Crosley Refrigerator Wheels and Rollers

Your Price

$11.92

Crosley Refrigerator Roller

★★★★★

3 Reviews

PartSelect Number PS12071116

Manufacturer Part Number 5304508016

This crisper pan roller is sourced directly from the manufacturer for use in your refrigerator. It is a genuine OEM part that is designed to fit just like the original for your convenience. The roller is a plastic wheel-like component that attached to the sides of the crisper pan and allows it slide in and out of the refrigerator smoothly. The rollers allow users to easily and conveniently access the contents of the drawers. Over time, the roller may wear down, break, or fall off. If the roller is faulty, you may notice difficulty sliding the drawer in and out, or the drawer may feel loose and unstable when you pull it out. Each crisper pan roller is sold individually. Ensure that you order the correct number of rollers for your refrigerator.

Fixes these symptoms

Door won’t open or close
See more...

Installation Instructions

hellen from SPRINGFIELD, MO

Roller screw recipients broke out. Can't be repaired.

Was not able to repair. Wasn't rollers I needed. Plastic screw recipients in front on frame had broken out so rollers weren't the problem. Tried gluing back pieces to no avail. Crisper frames are poorly designed. Read more...

Videos!

Your Price

$24.88

Crosley Refrigerator Cab Roller

★★★★★

2 Reviews

PartSelect Number PS11755335

Manufacturer Part Number WPW10475495

Sold individually.

Installation Instructions

Hans from OGDEN, UT

Raise side of fridge and slide 2x4 under side with broken wheel.

Remove back side cardboard access cover. About 6 dcrews need to be removed. Remove 9/16” bolt and lower compressor tray frame down to slide out wheel axel. Place wheel in slot and replace axel. Lift compressor tray and replace 9/16” bolt. Replace cardboard cover. Remove 2x4. Read more...

Videos!

Your Price

$26.87

Crosley Refrigerator Front Roller

★★★★★

4 Reviews

PartSelect Number PS11738962

Manufacturer Part Number WP2166108

Sold individually. Hardware not included. Roller only.

Installation Instructions

Tony from Chicago, IL

Right front wheel broke

Definatly a two man job. I suggest you put a pad down to protect your floor. Remove the filter, grill, and bolts per instructions. Everything is straight forward. Move the frame back 1/2 to 1 inch then tilt the frig back on it's side about 4 inches. If the frame doesn't drop down, move it back until the front of the frame comes of the front lip of the frig. Place a block under the frig lip NOT the frame and WATCH YOUR FINGERS. The wheel should be hanging down. Just pull out the pin, replace the wheel (make sure you have it facing the correct way) and tilt back and pull the blocks. Move the frig back in place and replace the bolts. Took me and a buddy less than 30 minutes. Read more...

Your Price

$28.87

Crosley Refrigerator Crisper Drawer Roller

★★★★★

1 Review

PartSelect Number PS7321350

Manufacturer Part Number 242236801

Sold individually.

Your Price

$30.86

Crosley Refrigerator Drawer Wheel Support

PartSelect Number PS2350567

Manufacturer Part Number 241770301

Fixes these symptoms

Door won’t open or close
See more...

Your Price

$55.36

Crosley Refrigerator Cab Roller

PartSelect Number PS11752444

Manufacturer Part Number WPW10304660

Videos!

Your Price

$35.85

Crosley Refrigerator Roller Assembly

PartSelect Number PS11723468

Manufacturer Part Number 5304499445

Sold individually.

Videos!

Your Price

$10.42

Crosley Refrigerator Single Roller

★★★★★

2 Reviews

PartSelect Number PS11738235

Manufacturer Part Number WP10450603

This wheel is sold individually. It is located on the bottom of the refrigerator.

Installation Instructions

mike from holly springs, NC

Left front plastic wheel was broken

Pop loose the plastic grate at the bottom.

Locate and remove the wheel leveling screw from the front bottom corner.

Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.

Lift out the wheel assembly.

Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.

Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.

Reinstall and adjust wheel assembly. Read more...