Estate Washer Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Estate Washer Switches
Your Price
$31.96
In Stock
Estate Washer Lid Switch
PartSelect Number PS11745957
Manufacturer Part Number WP8318084
This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. You will need a 5/16-inch nut driver for this repair. The package will contain one lid switch. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch.
Fixes these symptoms
- Burning smell
- Cycle Not Advancing
- Lid or door won’t close
- See more...
Installation Instructions
Clint from Kansas City, KS
Washer wouldn't run
I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side. To remove the switch, I first detached the wire to the control panel and unscrewed the grounding wire. The new switch drops right in. I had a little trouble getting it in until I realized the washer lid had to be open. A little awkward but once it's in you can shut the lid and then I reattached the wire from the control panel and screwed in the grounding wire. Pretty easy. $20 for the part (with shipping) and 15 minutes. Way cheaper than a repairman.
Read more...
Your Price
$20.53
In Stock
Estate Washer Lid Switch
PartSelect Number PS11723153
Manufacturer Part Number W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
Fixes these symptoms
- Will not agitate
- Will not drain
- Will Not Start
- See more...
Installation Instructions
Peter from Westbury, NY
washer would not start
To see if the lid switch was the problem I first jumped it out and tried to start the washer. That was the problem. I removed the main controll so I could get to the lid switch. I made the mistake of removing the screws all the way out and the metal clip fell into the body of the washer, no problem since I was changing the drive beld anyway. I realized that you do not remove the screws all the way out, you just have to loosen them and then slide out the lid switch & then replace it.
Read more...
Your Price
$37.78
In Stock
Estate Washer Lid Switch Assembly With Leads
2. Remove screws at control panel end caps.
3. Flip control panel back to expose wiring.
4. Detach lid switch wiring harness from control panel.
5. Use screwdriver to pry the 2 brass clips holding the back panel of the washer to the front and sides piece.
6. Tilt the front/sides piece over to expose lid switch.
7. Use nutdriver to detach ground wire.
8. Use screwdriver to remove 2 screws holding lid switch in place.
9. Install new lid switch. Make sure wiring harness piece is facing the right direction.
10. Put washer back together in same order it was disassembled. Make sure front/sides piece connects to the clips at the bottom. Read more...
PartSelect Number PS350434
Manufacturer Part Number 3949247
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
Fixes these symptoms
- Cycle Not Advancing
- Lid or door won’t close
- Not draining
- See more...
Installation Instructions
Travis from Pearland, TX
Washer stopped mid cycle
1. Unplug washer.2. Remove screws at control panel end caps.
3. Flip control panel back to expose wiring.
4. Detach lid switch wiring harness from control panel.
5. Use screwdriver to pry the 2 brass clips holding the back panel of the washer to the front and sides piece.
6. Tilt the front/sides piece over to expose lid switch.
7. Use nutdriver to detach ground wire.
8. Use screwdriver to remove 2 screws holding lid switch in place.
9. Install new lid switch. Make sure wiring harness piece is facing the right direction.
10. Put washer back together in same order it was disassembled. Make sure front/sides piece connects to the clips at the bottom. Read more...
Your Price
$39.72
In Stock
Estate Washer Lid Switch Assembly
I read the do-it-yourself explanation posted by Paul From Glendale CA and followed his instructions.
1. Unplugged the Washer and disconnected the hoses, so I could slide the washer into the kitchen.
2- Unfastened the two screws in the front lower corners of the controls panel and tilted is back. Unfastened the old lid-switch wiring from the control panel.
3. Remove the clips at the two corners under the control panel. I rotated the cover forward to clear it from the back and lifted it off and set it off to the side.
4. While I had the Washer disassembled I vacuumed out all the accumulation of dust, etc.
5. Removed the lid switch and unfastened the ground wire.
6. Installed the new switch and reassembled the Washer.
7. I did not read Paul's reassembly instructions closely enough. The front flange of the cover goes UNDER the steel frame on the washer. I spent 30 minutes trying to get the cover on, then finally figured that out on my own. Once I got the flange under the frame, it took about five minutes to get the cover on, the clips in and the control panel back into positions and reassembled.
The entire process is not particularly difficult. Had I read the "UNDER the frame" part earlier, the entire repair would have taken no more than 45 minutes.
Having another person to help reinstall the cover would be helpful. The cover is not heavy but it is a little awkward to handle and having another person to help line up the back cover, etc. will make the reassembly even easier. Read more...
PartSelect Number PS334600
Manufacturer Part Number 285671
This part makes sure that the lid is shut before allowing the machine to start or agitate.
Fixes these symptoms
- Will not agitate
- Will not drain
- Will Not Start
- See more...
Installation Instructions
Fred from Midlothian, VA
Washing Machine kept cutting off mid-cycle
I had to remove the washing machine from the laundry room (our laundry room is pretty small).I read the do-it-yourself explanation posted by Paul From Glendale CA and followed his instructions.
1. Unplugged the Washer and disconnected the hoses, so I could slide the washer into the kitchen.
2- Unfastened the two screws in the front lower corners of the controls panel and tilted is back. Unfastened the old lid-switch wiring from the control panel.
3. Remove the clips at the two corners under the control panel. I rotated the cover forward to clear it from the back and lifted it off and set it off to the side.
4. While I had the Washer disassembled I vacuumed out all the accumulation of dust, etc.
5. Removed the lid switch and unfastened the ground wire.
6. Installed the new switch and reassembled the Washer.
7. I did not read Paul's reassembly instructions closely enough. The front flange of the cover goes UNDER the steel frame on the washer. I spent 30 minutes trying to get the cover on, then finally figured that out on my own. Once I got the flange under the frame, it took about five minutes to get the cover on, the clips in and the control panel back into positions and reassembled.
The entire process is not particularly difficult. Had I read the "UNDER the frame" part earlier, the entire repair would have taken no more than 45 minutes.
Having another person to help reinstall the cover would be helpful. The cover is not heavy but it is a little awkward to handle and having another person to help line up the back cover, etc. will make the reassembly even easier. Read more...
Your Price
$111.10
In Stock
Estate Washer Water Level Pressure Switch
PartSelect Number PS3408149
Manufacturer Part Number W10339251
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
Fixes these symptoms
- Water Filling Issues
- See more...
Installation Instructions
Chris from LIBERTY TWP, OH
Washer was not filling with water to proper level (was filling some, not enough)
Ordered part PS3408149 from partselect.com. Lifted Washer control panel with putty knife. Removed hinges (regular screwdriver, used as a crowbar rather than screwdriver) holding control panel to washer body. Moved washer body panel out of the way, and reviewed level sensor/level selector switch. Take handle off front of selector switch. Twist selector switch off from inside (90 degree turn till square inset lines up withsquare hole, then it will come out). Insert new selector switch. Remove old tubing. Fish new tubing through where old tubing was. Cut off extra tubing, then push tubing onto selector switch and tub basin (where old tubing was). Put washer back together. Done. Worked perfectly.
Read more...
Your Price
$76.39
In Stock
Estate Washer Temperature Switch 4 Positions
PartSelect Number PS11749784
Manufacturer Part Number WPW10184148
This part regulates the temperature of the water in the tub.
Fixes these symptoms
- No hot or cold water
- See more...
Installation Instructions
stephen from Coventry, RI
Automatic water temperature switch failed
removed two screws and atc knob. swung control panel out. unplugged atc switch. pushed little tab down and turned the switch. it popped out and I put the new one in. plugged the cable back in. repositioned the control panel. replaced the atc knob and turned it to rinse. Voila!!! it works.
Read more...
Your Price
$95.01
In Stock
Estate Washer Water Level Switch
I respect that electrical parts are non-returnable as I am in the auto parts business. Read more...
PartSelect Number PS11723158
Manufacturer Part Number W10820051
This water level switch senses the level of water in the inner tub.
Installation Instructions
GREIG from CARTERSVILLE, GA
washer overflowing
Repair was easy enough by just unlocking the tab and twisting the switch out from under the control panel. For me though, this did not fix my overflowing issue. After more research I found the inlet valve needed to be cleaned out.I respect that electrical parts are non-returnable as I am in the auto parts business. Read more...
Your Price
$54.40
In Stock
Estate Washer Water Level Pressure Switch
PartSelect Number PS3408073
Manufacturer Part Number W10335056
This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and the washing program begins.
Installation Instructions
Wayne from University City, MO
Water control would only fill to Medium load then stopped altogether
I removed the screws holding the control board in place. Removed the knob on the front of the panel and then disconected the wires to the control. Then I took the old control off the board and inserted the new control. I attached the wire connectors to the new control and put the control panel back in place and fastened it with the screws. Last task was to replace the knob. The new control worked wonderfully with the first load of laundry. Piece of cake. Done in 5 minutes or less.
Read more...
Your Price
$54.40
In Stock
Estate Washer Water Level Switch
PartSelect Number PS3408118
Manufacturer Part Number W10337780
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
Installation Instructions
Jonathan from Hayden, ID
Tank was overfilling, lots of water on the floor, not good.
Disassembled the control panel and replaced the water level sensor, but not the hose - bad idea. It was probably just the hose. The thing tested fine for 3 fillings. I told my friend to watch it closely for the first couple of loads, because I thought the level was not consistent? - but she didn't. More water on the floor. Replaced the hose and it's working fine. Thank you.
Read more...
Your Price
$68.26
In Stock
Estate Washer Cycle Selector Switch
PartSelect Number PS11749403
Manufacturer Part Number WPW10168257
Also known as Rotary Switch.