Dishwasher Spray Arms

Dishwasher Lower Spray Arm

★★★★★

★★★★★

143 Reviews

The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.

Dishwasher Lower Spray Arm

★★★★★

★★★★★

35 Reviews

This lower spray arm assembly in your dishwasher distributes water and detergent during the washing cycle by spinning around and spraying water in different directions. You can usually find it attached to a support or hub at the bottom of the dishwasher. If this part is broken, you might notice some signs. You might hear a knocking or banging sound coming from the dishwasher. The spray arm may not rotate properly or might seem wobbly. It is important to replace a damaged arm assembly as your dishes will not get cleaned properly, and they will still have dirt on them even after a wash cycle. It can also cause the dishwasher to have a bad smell because of leftover food residue. To remove your existing arm assembly, you will need to release its locking mechanism before lifting it out of your appliance. Please be informed that this OEM-verified part is sold individually.

Dishwasher Lower Spray Arm

★★★★★

★★★★★

84 Reviews

This lower spray arm assembly is a device in your dishwasher that distributes water and detergent during the washing cycle. Its rotating motion sprays water in multiple directions, ensuring thorough cleaning. Typically, it is attached to a support or hub at the bottom of the dishwasher. When this part is broken, there are noticeable signs to be aware of. You might hear knocking or banging sounds coming from the dishwasher. The spray arm may be wobbly or unable to rotate. If a broken arm assembly is not replaced, your dishes may still have dirt on them even after a wash cycle. Additionally, leftover food residue can result in an unpleasant smell within the dishwasher. To remove the existing arm assembly, simply grasp the center of it and lift it up so that it unsnaps from your dishwasher. Please note that this OEM-sourced part is sold individually.

Dishwasher Middle Spray Arm Kit

★★★★★

★★★★★

144 Reviews

This middle spray arm kit includes an upper spray arm, a holder or hanger, water supply tube or delivery tube, split ring seal, and a screw. The function of these parts is to spray water to all levels of the dishwasher so the dishes will come out completely clean. This kit has recently been redesigned. It does not include the upper support or mount, so consider ordering those parts as well if necessary. The spray arm is approximately 18 inches long, and all parts are white in colour. The only tool you will need to complete this repair is a Phillips screw driver.

Dishwasher Lower Spray Arm

★★★★★

★★★★★

57 Reviews

The spray arm rotates and sprays water to clean the dishes inside the dishwasher tub. This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & Electrolux. Possible Repair Solution For: Not cleaning properly, unusual noises, leaking water.

Dishwasher Lower Spray Arm Support

★★★★★

★★★★★

20 Reviews

This lower spray arm is a genuine OEM part for various makes and models of dishwasher and is sold as an individual part. This part attaches to the lower spray assembly of your dishwasher and the lower spray arm itself clips into this part to facilitate its spinning movement during the washing cycle. To replace it, remove the spray arm by pulling it out, remove the surrounding circular clip and then twist to remove this bit. Made completely of plastic, this part measures approximately 3-inches deep, 2-inches wide, and 3.125-inches tall.

Dishwasher Mid Spray Arm

★★★★★

★★★★★

12 Reviews

This OEM mid spray or center wash arm assembly distributes water and detergent in your dishwasher during the wash cycle. It has small nozzles that spray water onto your dishes and is located between the lower and upper rack. A broken assembly will result in weak water flow and ineffective dishwashing. It may also display signs of damage such as cracks, breaks, or missing nozzles. Additionally, a malfunctioning assembly can cause imbalanced water flow, potentially leading to damage to other dishwasher components such as filters or pumps. Prompt replacement is necessary to ensure proper dishwashing performance and prevent further damage. To install this to your appliance, you will need to snap its mounting bracket onto the rack before attaching the arms onto it. This replacement part is sold individually.

Dishwasher Lower Spray Arm

★★★★★

★★★★★

36 Reviews

This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in color and is about 20 inches long. You may need to replace this part if the water is not being distributed.

Dishwasher Lower Spray Arm

★★★★★

★★★★★

3 Reviews

This lower spray arm is an authentic OEM part that is compatible with dishwashers. It is found at the bottom of the dishwasher where it is attached to a rotating mechanism. When the dishwasher is in operation, water is pumped through the spray arm, which rotates to distribute this water through the dishwasher. This rotation ensures that water reaches all areas of the dishwasher tub for a thorough cleaning. If the spray arm is faulty, you may notice that some of your dishes are still dirty at the end of the cycle or you may hear unusual rattling noises while the dishwasher is running. The spray arm will need to be replaced if it can no longer function properly.

Dishwasher Orbital Sprayer

★★★★★

★★★★★

8 Reviews

This orbital sprayer is an authentic OEM replacement part that is designed to fit with various models of dishwashers. It is blue in color and has a diameter of 8 inches. The sprayer is located at the bottom of the dishwasher beneath the lower dish rack. It is responsible for directing pressurized water and detergent onto dishes during the cleaning process. This ensures that the dishes are cleaned thoroughly and evenly. The orbital movement of the sprayer helps to maximize cleaning efficiency reaching into hard-to-reach places. Replacing the sprayer is a simple process, simply twist off the faulty sprayer and snap the new one into place.