GE Range Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
General Electric Appliance Parts
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Appliance Type Shop By Part Type

Popular GE Range Parts

Range Surface Element Control Switch – Part Number: WB24X25013
20% OFF
Your Price
$37.42
$46.78
   In Stock
General Electric Range Surface Element Control Switch
★★★★★
★★★★★
53 Reviews
PartSelect Number PS11729102
Manufacturer Part Number WB24X25013
The control switch turns the surface element on and off and controls how much heat the element produces.
Fixes these symptoms
Installation Instructions
Mary from KISSIMMEE, FL
Right front heating element was either off or on high, no in between
Unplug range and pull it out to access the back. Pull knob off bad control at front making sure to check the orientation of the rod the knob goes on—it matters—and remove two brass screws. Then remove the four hex screws holding the top metal panel on at the back of the range (two have washers) and lift the panel off to expose the controls. (I then took a photo of the switch in situ to remember its orientation and how the wires were connected.) Use pliers to remove wires, then connect up and install the new switch, and put the brass screws back in at front to hold it in place. I used the pliers to turn the rod to the correct orientation before putting the knob back on. Reinstall the back panel with four hex screws. Plug the range in and test.

FYI the directions for accessing the infinite switch that came with the range also had me remove two screws under each side of the front of the control panel, but as far as I could tell that wasn’t necessary. Read more...
Light Bulb - 40W – Part Number: 40A15
Your Price
$10.98
   In Stock
General Electric Range Light Bulb - 40w
★★★★★
★★★★★
10 Reviews
PartSelect Number PS217532
Manufacturer Part Number 40A15
This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.
Installation Instructions
J. Douglas from Grass Valley, CA
Broken plastic parts
Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers. Read more...
Burner Bowl - 6 Inch – Part Number: WB31K10265
Your Price
$10.06
   In Stock
General Electric Range Burner Bowl - 6 Inch
★★★★★
★★★★★
19 Reviews
PartSelect Number PS8754845
Manufacturer Part Number WB31K10265
This 6" chrome drip bowl is sold individually.
Installation Instructions
Angelo from Duson, LA
Terminal block and 8" element shorted
Unpluged range. Removed back cover to access the infinite switches . removed old burner and drip pan. removed terminal block and retaining screw on cooktop. removed terminal block wiring from infinite switch taking care to mind were the wires came from. Install new terminal block and reattached to cooktop . installed new 8" burner and drip pan reinstalled back panel and plug in electrical to unit . tested burner . replaced stove after verifying burner worked Read more...
Chrome Burner Bowl - 8 Inch – Part Number: WB31K10266
Your Price
$13.92
   In Stock
General Electric Range Chrome Burner Bowl - 8 Inch
★★★★★
★★★★★
19 Reviews
PartSelect Number PS8754846
Manufacturer Part Number WB31K10266
This burner drip bowl, also referred to as a drip pan or burner pan, is a genuine OEM replacement part that is designed to fit ranges. The bowl is located beneath the burner where it catches food particles and other items that may fall during the cooking process. It prevents these substances from making contact with and potentially damaging the burner or cooktop surface. Each bowl has a diameter of 8 inches. It also comes with a chrome finish that gives the bowl a sleek and modern appearance, helps to protect the bowl from corrosion, and makes it easier to wipe off spills and drips.
Installation Instructions
Angelo from Duson, LA
Terminal block and 8" element shorted
Unpluged range. Removed back cover to access the infinite switches . removed old burner and drip pan. removed terminal block and retaining screw on cooktop. removed terminal block wiring from infinite switch taking care to mind were the wires came from. Install new terminal block and reattached to cooktop . installed new 8" burner and drip pan reinstalled back panel and plug in electrical to unit . tested burner . replaced stove after verifying burner worked Read more...
Drip Bowl - 6 Inch – Part Number: WB31T10010
Your Price
$18.15
   In Stock
General Electric Range Drip Bowl - 6 Inch
★★★★★
★★★★★
63 Reviews
PartSelect Number PS244394
Manufacturer Part Number WB31T10010
This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This authentic manufacturer-approved part is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rusted, this replacement can solve it. First, remove the element from the stove top, and pull out the old drip pan. Insert the new bowl and make sure it is aligned to where the element is plugged in. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part. This part is sold individually, if you are replacing more than one drip bowl on your stove at once, you will need to account for this. To replace, simply pull the old surface elements and burner bowls off, give everything a thorough clean, and install the new parts with no tools necessary.
Installation Instructions
John from San Ramon, CA
I needed new surface elements & burner bowls
This was about the simplest fix I've ever done. Just pulled off the old surface elements & burner bowls, wiped down the range top, and put in the new parts. Perfect fit. No problems at all. $$ well spent. ParsSelect shipped quickly, and they arrived well packaged. A+ experience all around. Thanks PartSelect. JA, San Ramon, CA Read more...
Drip Bowl - 8 Inch – Part Number: WB31T10011
Your Price
$18.58
   In Stock
General Electric Range Drip Bowl - 8 Inch
★★★★★
★★★★★
74 Reviews
PartSelect Number PS244395
Manufacturer Part Number WB31T10011
This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don't worry, it will fit your 8-inch burner. This bowl is used to catch drippings and food that falls when cooking on the oven element. The drip bowl might burn, become rusty, and wear down over time, and will need to be replaced. Replacing the drip pan is very easy. The elements on the oven must be removed to access the pan underneath. When replacing the bowl, make sure to line up the hole with the terminal block where the element plugs into, and always remove power to your appliance and ensure it is completely cool before commencing your repair. These drip bowls are sold individually, not as a set for your appliance, so you will need to purchase each separately if upgrading all the drip bowls for your range.
Fixes these symptoms
Installation Instructions
Tom from North Prairie, WI
Burner bowls needed replacement
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3 Read more...
Videos!
Bake Element – Part Number: WB30X46987
20% OFF
Your Price
$120.63
$150.79
   In Stock
General Electric Range Bake Element
★★★★★
★★★★★
102 Reviews
PartSelect Number PS17626202
Manufacturer Part Number WB30X46987
The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...
Installation Instructions
Ronald from Nassau, NY
Lower bake Element would not heat.
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect. Read more...
Bake Element - 240V – Part Number: WB44X200
Your Price
$45.68
   In Stock
General Electric Range Bake Element - 240v
★★★★★
★★★★★
136 Reviews
PartSelect Number PS249424
Manufacturer Part Number WB44X200
This is a 240 volt bake element for your oven or range. The kit comes with two installation screws and the element. The element functions by supplying heat from the bottom of the oven to bake or cook your food. You may need to replace the bake element if your oven is not heating properly. This is a black metal part (Width 13 inches, length 16.5 inches, depth 1-1/2 inches ) which can be installed onto your range with a screwdriver. Installation is rated as "medium" difficulty. This element is the part that heats to allow cooking, and if broken or missing you'll be unable to cook. This part attaches to the lower section of the range. Refer to your model number and user manual to ensure this part is right for you. Each screw gets screwed into each wire terminal with a Phillips screw driver. Hold the wires forward to make sure the wires do not fall back through the rear of the oven. Unplug your appliance or shut off your circuit breaker to the appliance before installing the new part.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...
Installation Instructions
Beth from Matthews, NC
Replacment of the bake unit
The hardest part was removing the old nuthead screws off the old bake burner. Once those were off installing the new bake element was simple. One screw in each wire terminal, two hex head screws to hold the unit in place. Works like a charm! Read more...
Knob - Stainless – Part Number: WB03X24818
Your Price
$24.57
   In Stock
General Electric Range Knob - Stainless
★★★★★
★★★★★
28 Reviews
PartSelect Number PS11729081
Manufacturer Part Number WB03X24818
Sold individually.
Installation Instructions
Felicia from WEST MEMPHIS, AR
knobs and burners were removed prior to purchase
placed on stove no tools needed perfect fit Read more...
GREASE FILTER – Part Number: WB02X32793
Your Price
$9.48
   In Stock
General Electric Range Grease Filter
★★★★★
★★★★★
1 Review
PartSelect Number PS12722303
Manufacturer Part Number WB02X32793
This is a grease filter compatible with various microwaves. Grease filters are used to collect food grease and prevent buildups on the internal components of the microwave, such as the fans and other electronics. This grease filter is made of mesh and measures 7.5 inches long by 5 inches wide. If your current microwave grease filter is clogged with grease and not able to be easily cleaned, it should be replaced. This filter can be replaced easily by pulling on its D-clasp and pushing the new filter into place. Depending on how many filters your microwave uses, you may want to consider how many you need before ordering. This filter is an OEM part and is sold individually.
Installation Instructions
Richard from SAN ANTONIO, TX
lamp out
unscrew small nut from glass plate underneath micro used a small Phillips screw driver and inserted new lamp into socket and Inserted glass plate and secured with small nut w/ screws drivet Read more...

General Electric Range Appliance Types

Back to Top

Related General Electric Range Parts

Back to Top

Popular General Electric Range Models

Below are the most popular General Electric Range models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
+View More
Back to Top