Compactor Bags (60 Pack)
PartSelect Number PS1964577
Manufacturer Part Number W10165294RB
This is a 60-pack of plastic compactor bags. These bags are 15 inches wide, 3 millimeters thick and are white in color. The 3-millimeter thickness makes the bags more durable and helps prevent tearing. They are an environmentally-conscious product that are made of 50% post-consumer recycled material. The bags feature a Slip-N-Grip design that prevents the bag from slipping down into the compactor. Strong resin that is incorporated into the material increases puncture and tear resistance to help keep your trash in the bag. These bags will fit 15-inch rectangular compactors.
Your Price
$40.95
In Stock
General Electric Trash Compactor Plastic Compactor Bags - 15 Pack
PartSelect Number PS312032
Manufacturer Part Number WX60X1
Fits round or rectangular compactors.
Your Price
$44.95
In Stock
General Electric Trash Compactor Power Nut Kit
PartSelect Number PS11747554
Manufacturer Part Number WP9870163
Includes everything pictured above.
Fixes these symptoms
- Compactor ram gets stuck
- Noisy
- See more...
Installation Instructions
Tim from Bigfork, MT
locking nut was stripped
After calling a repair man and being told my appliance was to old for him to repair I discovered your website. I simply entered the model number and a picture of the part I was looking for was easily found. I ordered online and received the replacement parts 5 day's later. I simply swapped out the old locking nuts with the new ones from your website and the repair was complete. What could have been an easy $100 repair cost a fraction of that and the trash compactor is working just fine.
Read more...
Your Price
$47.95
In Stock
General Electric Trash Compactor Compactor Bags - 10 Pk
PartSelect Number PS257999
Manufacturer Part Number WC60X5015
The compactor bag is used in a trash compactor, where trash is compressed. This bag is made of a stronger plastic material so that it is able to contain a large amount of trash. It is also strong enough to compress trash as it gets pushed without easily tearing. The external bag surface grips to prevent the bag from slipping into the compactor and the interior of the bag is slippery, to compress trash easily. Refer to the manual provided by the manufacturer for any installation instructions or guidance.
Your Price
$18.95
Special Order
General Electric Trash Compactor Door Tilt Switch
PartSelect Number PS16591443
Manufacturer Part Number WC21X20268
General Electric Trash Compactor Appliance Types
Popular General Electric Trash Compactor Models
Below are the most popular General Electric Trash Compactor models we have. Enter your model number in the search box to find your model.