Crosley Washer Pulleys

Find Your Part

Model number locator Need help finding your model number?
PartSelect 25 Year
Crosley Appliance Parts
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Part Type

Popular Crosley Washer Pulleys

Videos!
30% OFF
Your Price
$37.86
$54.33
  In Stock
Crosley Washer Drive Pulley
★★★★★
★★★★★
21 Reviews
PartSelect Number PS10057144
Manufacturer Part Number W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.
Fixes these symptoms
  • Burning smell
  • Noisy and Marks Left on Clothes
  • Shaking and Moving
  • See more...
Installation Instructions
Jerry from WALLA WALLA, WA
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done. Read more...
Videos!
Your Price
$60.72
  In Stock
Crosley Washer Transmission Pulley and Bearing Kit
★★★★★
★★★★★
16 Reviews
PartSelect Number PS2003651
Manufacturer Part Number 12002213
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race washer. These genuine Whirlpool parts are plastic and are not sold individually. The kit is used to help the washer drain, and may need to be replaced if the washer is experiencing slow or no spin, will not drain, or has no agitation. The washer will need to be tilted on its back or side to access the bottom. The tools needed to complete this repair are a small flat blade screw driver and a pair of slip joint pliers.
Fixes these symptoms
  • Burning smell
  • Spinning Issues
  • Spins slowly
  • See more...
Installation Instructions
James from Hueytown, AL
Washer tub would not spin, pump would empty water from tub.
Lay washer on front, removed belt. Removed center pulley with thrust bearing (pulley was worn on upper end, against thrust bearing, thrust bearing was worn also). Installed new thrust bearing & pulley kit. Cleaned & lubed slots that motor insulators slide in, installed new belt. Read more...
Your Price
$28.48
  In Stock
Crosley Washer Plastic Motor Pulley
★★★★★
★★★★★
1 Review
PartSelect Number PS11738804
Manufacturer Part Number WP21001108
This motor pulley is only an inch high and is two and a half inches in diameter. It is all black in color and is made entirely of plastic.
Fixes these symptoms
  • Burning smell
  • Will not agitate
  • Will not drain
  • See more...
Installation Instructions
Kevin from Berwick, ME
worn belt & burnt motor pulley
First, I looked at the site for instructions on what was wrong, it explained in full detail what and how to remove and replace. We called a local Maytag dealer and told them the part number that the site told us to order and they told us we needed a whole new motor with the plastic motor pulley. they told us the part does not come separate, so we went back to the site and ordered a $6.00 part and paid a small s/h charge and when it came in we went back to the site to see how to put it back together and the instructions were perfectly awesome. The $6 part is what we actually needed not the $178 complete motor that the dealer told us we had to buy. Thanks for this wonderful site it saved us lots of money. this is the 3rd time we order from this site and the instructions we correct all 3 times, I would recommend this site to all who has a home with repairs! Thank you for putting a well useful site together. Read more...
Your Price
$46.57
  In Stock
Crosley Washer Idler Pulley Wheel
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11742250
Manufacturer Part Number WP40045001
This wheel has a center metallic bearing. A dryer's idler pulley wheel serves to help the belt to rotate the drum.
Fixes these symptoms
Installation Instructions
Lucas from Nuevo, CA
Need it a new pulley and belt
I did the repair all by my self and just payed for the parts. Read more...
Your Price
$115.73
  In Stock
Crosley Washer Pulley
PartSelect Number PS2020240
Manufacturer Part Number 22002315
Installation Instructions
Loanne from W BROOKFIELD, MA
Washer was so loud in the spinning cycle it sounded like a jet was taking off
We took the washer completely apart. Replaced the bearings, pulley and
belt. We decided to replace anything that involved the spinning cycle while we had it all apart.
It was well worth the time and effort we put into it. It works like a chime
and is very quiet . Silence is golden ! Hopefully it will work another 18 years. Read more...
Your Price
$43.81
  Special Order
Crosley Washer PULLEY
PartSelect Number PS1961283
Manufacturer Part Number W10143344

Related Crosley Washer Parts

Back to Top