Crosley Washer Switches

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Crosley Appliance Parts
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Part Type

Popular Crosley Washer Switches

Videos!
Your Price
$45.93
  In Stock
Crosley Washer Lid Switch
★★★★★
★★★★★
88 Reviews
PartSelect Number PS11745957
Manufacturer Part Number WP8318084
This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. You will need a 5/16-inch nut driver for this repair. The package will contain one lid switch. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch.
Fixes these symptoms
  • Burning smell
  • Cycle Not Advancing
  • Lid or door won’t close
  • See more...
Installation Instructions
Clint from Kansas City, KS
Washer wouldn't run
I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side. To remove the switch, I first detached the wire to the control panel and unscrewed the grounding wire. The new switch drops right in. I had a little trouble getting it in until I realized the washer lid had to be open. A little awkward but once it's in you can shut the lid and then I reattached the wire from the control panel and screwed in the grounding wire. Pretty easy. $20 for the part (with shipping) and 15 minutes. Way cheaper than a repairman. Read more...
Your Price
$55.32
  In Stock
Crosley Washer Water Level Switch
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11754877
Manufacturer Part Number WPW10448876
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
Fixes these symptoms
  • Draining Issues
  • Water Filling Issues
  • Will not drain
  • See more...
Installation Instructions
George from ORO VALLEY, AZ
Door locked because of faulty water level switch
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping. Read more...
Videos!
Your Price
$29.84
  In Stock
Crosley Washer Door Switch Kit
★★★★★
★★★★★
20 Reviews
PartSelect Number PS1964648
Manufacturer Part Number W10169313
This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start, or does not tumble, replacing the door switch can solve this appliance problem. The tools needed for replacement are a screw driver and wire strippers. Make sure to attach the two wires to the right two poles of the new switch, to do this you can check the resistance of the switch. Unplug the dryer before installing this part, also refer to the diagram provided by the manufacturer.
Fixes these symptoms
Installation Instructions
Don from Jacksonville, FL
Switch sticking in on position
FIRST unplug dryer from electrical source, CAUTION, the top of this dryer does not open with clips, do not pry on top to open! On the front of the dryer look under the lower panel, and find two screws, one on the left side, and one on the right, remove these screws, and pull slightly down on panel to remove. Behind this panel find two screws holding the door panel, one on the left, and one on the right, remove the left, and support the door panel while removing the right side. Gently pull the bottom of door panel outward, and the clips on top of door panel will unhinge from top, carefully rotate left side of door panel to floor, and note the wire connections on switch, and orientation of switch, then unplug wires, and move door panel to a comfortable working positon. Door must be open to remove switch, then depress the two plastic retaining keepers on each side of switch, and push switch through toward door. Replace with new switch, reconnect the wires, and reassymble in reverse order. Remember, door assymbly must be inserted in dryer top at an angle, and then bottom rotated downward, and bottom panel nylon guildes inserted into door panel bottom. Read more...
Videos!
Your Price
$37.79
  In Stock
Crosley Washer Lid Switch Assembly With Leads
★★★★★
★★★★★
87 Reviews
PartSelect Number PS350434
Manufacturer Part Number 3949247
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
Fixes these symptoms
  • Cycle Not Advancing
  • Lid or door won’t close
  • Not draining
  • See more...
Installation Instructions
Travis from Pearland, TX
Washer stopped mid cycle
1. Unplug washer.
2. Remove screws at control panel end caps.
3. Flip control panel back to expose wiring.
4. Detach lid switch wiring harness from control panel.
5. Use screwdriver to pry the 2 brass clips holding the back panel of the washer to the front and sides piece.
6. Tilt the front/sides piece over to expose lid switch.
7. Use nutdriver to detach ground wire.
8. Use screwdriver to remove 2 screws holding lid switch in place.
9. Install new lid switch. Make sure wiring harness piece is facing the right direction.
10. Put washer back together in same order it was disassembled. Make sure front/sides piece connects to the clips at the bottom. Read more...
Your Price
$84.08
  In Stock
Crosley Washer Water Level Pressure Switch
PartSelect Number PS2349296
Manufacturer Part Number 134762010
Installation Instructions
donna from gardnerville, NV
not cycling
put new part did reset on main controles Read more...
Videos!
Your Price
$108.64
  In Stock
Crosley Washer Water Level Switch
★★★★★
★★★★★
5 Reviews
PartSelect Number PS3408119
Manufacturer Part Number W10337781
This water level switch senses the level of water in the inner tub.
Your Price
$42.65
  In Stock
Crosley Washer Switch
★★★★★
★★★★★
1 Review
PartSelect Number PS2330879
Manufacturer Part Number 134813600
This switch is for a dryer door without a drum light.
Installation Instructions
Thomas F. from Whitmire, SC
clothes hanging-up during the drying cycle,leaving marks on the garments.
as on the video. so easy. took longer to clean-up Read more...
Your Price
$17.78
  In Stock
Crosley Washer Door Switch
PartSelect Number PS2367765
Manufacturer Part Number 134813660
Your Price
$133.52
  In Stock
Crosley Washer Water Level Pressure Switch
★★★★★
★★★★★
7 Reviews
PartSelect Number PS3408149
Manufacturer Part Number W10339251
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
Installation Instructions
Chris from LIBERTY TWP, OH
Washer was not filling with water to proper level (was filling some, not enough)
Ordered part PS3408149 from partselect.com. Lifted Washer control panel with putty knife. Removed hinges (regular screwdriver, used as a crowbar rather than screwdriver) holding control panel to washer body. Moved washer body panel out of the way, and reviewed level sensor/level selector switch. Take handle off front of selector switch. Twist selector switch off from inside (90 degree turn till square inset lines up withsquare hole, then it will come out). Insert new selector switch. Remove old tubing. Fish new tubing through where old tubing was. Cut off extra tubing, then push tubing onto selector switch and tub basin (where old tubing was). Put washer back together. Done. Worked perfectly. Read more...
Your Price
$87.60
  In Stock
Crosley Washer Temperature Switch - 4 Positions
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11749784
Manufacturer Part Number WPW10184148
This part regulates the temperature of the water in the tub.
Fixes these symptoms
Installation Instructions
stephen from Coventry, RI
Automatic water temperature switch failed
removed two screws and atc knob. swung control panel out. unplugged atc switch. pushed little tab down and turned the switch. it popped out and I put the new one in. plugged the cable back in. repositioned the control panel. replaced the atc knob and turned it to rinse. Voila!!! it works. Read more...

Related Crosley Washer Parts

Back to Top